New developments in the tech sector always bring new job opportunities. These new jobs have to be filled with the NS0-522 certification holders. So to fill the space, you need to pass the NS0-522 Exam. Earning the NS0-522 certification helps you clear the obstacles you face while working in the Network Appliance field.
| Section | Objectives |
|---|---|
| Topic 1: ONTAP SAN Concepts | - Data protection concepts - Switch and host configuration concepts - Storage space utilization and management concepts - Storage controller configuration concepts |
| Topic 2: ONTAP SAN Solution Assessment | - Solution design and hardware provisioning - Environmental and physical considerations - Installation planning and configuration tools - Prerequisites and inventory for SAN components |
| Topic 3: ONTAP SAN Implementation and Configuration | - NVMe configuration - Clustered storage systems and node configuration - Fibre Channel Protocol (FCP) configuration - iSCSI configuration - Storage Virtual Machine (SVM) configuration - Switch, host, data protection and storage management |
| Topic 4: ONTAP SAN Implementation Testing and Troubleshooting | - Implementation validation and testing tasks - Connectivity and performance troubleshooting - Data migration tasks |
>> NS0-522 Latest Test Report <<
Are you looking for the best way to get Network Appliance NS0-522 certified and advance your career? The NS0-522 Dumps PDF of the TestPDF is the perfect choice for you. Cracking the NS0-522 test for the Network Appliance NS0-522 Certification can be a daunting process, but with the help of our NS0-522 preparation material, you'll be able to achieve the Network Appliance NS0-522 certification you're looking for.
NEW QUESTION # 69
A customer is using a new two-node NetApp All SAN Array (ASA) configuration with SnapMirror active sync. To verify that everything is set up correctly, the customer is reviewing the number of paths on the ESXi hosts.
How many paths should the customer see?
Answer: C
Explanation:
Eight Active/Optimized paths and zero Active/Unoptimized paths is the correct result for the described ASA configuration. NetApp All SAN Array systems use symmetric active-active multipathing, under which all valid paths to a LUN are presented as active and optimized. NetApp's VMware guidance likewise states that ESXi recognizes ASA storage as symmetric and uses the active paths with round-robin multipathing. With SnapMirror active sync and the host connected through the intended redundant paths, the expected path presentation therefore does not contain the Active/Unoptimized paths characteristic of asymmetric access on non-ASA configurations. The key distinction is that ASA pathing is designed to avoid waiting for an ALUA transition after a controller failure. Relevant SAN ONTAP topics are ASA symmetric active-active, ALUA, ESXi multipathing, SnapMirror active sync, and redundant SAN paths.
NEW QUESTION # 70
An administrator is troubleshooting a SAN network issue where the NVMe/TCP LIF keeps disconnecting.
Which command helps the administrator investigate this issue?
Answer: D
Explanation:
The network port reachability show command is the best troubleshooting choice because it validates Layer-2 reachability for ONTAP Ethernet ports against their expected broadcast domains. NetApp documents that this command reports expected reachability, actual reachability, and conditions such as misconfigured reachability, making it directly useful when an NVMe/TCP LIF repeatedly disconnects because of an underlying network-path or VLAN/broadcast-domain problem. ipspace show only displays IPspace configuration, and vserver nvme subsystem show focuses on NVMe subsystem objects rather than Ethernet path health. cluster ping-cluster tests the cluster network and is not the correct diagnostic for a client-facing NVMe/TCP data LIF. Relevant SAN ONTAP topics are NVMe/TCP networking, Ethernet port reachability, broadcast domains, VLAN connectivity, and SAN network troubleshooting.
NEW QUESTION # 71
An administrator has a NetApp AFF cluster with two SVMs serving LUNs. SnapMirror active sync is configured, and a disaster recovery test is planned over the weekend.
Which NetApp ONTAP command will show the status of this test?
Answer: B
Explanation:
To check the status of a SnapMirror active sync disaster recovery test on a NetApp ONTAP cluster, you would use the command snapmirror failover show. This command provides the necessary details about the failover status, helping administrators verify if the disaster recovery test is proceeding as expected. It displays the status of the failover groups and their readiness, which is essential for confirming the effectiveness of the disaster recovery setup.
For more detailed information on SnapMirror commands and their usage, refer to:
* NetApp Documentation - SnapMirror Commands ( NetApp Community ) ( NetApp Community ).
NEW QUESTION # 72
A customer has a LUN that is already mapped and connected to a host using FCP. They now want to map the same LUN to another host using iSCSI.
Which two tasks would enable the administrator to share the LUN? (Choose two.)
Answer: A,D
Explanation:
ONTAP igroups can be created with an fcp, iscsi, or mixed protocol type. An iSCSI igroup is therefore valid for presenting the existing LUN specifically to the new iSCSI host. A mixed igroup is also valid because it permits both Fibre Channel and iSCSI initiators and can be used when access to a LUN involves both protocol types. ONTAP permits an igroup to be mapped to multiple LUNs and a LUN to be presented through appropriate SAN igroup mappings. Creating another FC-only igroup would not accommodate the new iSCSI initiator. A subsystem belongs to the NVMe architecture and is used to map NVMe namespaces to NVMe hosts; it is not used for FCP or iSCSI LUN presentation. Thus, both iSCSI and mixed igroups are valid configurations for the requirement.
NEW QUESTION # 73
A customer has recently installed a new NetApp AFF system and Cisco Nexus 9000 Series switches for their SAN workload. The administrator is tasked with configuring interface groups for port-based load balancing.
Which two commands are required? (Choose two.)
Answer: B,D
Explanation:
ONTAP interface groups support several traffic-distribution algorithms, including port, which distributes traffic using transport-layer TCP or UDP port information. Therefore, network port ifgrp create -distr-func port establishes the corresponding ONTAP-side distribution behavior. The connected Cisco Nexus infrastructure should use a compatible port-channel hashing method; NetApp validated architectures show port-channel load-balance src-dst l4port for Nexus switches so source and destination Layer-4 ports contribute to traffic distribution. This improves utilization across member links compared with algorithms using fewer flow attributes. The original V9.02 text contained the typographical string 14port; the correct command parameter is l4port, meaning Layer 4 port. Options C and D do not establish the requested port-based load- balancing algorithm. Relevant SAN ONTAP topics include interface groups, port distribution functions, link aggregation, and Nexus port-channel hashing.
NEW QUESTION # 74
......
If you prefer to prepare your exam on paper, our NS0-522 training materials will be your best choice. NS0-522 PDF version is printable, and you can print it into hard one, and you can take them with you, and can study them anytime. In addition, NS0-522 exam dumps offer you free demo to try, so that you can know the mode of the complete version. If you buy NS0-522 Exam Dumps from us, you can get the download link and password within ten minutes. We provide you with free update for one year if you buy NS0-522 exam dumps.
New NS0-522 Test Registration: https://www.testpdf.com/NS0-522-exam-braindumps.html