Reliable H19-404_V1.0 Dumps Files, Valid H19-404_V1.0 Exam Experience

Our H19-404_V1.0 study practice guide takes full account of the needs of the real exam and conveniences for the clients. Our H19-404_V1.0 certification questions are close to the real exam and the questions and answers of the test bank cover the entire syllabus of the real exam and all the important information about the exam. Our H19-404_V1.0 Learning Materials can stimulate the real exam's environment to make the learners be personally on the scene and help the learners adjust the speed when they attend the real H19-404_V1.0 exam.

Huawei H19-404_V1.0 Exam Syllabus Topics:

SectionObjectives
WLAN Planning and Design- Capacity and performance design considerations
- Wireless coverage planning
Network Security Design- Access control strategies
- Campus security architecture considerations
Presales Solution Design- Customer requirement analysis
- Solution proposal and design methodology
Huawei Campus Network Solutions- iMaster NCE-Campus management platform
- CloudCampus solution architecture
Switching and Routing in Campus Networks- Layer 2 and Layer 3 design principles
- VLAN and segmentation design
Campus Network Fundamentals- Typical campus network deployment models
- Enterprise campus network architecture principles

>> Reliable H19-404_V1.0 Dumps Files <<

Valid H19-404_V1.0 Exam Experience & Reliable H19-404_V1.0 Exam Materials

Without bothering to stick to any formality, our H19-404_V1.0 learning quiz can be obtained within five minutes. No need to line up or queue up to get our practice materials. No harangue is included within H19-404_V1.0 training materials and every page is written by our proficient experts with dedication. Our website experts simplify complex concepts and add examples, simulations, and diagrams to explain anything that might be difficult to understand. so even ordinary examiners can master all the learning problems without difficulty. In addition, H19-404_V1.0 candidates can benefit themselves by using our test engine and get a lot of test questions like exercises and answers.

Huawei HCSE-Presales-Campus Network Planning and Design V1.0 Sample Questions (Q15-Q20):

NEW QUESTION # 15
Which solution can be used when users need to centrally control and manage Internet access traffic but do not have the required security-processing capability?

Answer: C

Explanation:
Professional security devices should be deployed at the headquarters or another centralized Internet-access site. Under centralized Internet access, branch Internet traffic is first carried through the SD-WAN overlay to the centralized gateway. The headquarters security infrastructure then performs access control and security inspection before forwarding the traffic to the Internet.
This approach is appropriate when branch CPEs lack sufficient processing capacity or advanced security functions. A centralized firewall or dedicated security platform can provide intrusion prevention, antivirus inspection, URL filtering, application control, content security, and unified logging. It also allows the enterprise to enforce one consistent security policy instead of maintaining separate advanced configurations at every branch.
Deploying advanced security capabilities on each CPE, as proposed in option C, is a distributed local- breakout design and does not satisfy the stated limitation concerning security-processing capability. Third- party cloud security services can be used in some site-to-cloud or secure Internet-access architectures, but they are not the intended headquarters-based centralized solution in this question.
Huawei explicitly states that centralized Internet traffic is diverted to the centralized access site and that the firewall function is deployed there to secure Internet services. Therefore, option D is correct.


NEW QUESTION # 16
Which of the following BGP NLRI address-family combinations is used to transmit SD-WAN tunnel encapsulation information?

Answer: A

Explanation:
AFI 1 with SAFI 74 is the correct combination. In Multiprotocol BGP, the Address Family Identifier defines the basic network-layer address family, while the Subsequent Address Family Identifier specifies how the associated NLRI is interpreted. AFI 1 represents IPv4. SAFI 74 is assigned for SD-WAN capabilities and is used to distribute information required for SD-WAN edge discovery and tunnel establishment, including transport and encapsulation-related attributes.
The other combinations represent different forms of reachability information. AFI 1/SAFI 1 is ordinary IPv4 unicast NLRI. AFI 1/SAFI 2 represents IPv4 multicast reachability. AFI 25 represents Layer 2 VPN information, while SAFI 70 represents Ethernet VPN routes; that combination is associated with EVPN rather than the specific SD-WAN capability NLRI requested.
Huawei's architecture uses BGP-based control channels to exchange transport network port information, IPsec security-association information, and service routes. These parameters allow edge devices to determine peer endpoints and create GRE or GRE-over-IPsec data channels after the relevant service routes trigger tunnel establishment.


NEW QUESTION # 17
iMaster NCE-Campus can identify terminals. Which of the following services can be provided after terminal identification?

Answer: A,B,D

Explanation:
After identifying a terminal, iMaster NCE-Campus can use the identification result for security monitoring, visibility, and policy automation. Spoofing detection is supported because the platform can compare a terminal's current type and traffic behavior with its previously identified characteristics. For example, if a device originally identified as an IP phone suddenly behaves like a PC, the system can generate a spoofing alarm or apply an isolation policy.
Terminal identification also supports statistics and reporting by vendor, operating system, device category, access port, and policy status. Huawei explicitly describes terminal-type statistics, report export, and visibility of access policies.
In addition, iMaster NCE-Campus can automatically deliver VLAN, security-group, QoS, authentication, and access-permission policies according to the identified terminal type. Option B is incorrect because wired authentication is an admission process, not a service produced after terminal identification. Therefore, A, C, and D are correct.


NEW QUESTION # 18
Which of the following are Target Wake Time (TWT) technologies?

Answer: B,C,D

Explanation:
Broadcast TWT, Individual TWT, and Implicit TWT are valid Target Wake Time concepts. Individual TWT establishes a wake schedule between an AP and a specific station. Broadcast TWT advertises scheduling information that multiple stations can use, reducing individual negotiation overhead and coordinating groups of devices. An implicit TWT agreement defines a repeating schedule in which subsequent wake times are calculated from the agreed wake interval instead of being renegotiated for every service period.
These mechanisms allow stations, particularly battery-powered IoT devices, to sleep for predictable periods and wake only when transmission or reception is scheduled. TWT consequently reduces power consumption, channel contention, collisions, and unnecessary medium access in dense WLAN environments. Research describing IEEE 802.11ax TWT confirms that the mechanism schedules station transmission periods and allows stations to remain asleep outside their negotiated service periods.
"Multicast TWT" is not one of the standard TWT concepts represented by this question. Broadcast scheduling can cover multiple stations, but that does not create a separate mechanism formally identified here as Multicast TWT. Therefore, the correct answers are A, B, and C.


NEW QUESTION # 19
If multiple Internet links are available, these links cannot be prioritized and can only be load-balanced.

Answer: A

Explanation:
The statement is false because Huawei SD-WAN supports both priority-based link selection and load balancing. Multiple Internet or WAN links do not have to be treated equally. An administrator can define a preferred or primary link and designate another link as secondary or backup according to application requirements, link quality, cost, bandwidth, or operational policy.
For delay- and packet-loss-sensitive services such as voice and video, a higher-quality link can be configured as the primary path and another link as the backup. If the primary link no longer satisfies the configured SLA thresholds, traffic can be dynamically switched to a better path. Huawei's material explicitly describes primary and secondary link selection based on SLA and also presents load-balancing-based steering as a separate option.
Load balancing is useful when an enterprise wants to utilize the bandwidth of multiple links concurrently.
Priority-based active/standby forwarding is preferable when one provider offers better quality or when one circuit should be reserved for critical services. Intelligent traffic steering can additionally consider application priority and current bandwidth utilization. Therefore, multiple links can be prioritized, load-balanced, or used in a policy-controlled combination, making option B correct.


NEW QUESTION # 20
......

Dumps4PDF is famous for our company made these exam questions with accountability. We understand you can have more chances getting higher salary or acceptance instead of preparing for the H19-404_V1.0 exam. Our H19-404_V1.0 practice materials are made by our responsible company which means you can gain many other benefits as well. We offer free demos of our H19-404_V1.0 Exam Questions for your reference, and send you the new updates of our H19-404_V1.0 study guide if our experts make them freely. All we do and the promises made are in your perspective.

Valid H19-404_V1.0 Exam Experience: https://www.dumps4pdf.com/H19-404_V1.0-valid-braindumps.html