The price for SD-WAN-Engineer training materials is reasonable, and no matter you are a student at school or an employee in the company, you can afford it. In addition, SD-WAN-Engineer exam materials cover most of knowledge points for the exam, and you can pass the exam as well as improve your professional ability in the process of learning. SD-WAN-Engineer Exam Materials are high-quality, and you can improve your efficiency. We have online and offline chat service. If you have any questions about SD-WAN-Engineer exam materials, you can contact us, and we will give you reply as soon as possible.
| Section | Objectives |
|---|---|
| Monitoring and Troubleshooting | - Troubleshooting Methodology - Dashboard and Analytics - Logs and System Health |
| Prisma SD-WAN Architecture and Components | - Controllers and ION Devices - Data Center and Branch Architecture - Prisma SD-WAN Solution Overview |
| Policy Configuration | - Application and Traffic Policy - QoS and Traffic Engineering - Security Policy Integration |
| Configuration and Deployment | - Network Segmentation (VLANs, Zones) - WAN Interface Configuration - Initial Setup and Provisioning |
>> Valid SD-WAN-Engineer Test Voucher <<
We provide Palo Alto Networks SD-WAN-Engineer web-based self-assessment practice software that will help you to prepare for the Palo Alto Networks Palo Alto Networks SD-WAN Engineer exam. Palo Alto Networks SD-WAN-Engineer Web-based software offers computer-based assessment solutions to help you automate the entire Palo Alto Networks SD-WAN Engineer exam testing procedure. The stylish and user-friendly interface works with all browsers, including Mozilla Firefox, Google Chrome, Opera, Safari, and Internet Explorer. It will make your Palo Alto Networks SD-WAN-Engineer Exam Preparation simple, quick, and smart. So, rest certain that you will discover all you need to study for and pass the Palo Alto Networks SD-WAN-Engineer exam on the first try.
NEW QUESTION # 18
In a data center (DC) with two ION devices, all of the remote branch Prisma SD-WAN VPNs are active only on DC ION-1.
Why are no VPNs active on DC ION-2?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
In a Prisma SD-WAN Data Center deployment, the operational state of the Secure Fabric VPNs (overlay tunnels) is directly tied to the health of the BGP Core Peer configuration.4 Core Peer Dependency: DC ION devices typically peer with the data center core switch (Core Router) via BGP to learn the subnets (prefixes) for the applications hosted in the DC. The Prisma SD-WAN controller monitors this BGP peering status.5 Controller Logic: If the BGP Core Peer on a DC ION goes down (or is not established), the controller automatically marks the VPN tunnels terminating at that specific ION as "Inactive".6 This is a fail-safe mechanism designed to prevent remote branches from sending traffic to a DC ION that has lost conne7ctivity to the internal data center network (and thus the applications).
Scenario Analysis: In this scenario, DC ION-1 has active VPNs, meaning its BGP Core Peer is UP and it is successfully advertising reachability. DC ION-2 has no active VPNs, which strongly indicates that its BGP Core Peer is down.8 Because the controller sees the peer is down, it suppresses the tunnel establishment or marks existing tunnels as inactive to ensure traffic is only directed to the healthy node (ION-1).
NEW QUESTION # 19
There are periodic complaints about the poor performance of a real-time application.
What can be inferred about the performance issue, based on the Network Transfer Time (NTT) and Server Response Time (SRT) image below?
Answer: B
Explanation:
In Prisma SD-WAN, application performance is monitored through distinct metrics that separate network health from application health. The provided graph displays Network Transfer Time (NTT) in blue and Server Response Time (SRT) in orange. NTT measures the round-trip time of packets traversing the WAN fabric, while SRT measures the time elapsed from when the server receives a request to when it sends the first response packet.
Analysis of the telemetry data shows that the NTT (blue line) remains consistently low and stable, generally staying below 100 milliseconds throughout the capture period. This indicates that the SD-WAN path and underlying network circuits are not the source of the latency. Conversely, the SRT (orange line) exhibits significant and erratic spikes, reaching as high as 450 to 475 milliseconds. These spikes occur while the network latency (NTT) remains flat.
Because the latency increases are isolated to the SRT metric, the root cause is confirmed to be on the Application Server side. This pattern typically suggests that the server is struggling with resource exhaustion, high CPU utilization, or database query delays during peak processing times. For a real-time application, these SRT spikes translate directly to jitter and "lag" for the end-user. By distinguishing between these two metrics, Prisma SD-WAN allows network administrators to prove that the network is performing within SLA and shift the troubleshooting focus to the application or server management teams, significantly reducing mean time to innocence (MTTI).
NEW QUESTION # 20
What are two potential causes when a secondary public circuit has been added to the branch site, but the Prisma SD-WAN tunnel is not forming to the data center? (Choose two.)
Answer: B,D
Explanation:
In a Prisma SD-WAN deployment, the formation of VPN tunnels between a branch ION device and a Data Center (DC) ION is governed by specific configuration parameters that define how an interface interacts with the WAN fabric. When a secondary public circuit is introduced, the system requires precise classification to initiate the negotiation of security associations.
The first critical factor is the Interface Role. For an ION device to attempt to build a global fabric tunnel over a public circuit, the interface must be explicitly assigned the "Internet" role. If the role is incorrectly set (e.g., as "LAN" or left unconfigured), the device will not treat that physical port as a viable path for the SD- WAN overlay, preventing the tunnel from initiating.
Secondly, the Circuit Label plays a vital role in the path selection and tunnel orchestration logic. Prisma SD- WAN uses labels to match local branch circuits with corresponding circuits at the data center or other branches. If a circuit label is missing or mismatched on the interface configuration, the Controller cannot properly orchestrate the "bind" between the branch and the hub. Without a valid label, the ION device doesn't know which path group the circuit belongs to, and consequently, the automated tunnel signaling process fails to complete.
While DNS is important for management connectivity to the Controller, it is generally not the primary blocker for site-to-site tunnel formation if the Controller reachability is already established via the primary circuit.
Similarly, "Interface Scope" is more relevant to routing advertisement rather than the foundational establishment of the SD-WAN tunnel itself. Therefore, ensuring the Internet role and Circuit Label are correctly applied is the standard troubleshooting step for non-forming tunnels on new circuits.
NEW QUESTION # 21
Which statement is valid when integrating Prisma SD-WAN with Prisma Access remote networks?
Answer: B
Explanation:
Comprehensive and Detailed Explanation
When deploying Prisma Access for Remote Networks (connecting branch offices), the licensing and throughput model is based on aggregate bandwidth allocated to specific compute locations (regions).
Bandwidth Allocation (Option D): Administrators must purchase and allocate a specific amount of bandwidth (e.g., 500 Mbps, 1 Gbps) to a Prisma Access "Compute Location" (e.g., US West, Europe Central). This allocated bandwidth is then shared as a pool among all the branch sites (Remote Networks) that onboard and terminate their IPSec tunnels at that specific location. The system does not allocate bandwidth on a strict per-site basis but rather enforces the limit on the aggregate throughput of the compute node itself.
Policy Enforcement (Option A): Security policies for Prisma Access are enforced in the cloud (at the Prisma Access Service Processing Node), not pushed down to the branch ION devices for local enforcement. The ION device handles local segmentation (ZBFW) and traffic steering, but the "Remote Network" security stack resides in the cloud.
Path Usage (Option C): Prisma SD-WAN is designed to utilize Active/Active paths. When a branch has multiple internet circuits connected to Prisma Access, the CloudBlade and ION automatically build tunnels on all compatible paths and can load-balance traffic across them based on application performance (SLA), rather than defaulting to a strict Active/Standby model for internet traffic.
NEW QUESTION # 22
An administrator has configured a Path Policy for "ERP_Traffic". The policy allows two public internet links, "ISP-A" and "ISP-B", both marked as "Active". The Path Quality Profile (SLA) requires a latency of less than 150ms. Currently, both ISP-A and ISP-B have a latency of 40ms, well within the SLA.
How does the Prisma SD-WAN ION determine which link to use for a new flow of "ERP_Traffic" when both active paths meet the SLA requirements?
Answer: D
Explanation:
Comprehensive and Detailed Explanation
Prisma SD-WAN utilizes a sophisticated decision engine for Application-Based Path Selection that goes beyond simple failover. When configuring a Path Policy, the administrator defines "Active" paths and a "Path Quality Profile" (SLA).
SLA Compliance (The Filter): First, the system filters the available paths based on the Path Quality Profile. In this scenario, both ISP-A and ISP-B have 40ms latency against a 150ms threshold. Both are "green" or compliant paths.
Selection Criteria (The Tie-Breaker): When multiple paths are configured as "Active" and all meet the performance SLA, the ION device aims to optimize the overall user experience and network utilization. The default behavior for load balancing across healthy, compliant active paths is to select the path with the highest available bandwidth capacity.
By steering new flows to the link with the most "headroom" (available Mbps), the system prevents the saturation of a smaller link (e.g., a 20Mbps DSL line) while a larger link (e.g., 1Gbps Fiber) sits underutilized. This maximizes the aggregate throughput for the site. While latency is the qualifier, bandwidth availability is often the selector for compliant paths. Note that if the application was defined as "Real-Time" and configured for packet duplication, behavior would differ, but for standard traffic, capacity-based distribution is the standard active/active logic.
NEW QUESTION # 23
......
As we all know, respect and power is gained through knowledge or skill. The society will never welcome lazy people. Do not satisfy what you have owned. Challenge some fresh and meaningful things, and when you complete SD-WAN-Engineer Exam, you will find you have reached a broader place where you have never reach. Your life will become more meaningful because of your new change, and our SD-WAN-Engineer question torrents will be your first step.
SD-WAN-Engineer Test Registration: https://www.validdumps.top/SD-WAN-Engineer-exam-torrent.html