BONUS!!! Download part of Exam4Tests VNX301 dumps for free: https://drive.google.com/open?id=1YUKKecAJDZ9Sa96b_5i0mxmAf1KP7Erm
Are you planning to appear in the Versa Certified SD-WAN Specialist (VNX300) (VNX301) certification test and need to know where to get updated practice questions? Then you are at the right place because Versa Certified SD-WAN Specialist (VNX300) (VNX301) has made the learning material for the applicants to prepare successfully for the certfication exam in a short time.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Life is beset with all different obstacles that are not easily overcome. For instance, VNX301 exams may be insurmountable barriers for the majority of population. However, with the help of our exam test, exams are no longer problems for you. The reason why our VNX301 Training Materials outweigh other study prep can be attributed to three aspects, namely free renewal in one year, immediate download after payment and simulation for the software version.
NEW QUESTION # 41
You have deployed a group of devices in Versa Director, and the field technicians have performed the onboarding tasks onsite. One of the devices has not finished the onboarding process and does not appear in the Appliances list in Versa Director. The onboarding VPN tunnel from the device to the Controller is up.
Which two actions would help you solve this problem? (Choose two.)
Answer: C,D
Explanation:
The correct answers are A and C . If the onboarding VPN tunnel from the branch device to the Controller is up, the branch has reached at least the initial staging/control connectivity stage. Versa troubleshooting documentation explains that after a branch establishes IPsec connectivity to the Controller, the Controller sends a branch-connect notification to Versa Director. In response, Director pushes staging configuration and continues the onboarding lifecycle. If the expected later notification is not seen, the branch has not completed staging and further onboarding/debug steps are required.
The Tasks list in Versa Director is useful because device deployment and onboarding actions are executed as Director tasks. If template commit, workflow deployment, device claiming, or configuration push fails, the task output can show the error. The Unknown Devices dashboard is also relevant because a device that reaches the Controller but cannot be matched or fully associated with an expected workflow/appliance record may appear as an unknown device awaiting administrative review. The Monitor dashboard is not the best choice because the device is missing from the Appliances list and has not completed onboarding. Resource Pool is related to connector resources, not branch onboarding completion.
NEW QUESTION # 42
You are configuring a CGNAT rule for branch internet access and want to verify which access-list entry will match traffic before translation. Which information is shown by the CGNAT ACL command?
Answer: C
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation shows the command show cgnat acl info < tenant-id > for viewing CGNAT access lists used for traffic matching. The example output includes columns such as ACL handle , RuleId , Category , Precedence , VRF , Source IP , and Destination IP . It also shows tenant ID and total filters.
This command is useful when a CGNAT rule exists in configuration but sessions are not being translated. By checking the ACL output, the administrator can confirm whether the correct source prefix, destination prefix, VRF, and rule precedence are actually programmed in the dataplane. If the wrong VRF or subnet is shown, the rule may never match the intended traffic.
System uptime and CPU usage are operational health indicators. SLA metrics are SD-WAN path- quality values. BGP AS path and local preference are routing attributes. None of these directly show CGNAT access-list match programming.
NEW QUESTION # 43
Examine the exhibit below.
You are configuring an IPsec tunnel towards a non-SD-WAN site over the INETTransport-VR. The site IP address is 10.1.1.1. This tunnel is for traffic between the 192.168.100.0/24 and the 192.168.200.0/24 LAN networks. The tunnel does not establish.
Referring to the exhibit, which statement is correct?
Answer: B
Explanation:
The correct answer is A . The exhibit shows that the IPsec VPN is being configured with Tunnel Routing Instance: XIAN-Control-VR . However, the question states that the tunnel is toward a non-SD-WAN site over the INET-Transport-VR . For a site-to-site IPsec tunnel, the tunnel routing instance must match the routing instance used to reach the peer public IP address. In this case, the remote non-SD-WAN peer is
10.1.1.1 , and the intended underlay transport is INET-Transport-VR , not the Control VR.
Versa troubleshooting documentation explains that routing instances are used to define where traffic is sourced and forwarded. For example, configuration examples select routing instances when enabling services or initiating tests, and traffic must use the correct WAN or transport routing instance to reach the remote endpoint. Versa branch troubleshooting also emphasizes that after transport connectivity is available, the branch establishes IKE-based IPsec connectivity; if that connectivity fails, the IPsec-related interface remains down.
Changing the routing instance to global would not be correct because the intended path is specifically INET-Transport-VR. A higher precedence value is not required to establish the tunnel. The policy selector shown already defines local-to-remote interesting traffic, and the key failure is the incorrect tunnel routing instance.
NEW QUESTION # 44
A tenant uses CGNAT for internet breakout. You want to verify whether CGNAT rules, pools, static NAT entries, subscribers, and endpoint-independent mapping entries are programmed in the vsmd daemon for a tenant. Which command should you use after connecting to vsmd?
Answer: D
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation provides commands to inspect CGNAT state inside the vsmd daemon. To view summary information about configured tenants, the document instructs administrators to issue show cgnat tenants . The sample output shows each tenant ID and counters such as the number of configured rules, pools, DS-Lite service chains, 6RD service chains, static NAT entries, subscribers, endpoint-independent mapping entries, endpoint-independent filtering entries, and softwires.
This command is especially useful when CGNAT configuration appears correct in Director but translation is not happening, because it confirms whether the runtime dataplane process actually has the tenant CGNAT state.
show interfaces brief shows interface status and IP addressing. show alarms shows event notifications, and show system uptime shows how long the system has been running. These are useful operational commands but do not show CGNAT tenant programming inside vsmd.
NEW QUESTION # 45
You want to ensure that devices in your branch sites cannot source traffic from IP addresses that are not assigned to the branch sites. What will solve this problem?
Answer: C
Explanation:
The correct answer is B . The requirement is to stop branch devices from sourcing traffic using IP addresses that do not belong to the branch. This is a source-address enforcement problem, so the correct control is a stateful firewall policy that permits only traffic whose source IP address matches the valid branch LAN prefix or branch-assigned address range. Versa's stateful firewall configuration documentation explains that firewall policy rules include source matching, where the administrator selects the source zone and one or more source addresses to which the rule applies.
By creating an allow rule for the legitimate branch source prefixes and placing a deny rule for all other sources from the branch LAN zone, the VOS device prevents spoofed or unauthorized source addresses from leaving the branch. This is consistent with Versa security policy behavior, where firewall rules evaluate traffic based on zones, addresses, services, applications, and other match criteria. Captive portal verifies user identity but does not directly prevent IP spoofing. An IP filter profile based on applications does not ensure the source address belongs to the branch. Option D is incorrect because allowing traffic to the assigned LAN range controls destination traffic, while this requirement is about validating the source IP address of outbound branch traffic.
NEW QUESTION # 46
......
We provide free update to the client and the discounts to the old client. We provide free update of our VNX301 exam materials within one year and after one year the client can enjoy the 50% discounts. The old clients enjoy some certain discounts when they buy our VNX301 exam torrent. Our experts check whether there is the update of the test bank every day and if there is the system will send to the client automatically. We choose the most typical questions and answers which seize the focus and important information and the questions and answers are based on the real exam. So you can master the most important VNX301 Exam Torrent in the shortest time and finally pass the exam successfully.
VNX301 Valid Test Sample: https://www.exam4tests.com/VNX301-valid-braindumps.html
2026 Latest Exam4Tests VNX301 PDF Dumps and VNX301 Exam Engine Free Share: https://drive.google.com/open?id=1YUKKecAJDZ9Sa96b_5i0mxmAf1KP7Erm