Valid 300-425 Dumps Demo - 300-425 Reliable Test Answers

DOWNLOAD the newest Itbraindumps 300-425 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1VJCiVNxZNu-IcPUi7Y0YQEzeUp11jgFo

If you have problems with your installation or use on our 300-425 training guide, our 24 - hour online customer service will resolve your trouble in a timely manner. We dare say that our 300-425 preparation quiz have enough sincerity to our customers. You can free download the demos of our 300-425 Exam Questions which present the quality and the validity of the study materials and check which version to buy as well.

Cisco 300-425 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Mobility	25%	- Validate mobility tunneling 1. Data path 2. Control path - Optimize client roaming - Design mobility groups based on roles
Topic 2: Wireless Site Survey	25%	- Utilize planning and analysis tools 1. Ekahau 2. Spectrum Analyzer 3. Prime Infrastructure 4. Chanalyzer 5. AirMagnet - Perform post-deployment site survey - Perform pre-deployment site survey - Perform and analyze Layer 1 site survey - Collect design requirements and evaluate constraints 1. Real-time applications 2. Security 3. Deployment type 4. Client density 5. Access point type - Perform predictive site survey - Describe material attenuation and wireless impact
Topic 3: WLAN High Availability	20%	- Design high availability for access points 1. Fallback configuration 2. Access point prioritization - Design high availability for controllers 1. Link Aggregation Group 2. Stateful Switchover 3. Anchor controller redundancy
Topic 4: Wired and Wireless Infrastructure	30%	- Design high-density wireless networks 1. Lecture halls 2. Campus 3. Conference rooms - Design wireless bridging 1. Ethernet bridging 2. Workgroup bridge and roaming 3. Modes of operation - Design radio management 1. RxSOP 2. RRM 3. RF profiles - Determine logical infrastructure requirements 1. WLC licensing 2. Wireless architecture selection - Determine physical infrastructure requirements 1. Cabling 2. Access point power 3. Switch port capacity 4. Mounting 5. Grounding - Apply wireless network design requirements 1. Voice and video 2. Hyperlocation 3. Data 4. Location services

>> Valid 300-425 Dumps Demo <<

Valid 300-425 Dumps Demo | Cisco 300-425 Reliable Test Answers: Designing Cisco Enterprise Wireless Networks Pass Success

Itbraindumps Designing Cisco Enterprise Wireless Networks (300-425) practice test software is another great way to reduce your stress level when preparing for the Cisco Exam Questions. With our software, you can practice your excellence and improve your competence on the Cisco 300-425 Exam Dumps. Each Cisco 300-425 practice exam, composed of numerous skills, can be measured by the same model used by real examiners.

Cisco Designing Cisco Enterprise Wireless Networks Sample Questions (Q113-Q118):

NEW QUESTION # 113
Which metric best indicates client experience in a WLAN design?

A. Data rate
B. SNR
C. RSSI
D. Round-trip latency

Answer: B

NEW QUESTION # 114
A wireless engineer is designing a wireless network to support real time applications over wireless. Which IEEE protocol must the engineer enable on the WLC so that neighbor list radio management packets are sent to the wireless devices?

A. 802.11r
B. 802.11i
C. 802.11w
D. 802.11k

Answer: D

NEW QUESTION # 115
An engineer must create data link redundancy for the company's Cisco Wireless LAN controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)

A. Packets are always sent out on the same port they are received on.
B. All interface traffic passes as long as one port is up.
C. The same port has multiple untagged dynamic interfaces.
D. Ports are grouped into multiple LAGs.
E. Full bandwidth of all links is available.
F. Interface connection to two separate nonstacked switches is available.

Answer: B,E,F

Explanation:
The decision to configure LAG-based redundancy is influenced by the following features:
B . All interface traffic passes as long as one port is up: This ensures that the wireless LAN controller can continue to operate and manage traffic as long as at least one port in the LAG is functioning, providing a robust failover solution1.
D . Interface connection to two separate nonstacked switches is available: LAG allows for connections to multiple switches, which can provide redundancy and higher availability compared to single switch connections1.
E . Full bandwidth of all links is available: With LAG, the combined bandwidth of all active ports is available, enhancing the throughput capabilities of the wireless LAN controller1.

NEW QUESTION # 116
A wireless engineer is getting ready to perform a predictive site survey. The new network needs to support data and voice over wireless. Which two Cisco recommendations should be considered for the design? (Choose two.)

A. Use the 5 GHz radio band due to the 24 non-overlapping channels.
B. Use the 5 GHz radio band due to 40 MHz bandwidth capability.
C. Set the cell overlap to 15%
D. Set -19 dBm of separation between APs on the same channel.
E. Set the cell boundary to -67 dBm.

Answer: B,E

Explanation:
The 5 GHz band is recommended for voice over wireless due to its wider channel bandwidths, allowing for higher data rates. Setting the cell boundary at -67 dBm ensures sufficient signal strength for reliable voice communication. Reference: CCNP Enterprise Wireless Design ENWLSD 300-425 Official Cert Guide.

NEW QUESTION # 117
A customer called with a requirement that internal clients must be on different subnets depending on the building they are in. All access points are operating in local mode and will not be modified, and this is a single controller solution. Which design approach creates the desired result?

A. Create FlexConnect groups, place the access points in, and set the correct VLAN to SSID mapping based on location.
B. Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access points for that location.
C. Create mobility anchors for the SSID and on the controller under the internal SSID create a foreign map to the desired VLAN based on location.
D. Create an SSID place it to the desired VLAN under WLANs and configure 802.1x in ISE to assign the correct VLAN based on the SSID from which the client is authenticating

Answer: B

Explanation:
Creating AP groups for each location allows for the mapping of specific VLANs to an internal SSID tailored for that area. This approach enables clients to be on different subnets based on their building location within a single controller environment.
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/71477-ap-group-vlans-wlc.html

NEW QUESTION # 118
......

In today's society, our pressure grows as the industry recovers and competition for the best talents increases. By this way the 300-425 exam is playing an increasingly important role to assess candidates. Considered many of our customers are too busy to study, the 300-425 real study dumps designed by our company were according to the real exam content, which would help you cope with the 300-425 Exam with great ease. The masses have sharp eyes, with so many rave reviews and hot sale our customers can clearly see that how excellent our 300-425 exam questions are. After carefully calculating about the costs and benefits, our 300-425 prep guide would be the reliable choice for you, for an ascending life.

300-425 Reliable Test Answers: https://www.itbraindumps.com/300-425_exam.html

DOWNLOAD the newest Itbraindumps 300-425 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1VJCiVNxZNu-IcPUi7Y0YQEzeUp11jgFo