H12-831_V1.0 Prüfungsfragen, H12-831_V1.0 Fragen und Antworten, HCIP-Datacom-Advanced Routing & Switching Technology V1.0

Seit der Gründung der PrüfungFrage wird unser System immer verbessert ---- Immer reichlicher Test-Bank, gesicherter Zahlungsgarantie und besserer Kundendienst. Heute sind die Huawei H12-831_V1.0 Prüfungsunterlagen schon von zahlreichen Kunden anerkennt worden. Nach Ihrem Kauf hört unser Kundendienst nicht aus. Wir werden Ihnen die Informationen über die Aktualisierungssituation der Huawei H12-831_V1.0 rechtzeitig. Wir sind auch verantwortlich für Ihre Verlust. Falls Sie nicht wunschgemäß die Huawei H12-831_V1.0 Prüfung bestehen, geben wir alle Ihre für Huawei H12-831_V1.0 bezahlte Gebühren zurück.

Huawei H12-831_V1.0 Exam Syllabus Topics:

SectionWeightObjectives
Network Troubleshooting10%- Structured troubleshooting methodology
- Performance and service fault resolution
- Switching and link fault handling
- Routing protocol fault diagnosis
Advanced IGP Features17%- IS-IS advanced features
  • 1. Route aggregation
    • 2. Convergence optimization
      • 3. Level-1/Level-2 routing control
        - OSPF advanced features
        • 1. Fast convergence technologies
          • 2. Route summarization and filtering
            • 3. Special area types and applications
              Network O&M7%- Routine maintenance procedures
              - Network monitoring and performance analysis
              - Configuration management and backup
              - Log and alarm management
              Advanced BGP Features10%- BGP multi-homing and load balancing
              - Route reflectors and confederations
              - BGP route selection and attributes
              - Routing policies and filtering
              Network Cutover7%- Cutover planning and risk assessment
              - Pre-cutover verification
              - Post-cutover validation
              - Implementation and rollback strategy
              Advanced Ethernet Technologies10%- Ethernet link aggregation and reliability
              - QinQ and VLAN mapping
              - VLAN aggregation and MUX VLAN
              - Port isolation and security features
              IPv6 Routing20%- Transition mechanisms (dual-stack, tunnel, translation)
              - OSPFv3 and IS-IS for IPv6
              - BGP4+ for IPv6
              - IPv6 address planning and configuration
              MPLS Technologies19%- MPLS fundamentals and label distribution
              - MPLS VPN (L3VPN, L2VPN)
              - LDP and RSVP-TE protocols
              - MPLS OAM and protection

              >> H12-831_V1.0 Unterlage <<

              Wir machen H12-831_V1.0 leichter zu bestehen!

              Die Fragen und Antworten zur Huawei H12-831_V1.0 Zertifizierungsprüfung von PrüfungFrage sind den echten Prüfung sehr ähnlich. Wenn Sie die Prüfungsfragen und Antworten von PrüfungFrage wählen, bieten wir Ihnen einen einjährigen kostenlosen Update-Service. Wir versprechen, dass Sie die Huawei H12-831_V1.0 Prüfung 100% bestehen können. Sonst erstatteten wir Ihnen die gesammte Summe zurück.

              Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 H12-831_V1.0 Prüfungsfragen mit Lösungen (Q218-Q223):

              218. Frage
              On the OSPF network shown in the figure, area 1 is a totally NSSA, area 2 is a common area, and R4 imports an external route 10.0.4.4/32. The router ID of each router is 10.0.X.X, where X is the number of the router.
              The asbr-summary 10.0.4.0 255.255.255.0 command is configured in the OSPF processes of R1 and R3.
              Which of the following statements is true?

              Antwort: A

              Begründung:
              R4 is an ASBR inside Area 1, which is configured as a totally NSSA. When R4 imports 10.0.4.4/32, it originates a Type 7 NSSA LSA within Area 1. Therefore, option A is incorrect: a totally NSSA can contain Type 7 LSAs for external routes imported locally.
              Type 7 LSAs have area-local flooding scope. R1 and R3, acting as NSSA ABRs, do not flood the original Type 7 LSA into Area 0 or Area 2. Instead, the selected translator converts the external information into a Type 5 LSA. The configured asbr-summary 10.0.4.0 255.255.255.0 command causes the translated external information to be advertised as the summarized 10.0.4.0/24 Type 5 LSA.
              Area 2 is a common area and therefore cannot contain Type 7 LSAs. Option C is incorrect because Area 0 receives the translated Type 5 external LSA. Option D is not a valid conclusion because common and backbone areas support Type 4 LSAs, and asbr-summary does not suppress that LSA type. Huawei's LSA support table explicitly identifies Type 7 as supported only in NSSA and totally NSSA areas. Huawei OSPF documentation


              219. Frage
              A network engineer outputs the following information when troubleshooting OSPF. Based on this, determine which reason causes the adjacency relationship to fail to be established normally?

              Antwort: C


              220. Frage
              The linkage between OSPF and BFD is to associate BFD and OSPF protocols to speed up the response of OSPF protocol to network topology changes. After BFD status 3 is UP, the OSPF neighbor status can reach the Full status. After the BFD status changes to Down, the OSPF neighbor status can change to Down.

              Antwort: A


              221. Frage
              In the network shown in the figure, R1, R2, R4, and R5 run IS-IS, and the area number is
              49.0001. R3 and R6 run IS-IS, and the area number is 49.0002. Within AS 65000, R1, R3, R4, and R6 all establish IBGP neighbor relationships with R2 and R5, where R2 and R5 are RRs and R1, R4, R3, and R6 are clients. R2 and R5 also establish an IBGP neighbor relationship and configure the same Cluster ID. IBGP neighbor relationships are all established using the Loopback0 interface. The IP address of the Loopback0 interface of each device is 10.0.X.X/32, and the Router ID is 10.0.X.X, where X is the device number. R1 and R4 introduce the external network 192.168.1.0/24 into BGP through import. For 192.168.1.0/24, match based on the number of valid routes in the BGP routing table.

              Antwort:

              Begründung:


              222. Frage
              The Router ID of R4 is 10.0.4.4. In the LSDB of R4, the LSA shown in the figure is seen. The network engineer makes the following inferences based on the LSA. Which one is wrong?

              Antwort: B


              223. Frage
              ......

              Heutzutage, wo Zeit in dieser Gesellschaft sehr geschätzt wird, schlage ich Ihnen vor, die effezienten Huawei H12-831_V1.0 (HCIP-Datacom-Advanced Routing & Switching Technology V1.0) Fragenkataloge von PrüfungFrage zu wählen. Sie können mit weniger Zeit und Geld die Huawei H12-831_V1.0 Zertifizierungsprüfung nur einmalig bestehen können.

              H12-831_V1.0 Musterprüfungsfragen: https://www.pruefungfrage.de/H12-831_V1.0-dumps-deutsch.html