All kinds of exams are changing with dynamic society because the requirements are changing all the time. To keep up with the newest regulations of the VNX301 exam, our experts keep their eyes focusing on it. Our VNX301 exam torrent are updating according to the precise of the real exam. Our VNX301 Test Prep to help you to conquer all difficulties you may encounter. Once you choose our VNX301 quiz torrent, we will send the new updates for one year long, which is new enough to deal with the exam for you and guide you through difficulties in your exam preparation.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
>> New VNX301 Exam Question <<
All questions in our Versa Networks VNX301 pass guide are at here to help you prepare for the certification exam. We have developed our learning materials with accurate Versa Networks VNX301 exam answers and detailed explanations to ensure you pass test in your first try. Our PDF files are printable that you can share your Versa Networks VNX301 free demo with your friends and classmates.
NEW QUESTION # 26
You are onboarding a branch with one WAN and one LAN interface. After a successful branch activation, the branch is not able to reach the Versa Controller. You realize that the WAN gateway IP address originally entered under the Device Bind Data menu in Versa Director is incorrect. Which action will you perform to solve the problem?
Answer: C
Explanation:
The correct action is to update the WAN gateway IP address in Device Bind Data and onboard the branch appliance again. Device Bind Data supplies site-specific values, such as WAN interface addressing and gateway information, that are merged with the workflow and template configuration during onboarding. If the wrong WAN gateway is entered, the branch may activate successfully from a workflow perspective, but the resulting WAN routing configuration is incorrect. As a result, the branch cannot establish proper transport reachability to the Controller. Versa troubleshooting documentation explains that, after establishing transport connectivity from a branch to a Controller, at least one WAN interface must be available, and the branch then establishes IKE-based IPsec connectivity to the Controller. If that IKE/IPsec connectivity fails, the Controller- facing ptvi interface remains down.
Changing the configuration only from the Appliance context is not the best answer because the incorrect value originated in the bind-data source used for provisioning. Modifying it manually from the branch CLI is also not recommended because the device is managed by Versa Director and template-driven configuration. Resetting the device does not automatically discover or "ping" the correct gateway. The correct remediation is to fix the bind data and repeat onboarding so the branch receives the correct generated configuration.
NEW QUESTION # 27
Examine the exhibit below.
You are onboarding the SOLDEU-R2 branch device using the staging script. You cannot get a Versa- Provider-Controller-VR IP address assigned, indicating that the IPsec tunnel to the corrector has not come up.
You verified that the cables have been connected to the correct ports.
What has caused this issue?
Answer: B
Explanation:
The issue is caused by specifying the incorrect WAN port in the staging script. In the exhibit, the SOLDEU- R2 branch is physically connected to the Internet cloud through vni-0/0 , while vni-0/1 is shown as the inter- device link toward SOLDEU-R1. However, the show interfaces brief output shows that the WAN IP address
192.168.122.121/24 has been assigned to vni-0/1.0 , not to the Internet-facing interface. Since the cables are confirmed to be connected correctly, the mismatch must be in the staging script interface selection, not in the cabling.
Versa documentation states that during SD-WAN staging, the branch establishes an IKE session with the Controller, and after that the Controller assigns an IP address to the branch device. Versa troubleshooting guidance also states that after transport connectivity to the Controller is established, the branch forms IKE-based IPsec connectivity, and if this succeeds, the ptvi interface toward the Controller comes up. If IKE/IPsec fails, the ptvi interface remains down. Because the staged WAN IP is placed on the wrong VNI interface, the branch cannot reach the Controller over the intended Internet transport, so the Controller tunnel does not come up.
NEW QUESTION # 28
Examine the exhibit below.
According to the CGNAT pool configuration shown in the exhibit, which two statements are true? (Choose two.)
Answer: A,B
Explanation:
The exhibit shows the Add CGNAT Pool configuration with the IP Address/Range option selected. The configured address range is named Visitors , with a low address of 192.168.10.100 and a high address of
192.168.10.150 . In CGNAT, this pool defines the translated source address resource used by matching NAT rules; it does not define the original inside source hosts. Therefore, matching sessions will have their source address translated to an address from this configured pool range, which makes option C correct. Versa's CGNAT configuration examples show that a rule matches original source and destination prefixes, and then attaches a translated source pool to perform NAT.
NEW QUESTION # 29
A branch user reports poor throughput over an SD-WAN tunnel. The command show interfaces detail vni-0/0 shows the interface is operating at half-duplex / 100 Mbps , although the circuit is expected to run at 1 Gbps full duplex. What is the most likely cause?
Answer: D
NEW QUESTION # 30
In an HA active-active deployment, one device has two WAN networks, INET-1 and MPLS-1 , and its peer also has two WAN networks, INET-2 and MPLS-2 . In this scenario, how many subinterfaces will be created on the cross-connect link between the devices by an HA active-active workflow?
Answer: C
Explanation:
The correct answer is D . In a Versa HA active-active branch deployment, the cross-connect link between the two CPE devices is used to extend WAN transport reachability between the peers. Versa SD-WAN design documentation explains that, in an HA active-active design, a cross-connect cable between the two devices extends one device's transport VR to the other device and vice versa. For example, the documentation describes the cross-connect as extending the MPLS-Transport-VR to one device and the Internet- Transport-VR to the peer device.
In the question, there are four total WAN networks across the HA pair: INET-1 , MPLS-1 , INET-2 , and MPLS-2 . The HA active-active workflow must create separate logical subinterfaces on the cross-connect link for each WAN network so that each transport segment can be extended and kept logically separated across the two appliances. Therefore, the number of subinterfaces created on the cross-connect link equals the total number of WAN networks across the HA pair, which is four .
Options A, B, and C are incorrect because they undercount the number of required transport extensions. Two subinterfaces would only account for two WAN networks, but this design has four separate WAN transport networks.
NEW QUESTION # 31
......
Do you need the VNX301 certification? You may still hesitate. In fact, VNX301 certification has proved its important effect in many aspects of your life. VNX301 certification will definitely keep you competitive in your current position and considered jewels on your resume. The person who get certified by VNX301 certification will be proved to be dedicated, committed and have a strong knowledge base. If you are considering becoming a certified professional about Versa Networks test, now is the time. Versa Networks VNX301 Exam Practice torrent is the best valid study material for the preparation of VNX301 actual test. With the good VNX301 latest study pdf, you can get your certification at your first try.
Reliable VNX301 Test Notes: https://www.getcertkey.com/VNX301_braindumps.html