There are a lot of materials for Cisco 300-110 practice test. VCETorrent is the only site providing with the finest Cisco 300-110 dumps torrent. All VCETorrent test questions are the latest and we guarantee you can pass your exam at first time. 300-110 Questions and answers VCETorrent provide are rewritten by the modern information technology experts, which is good for you.
| Section | Weight | Objectives |
|---|---|---|
| Mobility Design | 25% | - Guest mobility and BYOD design - Mobility architecture models
|
| Wireless Infrastructure Design | 30% | - Wireless Controller architecture and deployment
|
| WLAN High Availability and Security Design | 20% | - Management and monitoring design - High availability design
|
| Wireless Site Survey | 25% | - Layer 1 site survey execution and analysis - Pre-deployment survey and validation - RF propagation and attenuation analysis - Design requirements collection and constraint evaluation
|
The clients can use the shortest time to prepare the exam and the learning only costs 20-30 hours. The questions and answers of our 300-110 study materials are refined and have simplified the most important information so as to let the clients use little time to learn. The clients only need to spare 1-2 hours to learn our 300-110 Study Materials each day or learn them in the weekends. Commonly speaking, people like the in-service staff or the students are busy and donโt have enough time to prepare the exam. Learning our 300-110 study materials can help them save the time and focus their attentions on their major things.
NEW QUESTION # 93
A network engineer is designing a new wireless network for a campus. The network must include optimized performance, avoid interference, availability in high-density areas, and roaming. Which two approaches must be taken? (Choose two.)
Answer: D,E
Explanation:
The design requirements - optimized performance, interference avoidance, high-density support, and roaming capability - collectively point to a dual-band strategy using narrow channel widths. For 5 GHz operation (Option A), 20 MHz channels are the correct choice for high-density and campus-scale deployments. The 5 GHz band has a significantly greater number of non-overlapping channels compared to
2.4 GHz (up to 24 non-overlapping 20 MHz channels in UNII-1, UNII-2, and UNII-3), enabling a robust channel reuse plan with minimal co-channel interference. Wider 5 GHz channels (Options C and E - 80 MHz and 40 MHz) would consume multiple channel blocks, dramatically reducing the number of available non-overlapping channels and increasing co-channel interference in dense deployments. For 2.4 GHz operation (Option B), 20 MHz channels are mandatory - there are only three non-overlapping 20 MHz channels (1, 6, 11) in the 2.4 GHz band. Using 40 MHz channels in 2.4 GHz (Option D) eliminates all non- overlapping channel separation, causing massive co-channel interference and is universally contraindicated in enterprise designs. Reference: WLSD Study Guide - Channel Planning, High-Density Design, Frequency Band Selection.
NEW QUESTION # 94
A network engineer must design a new wireless solution for a company, but the budget can only stretch to include a single Cisco 9800-40 WLC. The company requires high availability between the WLC and the core switch in the event of a cable failure. The WLC must dynamically manage port redundancy and perform load balancing between APs transparently. Which design approach must the engineer take to meet the requirements?
Answer: C
Explanation:
Link Aggregation Group (LAG) is the correct design approach for a single Cisco 9800-40 WLC that requires high availability between the WLC and the core switch in the event of a cable failure. LAG combines multiple physical ports on the WLC into a single logical channel, providing both redundancy (traffic automatically redistributes across remaining links when one fails) and load balancing (traffic is distributed across all active links). Importantly, LAG operates transparently to AP management - APs see a single logical uplink regardless of which physical port their traffic traverses. With a single WLC, Multi-LAG (Option B) is not applicable - Multi-LAG is a feature of the Catalyst 9800 that allows multiple separate LAG bundles for different network connections, typically used with SSO pairs. LACP (Option C) is the protocol used to negotiate LAG member links - it is the mechanism within LAG, not an independent design approach. PAgP (Option D) is a Cisco proprietary alternative to LACP for port aggregation but the question asks for the design approach, which is LAG. Reference: WLSD Study Guide - Catalyst 9800 LAG Design, Port Redundancy and Load Balancing, Single-Controller High Availability.
NEW QUESTION # 95
During a site survey for a new wireless deployment in a multifloor office building, an engineer must identify sources of interference and ensure optimal AP placement for 5 GHz coverage. While walking the site with a spectrum analyzer, the engineer notices periodic spikes in the noise floor on several channels and inconsistent signal strengths reported by the survey tool, despite visually unobstructed paths. Which action must the engineer take next to accurately assess and mitigate the Layer 1 interference?
Answer: A
Explanation:
Layer 1 interference analysis is foundational to the Cisco site survey methodology. When a spectrum analyzer reveals periodic noise floor spikes across multiple channels with no clear line-of-sight obstruction, the root cause is almost certainly a non-802.11 device - candidates include cordless phones, video cameras, microwave equipment, or radar systems triggering DFS events. The correct engineering response is systematic documentation: capture the time of occurrence, the specific frequency or frequency range, and the geographic location of the interference signature. This triangulation data enables correlation with physical devices present in the facility. Simply increasing transmit power (Option A) raises the noise floor for neighboring cells and worsens co-channel interference. Using WLC monitoring tools (Option B) is insufficient because the WLC cannot detect non-802.11 energy at Layer 1. Adjusting the channel plan (Option C) without fully characterizing the interferer is premature. Only Option D follows the correct Cisco survey methodology for Layer 1 analysis, leading to actionable AP placement adjustments. Reference: WLSD Study Guide - Wireless Site Survey Methodology, Layer 1 Spectrum Analysis, Interference Identification and Mitigation.
NEW QUESTION # 96
A customer wants to provide wireless coverage in a parking lot outside of a building. An engineer determines that three APs are required. The APs can be mounted on the light poles in the parking lot because there are cable routes already in place for these locations. The closest wiring closet is approximately 200 meters away. Which setup powers and connects the APs back to the customer network?
Answer: C
Explanation:
This question hinges on a fundamental network engineering constraint: the maximum transmission distance of copper Ethernet cabling. IEEE 802.3 standards specify a maximum segment length of 100 meters for all standard PoE and Ethernet over Category 5e, 6, or 6A UTP copper cabling. The parking lot light poles are approximately 200 meters from the closest wiring closet -- more than double the maximum copper distance. This immediately eliminates Options A and D (Category 6 UTP): at 200 meters, UTP copper cannot reliably carry Ethernet at any supported speed. The correct solution is fiber optic connectivity between the wiring closet and the parking lot poles, combined with a local AC/DC power module at each pole location. Fiber optic cabling supports runs of hundreds of meters to kilometers -- easily spanning 200 meters. At the AP mounting location on the light pole, an AC/DC power module (powered from the pole's existing electrical supply) converts AC power to the DC power the AP requires. Option B (fiber with 802.3af) is incorrect because PoE cannot be delivered over fiber -- 802.3af requires copper cabling for simultaneous power and data delivery. The AC/DC power module at the remote end is the correct power solution when fiber is required.
NEW QUESTION # 97
A customer has two Cisco WLCs configured in a SSO cluster. The wireless network supports a large warehouse. The customer purchases new iPads to replace legacy scanners. Both devices connect to a single SSID named Scanning by using WPA2 Personal. The customer wants to use a standards-based method for fast roaming on the new iPads. Which approach meets the scanner requirement and still supports the legacy scanners?
Answer: A
Explanation:
The design challenge is enabling IEEE 802.11r Fast BSS Transition for the new iPads (the standards- based fast roaming method) while maintaining backward compatibility for legacy RF scanners that may not support 802.11r. The SSID uses WPA2 Personal (PSK), not 802.1X enterprise authentication -- therefore the correct Fast Transition variant is FT PSK (pre-shared key), not FT 802.1X (Options A and B). The critical configuration parameter is setting Fast Transition to Adaptive mode rather than mandatory. Adaptive mode is a Cisco feature that allows the AP and SSID to support both 802.11r- capable clients (which will use FT PSK for fast roaming) and non-802.11r legacy clients (which will use the standard pre-FT roaming process). In Adaptive mode, legacy scanners that cannot negotiate 802.11r during association will fall back transparently to standard roaming, while the new iPads leverage FT PSK for minimal-interruption handoffs. If Fast Transition is set to mandatory, legacy clients that do not support 802.11r will fail to associate entirely. Option C uses optimized roaming globally, which is a different mechanism and does not address the iPads' specific need for a standards-based fast roaming solution.
NEW QUESTION # 98
......
After you pay for our 300-110 exam material online, you will get the link to download it in only 5 to 10 minutes. You don't need to worry about safety in buying our 300-110 exam materials. Our products are free from computer virus and we will protect your private information. You won't get any telephone harassment or receiving junk E-mails after purchasing our 300-110 Study Guide. If we have a new version of your study material, we will send an E-mail to you. Whenever you have questions about our 300-110 study material, you are welcome to contact us via E-mail.
300-110 Labs: https://www.vcetorrent.com/300-110-valid-vce-torrent.html