Practicing under these situations helps to kill Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam anxiety. Questions in desktop-based mock exams are identical to the real ones. Our practice exams give you options to change their durations and questions' numbers to polish your skills. You can easily assess your readiness with the assistance of results produced by the practice exam.
| Section | Objectives |
|---|---|
| Network security | - Configure automation - Configure security inspections for industrial protocols - Configure virtual patching |
| Network access control | - Explain OT Ethernet concepts - Configure network segmentation schemas - Configure network access authentication |
| Asset management | - Implement device detection on FortiGate and FortiNAC - Explain OT standard and Fortinet compliance - Fortinet Security Fabric for an OT network |
| Monitoring and risk assessment | - Create FortiAnalyzer event handlers - Analyze security reports from FortiAnalyzer - Perform risk assessment and management |
>> New NSEI_OTS_AR-7.6 Exam Duration <<
If we want to survive in this competitive world, we need a comprehensive development plan to adapt to the requirement of modern enterprises. We sincerely recommend our NSEI_OTS_AR-7.6 preparation exam for our years’ dedication and quality assurance will give you a helping hand on the NSEI_OTS_AR-7.6 Exam. There are so many advantages of our NSEI_OTS_AR-7.6 study materials you should spare some time to get to know. Just have a try and you will love our NSEI_OTS_AR-7.6 exam questions.
NEW QUESTION # 54
As the first step in your OT network protection plan, you must identify the OT protocols that the FortiGate device supports. Which two configurations must you implement on this FortiGate device? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are B and C . The study guide states that "You can use application control signatures to detect OT protocols" and that "Application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" . It also shows that a Modbus application control profile can be enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly supports B , because application control is the feature used to identify and monitor OT protocols on FortiGate.
The guide also explains under IPS that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI" using config ips global and set exclude-signatures none .
Once enabled, FortiGate can use those OT signatures for OT-aware inspection and protection. That supports C as the second required configuration. A is related to device discovery, not protocol identification, and D is focused on exploit and vulnerability detection rather than the first-step goal of identifying OT protocols.
NEW QUESTION # 55
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
NEW QUESTION # 56
You want to improve the security of your OT network and therefore deploy a FortiGate device with the OT signatures database. Which two statements about this database are true? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and D .
Option A is correct because the study guide states that for OT protocol coverage, "a valid OT security service license is required to receive updates on both intrusion prevention and application control signatures." It also shows "Valid license required" in the FortiGuard subscriptions section for OT protocol coverage. This confirms that a valid OT security service license is required to use and maintain the OT signatures database correctly.
Option D is also correct because the guide explicitly shows the CLI configuration used "To enable OT signatures" :
config ips global
set exclude-signatures none
end
It then states that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI." This directly confirms that you must set exclude-signatures to none in the CLI to enable OT signatures.
Option B is incorrect because the study guide does not say you manually import the OT signatures database.
Instead, it explains that FortiGuard maintains updated OT signatures and that a valid license is required to receive updates. Option C is incorrect because the guide clearly says OT signatures are excluded by default until enabled from the CLI.
NEW QUESTION # 57
Refer to the exhibit.
A Virtual Patching profile is shown. You have recently updated your SCADA system and would like to apply the SCADA virtual patching profile. Which two statements about this profile are correct? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are B and D .
Option B is correct because the profile has Medium , High , and Critical selected, while Low severity is not selected. That means low-severity virtual patching signatures are not enforced by this profile. So for the device with MAC address 12:12:12:12:12 , low-severity signatures are not blocked. The study guide explains virtual patching as device-specific protection where "FortiGate caches the signatures and mitigation rules that apply to each device" and applies them when the related traffic matches the firewall policy.
Option D is correct because the Virtual Patching Exemptions table shows a row with the MAC address 11:
11:11:11:11 and no specific signature listed. The study guide states that in the Virtual Patching profile you can "Exempt a specific device with the MAC address or a specific signature." A MAC-only exemption means that specific device is excluded from virtual patching enforcement, so in practical terms it is treated as having no applicable vulnerabilities in this profile.
Option C is incorrect because the profile does not block critical signatures for all devices. The exemptions list proves that at least one device can be excluded by MAC address, and a specific signature can also be exempted. Therefore, enforcement is not universal across all devices.
Option A is incorrect because the entry Schneider.Electric.ClearSCADA.HTTP.Interface.XSS appears as a specific signature exemption , not as the only remaining vulnerability. The profile display is showing exemptions, not a statement that only one vulnerability is still present.
NEW QUESTION # 58
Refer to the exhibit.
A partial OT network is shown.
PLC-1 has a known critical vulnerability, but you cannot update it.
What must you configure to protect PLC-1?
Answer: B
Explanation:
The correct answer is C . This scenario is the precise use case for virtual patching . The OT Security 7.6 study guide states that virtual patching protects OT devices that have not yet been updated against vulnerability exploits . FortiGate identifies the vulnerable asset, queries FortiGuard for device-specific vulnerabilities and mitigation rules, receives applicable OT virtual-patching signatures, and maps those rules to the device. When traffic associated with the vulnerable asset reaches FortiGate, the firewall policy containing the virtual-patching profile applies the protection. In the topology, FortiGate_Level2 is the enforcement point immediately protecting PLC-1 and the control-network assets. IPS at Level 5 provides broader perimeter protection, but it is not the device-specific compensating control requested here.
Application Control primarily regulates industrial protocols and commands. Therefore, Virtual patching on FortiGate_Level2 is required.
NEW QUESTION # 59
......
We have the NSEI_OTS_AR-7.6 bootcamp , it aims at helping you increase the pass rate , the pass rate of our company is 98%, we can ensure that you can pass the exam by using the NSEI_OTS_AR-7.6 bootcamp. We have knowledge point as well as the answers to help you finish the traiing materials, if you like, it also has the offline version, so that you can continue the study at anytime
NSEI_OTS_AR-7.6 New Braindumps Questions: https://www.torrentvce.com/NSEI_OTS_AR-7.6-valid-vce-collection.html