The Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) practice test questions prep material has actual Fortinet NSE 6 - FortiNAC-F 7.6 Administrator exam questions for our customers so they don't face any hurdles while preparing for Fortinet NSE6_FNC_AD-7.6 certification exam. The study material is made by professionals while thinking about our users. We have made the product user-friendly so it will be an easy-to-use learning material. We even guarantee our users that if they couldn't pass the Fortinet NSE6_FNC_AD-7.6 Certification Exam on the first try with their efforts, they can claim a full refund of their payment from us (terms and conditions apply).
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Integration | 25% | - FortiNAC-F Manager configuration - Integration with FortiGate/FortiOS - MDM and third-party device integration - Syslog and SNMP trap integration |
| Topic 2: Network Visibility and Monitoring | 20% | - Logging and reporting - Guest and contractor management - Device profiling and classification - Troubleshooting network and device status |
| Topic 3: Deployment and Provisioning | 30% | - Security automation configuration - Security policies and enforcement - High Availability (HA) setup and monitoring - Access control and logical networks |
| Topic 4: Concepts and Initial Configuration | 25% | - Isolation networks and configuration wizard - Model and organize infrastructure devices - FortiNAC-F architecture and concepts |
>> NSE6_FNC_AD-7.6 Valid Exam Dumps <<
The customers can prepare from the actual NSE6_FNC_AD-7.6 and can clear Fortinet NSE 6 - FortiNAC-F 7.6 Administrator exam with ease and if they failed to do it despite all of their efforts they can get a full refund of their money according to terms and conditions. The NSE6_FNC_AD-7.6 exam solutions is packed with a lot of premium features and it is getting updated on the daily basis according to the syllabus. Fortinet NSE6_FNC_AD-7.6 updates real questions so the students can easily prepare for it and clear Fortinet NSE6_FNC_AD-7.6 exam.
NEW QUESTION # 61
A user was attempting to register their host through the registration captive portal. After successfully registering, the host remained in the registration VLAN. Which two conditions would cause this behavior? (Choose two.)
Answer: A,D
Explanation:
The process of moving a host from a Registration VLAN to a Production VLAN (Access VLAN) is a fundamental part of the FortiNAC-F "VLAN steering" workflow. When a host successfully registers via the captive portal, FortiNAC-F evaluates its Network Access Policies to determine the correct VLAN. If the host remains stuck in the Registration VLAN despite a successful registration, it is typically due to port-level restrictions or the presence of other unregistered devices.
The two most common reasons for this behavior as per the documentation are:
The port default VLAN is the same as the Registration VLAN: If the "Default VLAN" field in the switch port's model configuration is set to the same ID as the Registration VLAN, the port will not change state because FortiNAC-F believes it is already in its "normal" or "forced" state.
There is another unregistered host on the same port: FortiNAC-F maintains the security posture of the physical port. If multiple hosts are connected to a single port (e.g., via a hub or unmanaged switch) and at least one host remains "Rogue" (unregistered), FortiNAC-F will generally keep the entire port in the isolation/registration VLAN to prevent the unregistered host from gaining unauthorized access to the production network.
NEW QUESTION # 62
An administrator wants to use FortiNAC-F to collect an application inventory for hosts. Which two options would satisfy this requirement?
(Choose two.)
Answer: B,C
NEW QUESTION # 63 
An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn ' t working.
What is the problem with the configuration?
Answer: C
Explanation:
In a FortiNAC-F deployment, the configuration of theDHCP scopefor isolation networks (Registration, Remediation, etc.) must perfectly align with the underlying network infrastructure to ensure that isolated hosts can communicate with the FortiNAC appliance. In the provided exhibits, there is a clear discrepancy between theDHCP configurationand theNetwork Topology.
As shown in the " Network Topology " exhibit, theRegistration Networkresides on a router interface (or sub- interface) with the IP address192.168.180.1. This address represents the default gateway for any host placed into the Registration VLAN. However, the " DHCP configuration " exhibit shows the scope " REG-ScopeOne
" configured with aGateway of 10.0.1.254. This 10.0.1.254 address belongs to the management/service network (port2 of FortiNAC), not the registration subnet. If a host in the Registration VLAN receives this incorrect gateway via DHCP, it will attempt to send all off-link traffic to an unreachable IP, preventing it from loading theCaptive Portalor communicating with the FortiNAC server.
According to theFortiNAC-F Configuration Wizard Reference, when defining a Layer 3 network scope, the " Gateway " field must contain the IP address of the router interface that acts as the gateway for that specific isolation VLAN. The FortiNAC appliance itself usually sits on a different subnet, and traffic is directed to it via the router ' s DHCP Relay (IP Helper) and DNS redirection.
" When configuring scopes for a Layer 3 network, theGatewayvalue must be the IP address of the router interface for that subnet. This allows the host to reach its local gateway to route traffic. If the gateway is misconfigured, the host will be unable to reach the FortiNAC eth1/port2 interface for registration... Ensure the Gateway matches the network topology for the isolation VLAN. " -FortiNAC-F Configuration Wizard Reference Manual: DHCP Scopes.
NEW QUESTION # 64
During an evaluation of state-based enforcement, an administrator discovers that ports that should not be under enforcement have been added to enforcement groups.
In which view would the administrator be able to identify who added the ports to the groups?
(Selected)
Answer: A
Explanation:
In FortiNAC-F, accountability and forensic tracking of configuration changes are managed through theAdmin Auditingfunctionality. When an administrator performs an action that modifies the system state-such as creating a policy, changing a device ' s status, or adding a switch port to anEnforcement Group-the system generates an audit record. This record is essential for troubleshooting scenarios where unauthorized or accidental configuration changes have occurred, leading to unintended network behavior.
TheAdmin Auditingview (found underLogs > Admin Auditing) provides a comprehensive log of the " Who, What, and When " for every administrative session. Each entry includes the username of the administrator, the source IP address from which they accessed the FortiNAC-F console, a precise timestamp, and a detailed description of the modification. In the scenario described, where ports have been incorrectly added to enforcement groups, the Admin Auditing view allows a supervisor to filter by the specific " Port " or " Group
" object to identify exactly which administrator executed the command.
In contrast, theEvent Managementview (B) is designed to monitor system and network events, such as RADIUS authentications, host connections, and SNMP trap arrivals. While it tracks system activity, it does not typically log the manual configuration changes performed by admins. ThePort Changesview (C) tracks the operational history of a port (such as VLAN assignment changes and host movements) but does not attribute the administrative assignment of the port to a group. Finally, theSecurity Eventsview (D) is dedicated to alerts triggered by security rules and external threat feeds.
" Admin Auditing displays a record of all modifications made to the FortiNAC-F system by an administrator.
This view includes the administrator ' s name, the date and time of the change, and a description of the action taken. It is the primary resource for determining which administrative user performed a specific configuration change, such as modifying port group memberships or altering policy settings. " -FortiNAC-F Administration Guide: Logging and Auditing Section.
NEW QUESTION # 65
Refer to the exhibit.
When configuring guest access using a network access policy, where would an administrator configure the Guest-VLAN value?
Answer: A
Explanation:
The correct answer is A . In the exhibit, Guest-VLAN is selected as the network access policy Configuration
. That policy configuration points to a logical network, but the actual access value for that logical network is not defined inside the guest template, user/host profile, or guest portal. The FortiNAC-F study guide explains that logical networks translate policy-level names into device-specific access values, and those values are configured in the Model Configuration of the infrastructure device. It specifically states that device-specific configurations for infrastructure devices associate the configuration values with the devices, and that after a logical network is created, it appears within the model configuration of each modeled infrastructure device.
So, Guest-VLAN is the logical network selected by the network access policy, while the actual VLAN ID, VLAN name, SSID role, controller group, or vendor-specific access value is configured under the relevant switch, AP, controller, or firewall Model Configuration . Option B is wrong because the guest template defines guest account properties such as role, security/access value, password settings, account duration, and login availability. Option C is wrong because the user/host profile defines the matching condition for guests.
Option D is wrong because the guest portal controls onboarding or login behavior, not the infrastructure access value used to provision the endpoint.
NEW QUESTION # 66
......
Fortinet certification is one of the best golden-content certifications in IT expert field all over the world, and it is also the necessary condition of choosing talents standard in large enterprises. NSE6_FNC_AD-7.6 exam questions answers is useful for candidates who are eager to go through the examination. There are thousands of companies recognized and valued the certification in the world. NSE6_FNC_AD-7.6 Exam Questions Answers will make you pass exam easily.
Valid NSE6_FNC_AD-7.6 Test Labs: https://www.itexamguide.com/NSE6_FNC_AD-7.6_braindumps.html