What's more, part of that BraindumpsVCE NSE5_FSW_AD-7.6 dumps now are free: https://drive.google.com/open?id=1FnALtW54McEmyeqlxJHj2aqzzT5ABXd_
The Fortinet NSE5_FSW_AD-7.6 Exam registration fee varies between 100 usd and 1000 usd, and a candidate cannot risk wasting his time and money, thus we ensure your success if you study from the updated Fortinet NSE5_FSW_AD-7.6 practice material. We offer the demo version of the actual Fortinet NSE5_FSW_AD-7.6 questions so that you may confirm the validity of the product before actually buying it, preventing any sort of regret.
| Section | Objectives |
|---|---|
| Topic 1: Layer 2 control and security | - Use port security options on FortiSwitch - Use ACLs, security profiles, and VLAN security mechanisms on FortiSwitch - Use filtering and antispoofing techniques on FortiSwitch |
| Topic 2: FortiSwitch concepts | - Use QoS and LLDP-MED on FortiSwitch - Configure VLANs using FortiSwitch - Configure STP to prevent network loops - Configure the ports required for stack deployment - Configure switch ports, split port, and available transceivers - Configure switching and routing on FortiSwitch |
| Topic 3: Deployment and management | - Deploy FortiSwitch supported deployment topologies - Deploy and configure FortiSwitch in a multi-tenancy environment - Configure and provision FortiSwitch |
| Topic 4: Monitoring and troubleshooting | - Use tools to view and extract network information from FortiSwitch - Interpret system logs, monitor port statistics, and diagnose connectivity issues - Troubleshoot FortiLink issues - Use packet capturing methods to monitor and troubleshoot traffic issues |
>> Exam Fortinet NSE5_FSW_AD-7.6 Testking <<
The Fortinet NSE5_FSW_AD-7.6 certification exam is one of the hottest and career-oriented Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) exams. With the Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) exam you can validate your skills and upgrade your knowledge level. By doing this you can learn new in-demand skills and gain multiple career opportunities. To do this you just need to enroll in the Fortinet NSE5_FSW_AD-7.6 Certification Exam and put all your efforts to pass this important Fortinet NSE5_FSW_AD-7.6 Exam Questions. However, you should keep in mind that to get success in the Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) exam is not an easy task.
NEW QUESTION # 106
Refer to the exhibit.
The LLDP profile shown in the exhibit was configured to detect IP phones and automatically assign them to the appropriate VLAN. You apply this LLDP profile on a FortiSwitch port. Which configuration should you enable on the FortiSwitch profile to collect detailed information about all the connected IP phones? (Choose one answer)
Answer: D
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED) is an enhancement to standard LLDP that provides advanced discovery and configuration for endpoints li1ke IP phones. While the current configuration in the exhibit correctly handlesNetwork Policy TLVsto advertise QoS2and VLAN settings to the phones, it is missing the specific component required for data collection.34 To coll5ect detail6ed information such as themanufacturer, software version, hardware version, and serial or asset numbers, you mustEnable LLDP-MED inventory management TLVs (Option C). The documentation specifies that when the inventory-management TLV is active, the switch can retrieve these extensive device characteristics from the connected Media Endpoints. This information is then visible to the administrator through the FortiGate or FortiSwitch monitoring tools, providing a complete hardware inventory of the voice network.
Regarding the other options:Option Ais unnecessary because a single LLDP profile can support multiple TLV types simultaneously by adding them to the med-tlvs string.Option Bis already partially implemented in the exhibit's network policy but does not contribute to device detection or data collection.Option Dis used for automatic trunking between FortiSwitches and is unrelated to endpoint device information. Therefore, the addition of the inventory-management TLV is the specific requirement to fulfill the goal of collecting detailed IP phone data.
NEW QUESTION # 107
Refer to the configuration:
Which two conditions does FortiSwitch need to meet to successfully configure the options shown in the exhibit above? (Choose two.)
Answer: A,B
NEW QUESTION # 108
(Full question statement start from here)
Refer to the exhibit.
You run the command diagnose switch-controller switch-info loopguard access-1 and see that theMAC-Move column displays a value of0forport1.
What does this indicate? (Choose one answer)
Answer: C
Explanation:
In FortiSwitchOS 7.6,Loop Guardis a Layer 2 loop detection mechanism primarily designed to protect access ports from unintended network loops. In itsoriginal implementation, Loop Guard only detected loops on the native VLAN, which limited its effectiveness in environments using multiple tagged VLANs. To address this limitation, Fortinet enhanced Loop Guard by introducing theMAC move detection feature, as documented in the FortiSwitchOS 7.6 Administrator Guide.
TheMAC move optioninstructs the FortiSwitch to monitor for repeated MAC address flapping events across ports or VLANs. Such MAC movement is a strong indicator of a Layer 2 loop. However, this enhanced detection mechanism isdisabled by defaultand must be explicitly enabled by configuring aMAC move threshold greater than zero.
According to the FortiSwitchOS 7.6 Administrator Guide (page 164), enabling MAC move allows Loop Guard to detect loops beyond the native VLAN. Furthermore, the guide explicitly states (page 166) thata MAC-Move value of 0 indicates that the MAC move feature is not enabled. This means the switch is not monitoring MAC address movement as part of its loop detection logic, even though Loop Guard itself may still be enabled on the port.
Therefore, a MAC-Move value of 0 does not indicate that Loop Guard is disabled or inactive, nor does it imply VLAN-wide port shutdown behavior. It strictly confirms thatMAC move detection has not been enabled, makingOption Cthe correct and fully verified answer based on FortiSwitchOS 7.6 documentation.
NEW QUESTION # 109
Exhibit.
Two routes are not installed in the forwarding information base (FIB) as shown in the exnibit. Which two statements about these two route entries are true? (Choose two.)
Answer: C,D
Explanation:
From the exhibit and the details given about the routes not installed in the FIB:
* These two routes have a higher administrative distance value available to the destination networks (Option A): Administrative distance is a measure used by routers to select the best path when there are two or more different routes to the same destination from two different routing protocols. A higher administrative distance means that the route is considered less trustworthy, thus not selected for the FIB unless the more preferred routes fail.
* These two routes will become primary, if the best routes are removed (Option B): In routing, if the currently installed routes (which are considered the best due to reasons like lower administrative distance) are removed or become unavailable, the next best routes based on administrative distance will be used. This behavior ensures redundancy and maintains network connectivity in diverse scenarios.
References:
This approach is aligned with standard routing protocol behavior as documented in networking protocols and Fortinet's routing mechanisms which prioritize routes based on administrative distance and other metrics to maintain efficient and reliable network routing.
NEW QUESTION # 110
Which drop policy mode, if assigned to a congested port, will drop incoming packets until there is no congestion on the egress port?
Answer: B
Explanation:
Tail-drop mode is a congestion management technique used in network devices, including FortiSwitches, to handle congestion on network ports:
* Tail-Drop Mode (A):
* Behavior:When a queue reaches its maximum capacity on a congested port, tail-drop mode simply drops any incoming packets that arrive after the buffer is full. This continues until the congestion is alleviated and there is space in the queue to accommodate new packets.
* Application:This is a straightforward approach used when the device's buffer allocated to the port becomes full due to sustained high traffic, preventing buffer overflow and maintaining system stability.
References:For more details on congestion management techniques and settings on FortiSwitch, you can refer to the configuration manuals available on:Fortinet Product Documentation
NEW QUESTION # 111
......
It is not easy for you to make a decision of choosing the NSE5_FSW_AD-7.6 prep guide from our company, because there are a lot of study materials about the exam in the market. However, if you decide to buy the NSE5_FSW_AD-7.6 test practice files from our company, we are going to tell you that it will be one of the best decisions you have made in recent years. As is known to us, the NSE5_FSW_AD-7.6 Preparation materials from our company are designed by a lot of famous experts and professors in the field. There is no doubt that the NSE5_FSW_AD-7.6 prep guide has the high quality beyond your imagination.
NSE5_FSW_AD-7.6 Passed: https://www.braindumpsvce.com/NSE5_FSW_AD-7.6_exam-dumps-torrent.html
BONUS!!! Download part of BraindumpsVCE NSE5_FSW_AD-7.6 dumps for free: https://drive.google.com/open?id=1FnALtW54McEmyeqlxJHj2aqzzT5ABXd_