Don't miss practicing the NSEI_OTS_AR-7.6 mock exams and score yourself honestly. You have all the time to try Fortinet NSEI_OTS_AR-7.6 practice exams and then be confident while appearing for the final turn. The desktop software works on Windows and the web-based format works on all operating systems. With PDF questions, you can prepare for the NSEI_OTS_AR-7.6 Certification Exam while sitting back at our place.
| Section | Weight | Objectives |
|---|---|---|
| Network Access Control | 25% | - OT Ethernet and industrial communication models - Authentication and access policies for OT devices - Purdue Model and secure network segmentation |
| Monitoring and Risk Assessment | 25% | - Threat detection using FortiSIEM 7.4 - Event handling and logging with FortiAnalyzer 7.6 - OT-focused risk assessment and management |
| Asset Management | 25% | - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments - Device detection and inventory using FortiGate & FortiNAC |
| Network Security | 25% | - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Security automation and threat response - Virtual patching for legacy OT systems |
>> 100% NSEI_OTS_AR-7.6 Exam Coverage <<
As we all know, through the judicial examination, you need to become a lawyer, when the teacher is need through the teachers' qualification examinations. If you want to be an excellent elites in this line, you need to get the Fortinet NSE I - OT Security 7.6 Architect certification, thus it can be seen through the importance of qualification examination. Only through qualification examination, has obtained the corresponding qualification certificate, we will be able to engage in related work, so the NSEI_OTS_AR-7.6 Test Torrent is to help people in a relatively short period of time a great important tool to pass the qualification test.
NEW QUESTION # 52
Refer to the exhibit.
A basic event handler is shown. You have enabled Automation Stitch to automate the handling of an alert.
Which two steps must you take to use this automation stitch? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are C and D .
Option D is correct because the study guide states that the configuration of an event handler can include
"Rules" and explains that "Rules are granular conditions" and "Event handlers can have one or more rules." It further states that "FortiAnalyzer uses event handlers to filter all incoming logs" and "If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Therefore, to use the automation stitch, you must define the rules on FortiAnalyzer so the event handler can actually generate the event that starts the automation flow.
Option C is also correct. The study guide explains that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to the FortiGate side, and in the attack-detection example it says "FortiAnalyzer parses the logs and notifies the root FortiGate" and then
"The root FortiGate triggers the action." It also explicitly shows "Stitches configured on root FortiGate." This means the FortiGate must have the corresponding automation trigger configured for the FortiAnalyzer event handler notification.
Option A is incorrect because the study guide does not describe configuring an Action on FortiAnalyzer as the required step for this FortiAnalyzer-to-FortiGate automation-stitch flow. Option B is also incorrect because playbooks are a different FortiAnalyzer automation mechanism; the question specifically refers to using the Automation Stitch option in the event handler.
NEW QUESTION # 53
You want to improve access control for your large OT network using passive authentication. What must you configure on FortiGate? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. Fortinet Single-Sign On (FSSO) . The study guide states under Active and Passive Authentication that for passive authentication, "User does not receive a login prompt from FortiGate" ,
"Credentials are determined automatically" , and specifically "FSSO, RSSO, and NTLM can be used." It then explains that passive authentication occurs with the single sign-on method and explicitly identifies Fortinet SSO (FSSO) as one of those methods.
The guide also says: "For passive authentication, you can implement FSSO. FSSO allows users who have already authenticated on the network through another system to be transparently identified. After initial login to any system on the network, users can access allowed resources without being prompted for credentials." That is exactly what the question asks for: improving access control in a large OT network using passive authentication .
The other options do not match passive authentication. Local users are part of local authentication, two- factor authentication adds an extra security factor but still uses active authentication, and FortiAuthenticator as a remote server supports centralized authentication for mid-to-large networks, but by itself it is not the specific passive-authentication method being asked here. The study guide is explicit that the FortiGate configuration for passive authentication is FSSO .
NEW QUESTION # 54
Refer to the exhibit.
The OT devices behind the ruggedized FortiGate have vulnerabilities and you want to apply a virtual patching profile in the firewall policy. Why is Virtual Patching not available in the Security Profiles section? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. You must enable Virtual Patching in the Feature Visibility section .
The study guide states clearly that "By default, virtual patching profiles are hidden on the GUI, and you must enable them through System > Feature Visibility." That exactly matches the situation in the exhibit, where Virtual Patching does not appear under Security Profiles . So the issue is not that the feature is unsupported, but that it is simply hidden in the GUI until it is enabled.
The other options do not answer the question being asked. A valid OT security service license is required for virtual patching signatures and protection workflow, and OT signatures are relevant to IPS-based OT protection, but those do not explain why the menu item itself is missing from the Security Profiles section .
The guide specifically identifies Feature Visibility as the reason the Virtual Patching profile is not shown in the GUI. Therefore, the required action is to enable Virtual Patching in System > Feature Visibility .
NEW QUESTION # 55
Which industrial protocol does not support VLANs? (Choose one answer)
Answer: A
Explanation:
The correct answer is C. EtherCAT .
The study guide states that for industrial Ethernet protocols, "such as Ethernet/IP and Modbus/TCP, you can use VLANs to segment your physical LAN into multiple logical LANs." This directly confirms that Ethernet/IP and Modbus/TCP support VLAN-based segmentation in the OT context.
By contrast, the guide explains that "EtherCAT skips layers 3 to 6 to deliver real-time communication" and describes it as an "Open-Software Modified-Ethernet" approach. Because it does not operate like the standard Ethernet/IP model used for normal VLAN-based segmentation, EtherCAT is the protocol identified here as not supporting VLANs in the way Ethernet/IP and Modbus/TCP do.
So, based on the study guide comparison, the verified answer is EtherCAT .
NEW QUESTION # 56
Refer to the exhibit.
An industrial Ethernet protocol skipping layers 3 to 6 is shown. Which industrial Ethernet protocol is it?
(Choose one answer)
Answer: A
Explanation:
The correct answer is D. EtherCAT . The study guide explicitly states under the Ethernet/IP and EtherCAT section that "EtherCAT is a protocol that offers real-time communication in a primary-secondary configuration" and "EtherCAT skips layers 3 to 6 to deliver real-time communication." It also adds that
"the most important feature of this protocol is that secondary devices collect only the information they need from the data packets." This matches the exhibit exactly, where the diagram shows Real-Time Data above a Proprietary MAC and Proprietary physical layer , reflecting the protocol structure that bypasses the intermediate OSI layers.
The other options do not match this behavior. The guide says POWERLINK uses layer 2 and layer 7 of the OSI model, not that it skips layers 3 to 6. It also explains that Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the OSI model. Modbus is described as an open client/server protocol and is not suitable for transmitting data in real time . Therefore, the protocol in the exhibit is clearly EtherCAT .
NEW QUESTION # 57
......
We often ask, what is the purpose of learning? Why should we study? Why did you study for NSEI_OTS_AR-7.6exam so long? As many people think that, even if one day we forget the formula for the area of a triangle, we can still live very well, but if it were not for the knowledge of learning NSEI_OTS_AR-7.6 Exam and try to obtain certification, how can we have the opportunity to good to future life? So, the examination is necessary, only to get the test NSEI_OTS_AR-7.6 certification, get a certificate, to prove better us, to pave the way for our future life.
Free NSEI_OTS_AR-7.6 Study Material: https://www.actualcollection.com/NSEI_OTS_AR-7.6-exam-questions.html