Huawei H12-351_V1.0 Lab Questions, Latest H12-351_V1.0 Material

BONUS!!! Download part of ExamDumpsVCE H12-351_V1.0 dumps for free: https://drive.google.com/open?id=1hlIbgHsHtIJh02GR05uk0BkkelTsycIG

Some candidates have doubt about our one-year free updates and one year service assist for buyers who purchase ExamDumpsVCE H12-351_V1.0 valid exam bootcamp files. Please rest assured. We have been engaging in offering IT certificate exams materials many years and we pursue long-term development. We provide the warm and 24-hours online service for every buyer who has any question about our H12-351_V1.0 Valid Exam Bootcamp files. If we release new version for the H12-351_V1.0 exam files, we will notify buyers via email for free downloading.

Huawei H12-351_V1.0 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: WLAN Networking and Deployment	20%	- WLAN Networking Modes 1. Direct connection and Layer 2 networking 2. CloudCampus WLAN architecture 3. Layer 3 and inter-subnet roaming - High-Density and Large-Scale Deployment 1. AP placement and channel planning 2. IPv6 support in WLAN 3. Power adjustment and coverage design
Topic 2: WLAN Basic Principles and Architecture	15%	- Huawei WLAN Architecture 1. Fat AP vs Fit AP 2. WLAN AC and AP working mechanism 3. CAPWAP protocol - RF and 802.11 Protocol Fundamentals 1. 802.11 physical and MAC layer 2. Radio frequency characteristics 3. Frequency bands and channels
Topic 3: WLAN Reliability and Radio Resource Management	20%	- WLAN Redundancy and Reliability 1. Mesh and WDS technologies 2. AP redundancy and fast failover 3. AC backup and load balancing - Radio Resource Management 1. Dynamic channel and power adjustment 2. Admission control and load balancing 3. Interference detection and mitigation
Topic 4: WLAN Advanced Technologies and Solutions	15%	- Roaming and Location Services 1. Wi-Fi positioning and location technology 2. Layer 2 and Layer 3 fast roaming - WLAN and IoT Convergence 1. CloudCampus and smart campus solutions 2. IoT access over WLAN
Topic 5: WLAN O&M, Troubleshooting and Optimization	15%	- Troubleshooting and Optimization 1. Common fault analysis and resolution 2. RF optimization and network capacity tuning - Monitoring and Intelligent O&M 1. Fault diagnosis and alarm management 2. WLAN performance monitoring
Topic 6: WLAN Security and Access Control	15%	- Security Defense 1. Rogue AP detection and containment 2. Access control and policy management 3. Anti-interference and anti-spoofing - Authentication and Encryption 1. WPA/WPA2/WPA3 security 2. Certificate-based authentication 3. 802.1X, MAC, and Portal authentication

>> Huawei H12-351_V1.0 Lab Questions <<

Quiz Efficient H12-351_V1.0 - HCIE-WLAN (Written) V1.0 Lab Questions

In the PDF version, the HCIE-WLAN (Written) V1.0 (H12-351_V1.0) exam questions are printable and portable. You can take these HCIE-WLAN (Written) V1.0 (H12-351_V1.0) pdf dumps anywhere and even take a printout of HCIE-WLAN (Written) V1.0 (H12-351_V1.0) exam questions. The PDF version is mainly composed of real Huawei H12-351_V1.0 Exam Dumps. ExamDumpsVCE updates regularly to improve its HCIE-WLAN (Written) V1.0 (H12-351_V1.0) pdf questions and also makes changes when required.

Huawei HCIE-WLAN (Written) V1.0 Sample Questions (Q61-Q66):

NEW QUESTION # 61
Assume that two sites are 3 km away from each other in a project To implement data backhaul between the two sites, which of the following information needs to be collected by engineers?

A. Use of 2.4 GHz channels between the two sites
B. Use of 5 GHz channels between the two sites
C. Bandwidth requirement
D. Information about obstacles between the sites

Answer: B,C,D

NEW QUESTION # 62
Which of the following encapsulation formats are used for EAP termination in 802.1X authentication? (Select All that apply)

A. EAPoL
B. EAPoR
C. EAP
D. EAP-TLS

Answer: A,B

Explanation:
Explanation
According to the Huawei documents and resources, the encapsulation formats used for EAP termination in
802.1X authentication are as follows:
B: EAPoL: The client and access device exchange information using EAPoL packets across the LAN2.
C: EAPoR: The access device directly encapsulates the received EAP packets into RADIUS using EAP over RADIUS (EAPoR) packets Therefore, B and C are the correct answers. References:
https://support.huawei.com/enterprise/en/doc/EDOC1100086527

NEW QUESTION # 63
In a VRRP HSB scenario, if the VRRP preemption delay is set to a small value, which of the following problems may occur after a master/backup switchover? (Select All that apply)

A. A master/backup switchback is triggered too quickly.
B. Service data on the master and backup WACs is lost.
C. Backup information is incomplete.
D. The batch backup process cannot be started.

Answer: A,C

Explanation:
Explanation
According to the Huawei documents and resources, the VRRP preemption delay is the time that an AC waits before preempting another AC with a lower priority. If the VRRP preemption delay is set to a small value, the following problems may occur after a master/backup switchover:
B: A master/backup switchback is triggered too quickly. If the master AC recovers soon after a switchover, it may preempt the backup AC again and become the master AC. This may cause frequent switchovers and affect network stability C: Backup information is incomplete. If the backup AC takes over services from the master AC too quickly, it may not have received all the data synchronized from the master AC through HSB. This may cause service interruption or data loss Therefore, B and C are the correct answers. References:
https://support.huawei.com/enterprise/en/doc/EDOC1100064368/80fc2ebd/example-for-configuring-vrrp-hsb
2: https://support.huawei.com/enterprise/en/doc/EDOC1100096325/1a753937/vrrp-hsb-configuration

NEW QUESTION # 64
Which of the following statements about WLAN roaming and signal strength Is false?

A. Generally, a STA roams when it detects that the signal strength is less than -75 dBm.
B. Smart roaming can be enabled on the WAC to help ST As roam and associate with APs with better signals.
C. STAs can roam between WACs in dual-link HSB mode.
D. In most cases, the signal strength of a STA should range from -45 dBm to -65 dBm.

Answer: A

Explanation:
B is false because generally, a STA roams when it detects that the signal strength is less than -70 dBm or -65 dBm, not -75 dBm.
References: https://support.huawei.com/enterprise/en/doc/EDOC1100058940/8a8f1c9b/wlan-roaming-and- signal-strength

NEW QUESTION # 65
Which of the following statements about EAP relay and EAP termination are false? (Select All that apply)

A. In EAP termination mode, an access device encapsulates EAP packets sent by an 802. IX client Into RADIUS packets, without processing the data in the EAP packets.
B. In EAP relay mode, an access device extracts information from EAP packets, encapsulates the information into RADIUS packets, and sends the RADIUS packets to an authentication server.
C. In EAP termination mode, an access device extracts client authentication information from the EAP packets sent by a client and encapsulates the information using the standard RADIUS protocol. The access device supports only the EAP MD5-Challenge authentication method.
D. The EAP termination mode simplifies the processing on an access device and supports various authentication methods. However, this mode requires an authentication server to support EAP and have high processing capability.

Answer: A,D

Explanation:
* A. In EAP termination mode, an access device encapsulates EAP packets sent by an 802. IX client Into RADIUS packets, without processing the data in the EAP packets. This statement is false because in EAP termination mode, an access device extracts informat ion from EAP packets, encapsulates the information into RADIUS packets, and sends the RADIUS packets to an authentication server 2 .
* D. The EAP termination mode simplifies the proce ssing on an access device and supports various authentication methods. However, this mode requires an authentication server to support EAP and have high processing capability. Thi s statement is false because it describes the EAP relay mode, not the EAP termination mode 2 .
Therefore , A and D are the correct answers. References: 2 : https://support.huawei.com/enterprise/en/doc
/EDOC1100086527

NEW QUESTION # 66
......

We can provide you with a safety and efficiency shopping experience when you choose ExamDumpsVCE H12-351_V1.0 test Camp Questions. You see, we use Paypal to do the payment, so the payment process is secured and your personal information is secret and protected. In addition, the payment process is very easy to operate. You will receive an email attached with H12-351_V1.0 study pdf after your payment in about 5-10 minutes, then you can start your study immediately.

Latest H12-351_V1.0 Material: https://www.examdumpsvce.com/H12-351_V1.0-valid-exam-dumps.html

BTW, DOWNLOAD part of ExamDumpsVCE H12-351_V1.0 dumps from Cloud Storage: https://drive.google.com/open?id=1hlIbgHsHtIJh02GR05uk0BkkelTsycIG