最近多くの受験者たちはXhs1991の商品で試験に合格しましたので、我々は我々のWorkday-Pro-Absence問題集を推薦します。我々は信頼できる問題集を開発して、皆様はこのような問題集を利用してWorkdayのWorkday-Pro-Absence試験に合格するのは我々の喜びです。我々は引き続き商品の質量のために努力します。
| Section | Objectives |
|---|---|
| Workday HCM Core Concepts | - Payroll concepts relevant to Absence - Key HCM Core concepts |
| Leave of Absence Configuration | - Calculated fields - Leave components - Leave of absence business processes |
| Time Off Configuration | - Time off plan administration - Time off business processes - Time off calculations |
| Time Off Management | - Overrides - Corrections - Adjustments |
| Leave of Absence Management | - Leave administration - Managing leave requests |
現在のこの社会の中で、優秀な人材が揃って、IT人材も多く、競争もとてもはげしくて、だから多くのIT者はIT認証試験に参加してIT業界での地位のために奮闘して、Workday-Pro-Absence試験はWorkdayの一つ重要な認証試験で、多くの人がWorkday認証されたくて試験に合格しなければなりません。
質問 # 14
Refer to the following scenario to answer the question below.
You configured two leave types, Short Term Disability and Long Term Disability. It is common that workers need to be placed on Long Term Leave once they have exhausted Short Term Leave.
You need to streamline the process of moving employees from Short Term Disability Leave to Long Term Disability Leave.
What will you configure in the business process to make it happen?
正解:C
解説:
The Request Leave of Absence business process must contain the Automated Leave Processing service. For cascading leaves, this service is normally added after the completion step with a step delay. The delay determines when Workday evaluates the current leave's ending condition and initiates the transition.
When the Short Term Disability leave reaches the configured date, Automated Leave Processing generates a return request for the current leave. If the worker meets the eligibility requirements for the Next Leave Type, it also generates a request to begin Long Term Disability Leave. Conditions can be added to the service step to restrict automated processing to specified leave types.
Automated Absence Case Creation creates absence cases when configured absence-case thresholds are met; it does not move workers between leave types. Time Off Balance Transfer is used during job changes to transfer or pay out time off plan balances. Update Time Off Requests updates future time off requests when staffing changes affect plan eligibility. Neither subprocess performs cascading-leave processing.
Study Guide reference: Absence Management Business Processes - Automated Leave Processing Service .
質問 # 15
An absence administrator needs to group all statutory leaves together. In another group, they must place all non-statutory leaves.
What can the absence administrator create to group the leave types into their appropriate categories?
正解:B
解説:
Leave families group related leave types into functional categories. When users initiate a leave request, Workday presents the leave family name as the category containing the associated leave types. The administrator should therefore create one family for statutory leave types and a second family for non- statutory leave types.
This structure provides a clear functional distinction while preserving the individual rules, eligibility, validations, entitlements, balance calendars, and payroll effects configured on each underlying leave type.
Leave families can also participate in coordinated-leave configuration when units taken from leave types in the same family must affect related entitlement balances.
Placing all leave types in one family would eliminate the required category separation; different eligibility rules would change worker access but would not produce separate leave-family groupings. Leave type security segments control access to specified leave types for roles such as Employee as Self or Manager. They are security boundaries rather than functional leave categories. An absence table can combine absence-related data or selection behavior for other purposes, but it is not the primary Workday component for grouping leave types into statutory and non-statutory categories. Two leave families directly satisfy the requirement.
Reference: Workday Education - Absence for Administrators: Leave of Absence, "Leave Families"
質問 # 16
What task would you use to manually set up a new period schedule in Workday?
正解:D
解説:
The delivered task used to manually establish a period schedule is Set Up Period Schedule. This task creates the schedule framework and enables the administrator to define its frequency and periods directly in the Workday tenant. Period schedules are foundational to Absence configuration because they establish the processing periods used for accruals, time off transactions, reporting, and period-based eligibility evaluation.
Generate Period Schedule Periods serves a different purpose. It extends an existing supported schedule by generating future periods from its established pattern; it is not the manual setup task for a new schedule.
"Produce Period Schedule Periods" is not the applicable delivered task. Although Workday course materials may describe the overall activity as creating a period schedule and reference period-schedule creation functionality, the task label tested by this question is Set Up Period Schedule.
During setup, administrators should specify the correct frequency and application usage and ensure that the periods are consecutive. Workday Absence, Payroll, and Time Tracking can share a schedule when their period dates align. After creating the schedule, it can be selected on a time off plan, where it governs accrual frequency, processing periods, reporting intervals, and available effective dates.
Reference: Workday Pro Absence course topic - Period Schedule: Set Up a Period Schedule; Workday Education - Absence for Administrators: Time Off Plans and Components
質問 # 17
You need to prevent workers' Time Off Plan balances from exceeding 200 hours.
How will you do so?
正解:C
解説:
A time off plan's Upper Limit specifies the maximum number of hours or days that a worker can accumulate in the plan balance. Setting the upper limit to 200 hours instructs Workday to compare the worker's calculated balance with that ceiling during accrual processing. When a calculated accrual would raise the balance above
200 hours, Workday reduces the accrual by the excess amount. The excluded amount is reported as forfeited accrual.
For example, if a worker has 195 hours and is scheduled to accrue 12 hours, the preliminary balance is 207 hours. Workday applies the 200-hour upper limit and reduces the accrual by seven hours. The worker receives five hours, producing a final balance of 200 hours.
A Carryover Limit applies only when balances move from one balance period to the next; it does not prevent the balance from exceeding a threshold during the current period. Maximum Unpaid Time Off Units Allowed validates requests that exceed the available paid balance and is unrelated to accumulation. A Lower Limit controls how far a balance may be reduced before requested time becomes unpaid. Consequently, only the Upper Limit directly enforces the maximum accumulated plan balance.
Reference: Workday Education - Absence for Administrators: Time Off Plans and Components, "Upper Limits"
質問 # 18
You have set the time off lower limit to zero.
What can you do to ensure workers can request only paid time off?
正解:A
解説:
A lower limit of zero means Workday treats time off that would reduce the plan balance below zero as unpaid.
That calculation setting alone does not necessarily stop the worker from submitting the request; it determines how much of the requested absence can be processed as paid.
To prohibit unpaid time off, configure the Maximum Unpaid Time Off Units Allowed validation with a value of zero. This establishes that no portion of the request may be unpaid. The Do Not Allow Request checkbox must also be selected so that a request failing the validation produces an error and cannot be saved or submitted. If that checkbox is cleared, Workday generates a warning but permits the request to proceed, which does not satisfy the requirement that workers request only paid time.
Setting the maximum unpaid units to eight would explicitly permit up to eight unpaid hours or days, depending on the plan's unit of time. Therefore, options B and D conflict with the requirement. Option A uses the correct zero-unit threshold but configures only a warning. The combination in option C creates a hard validation: zero unpaid units are permitted, and any request exceeding the available paid balance is blocked.
Reference: Workday Education - Absence for Administrators: Time Off Validations, "Maximum Unpaid Time Off Units Allowed" and "Do Not Allow Request"
質問 # 19
......
Workday-Pro-Absence試験に向けて勉強しているときは、家族のためなど、仕事に行くのに忙しいかもしれません。誰もが効率的な仕事をするための時間は貴重です。優れたWorkday-Pro-Absence準備ガイドを取得したい場合、合格するまでの時間を短縮する必要があります。キーポイントと最新情報を選択して、Workday-Pro-Absenceガイドトレントを完成させています。練習するのに20時間から30時間しかかかりません。効果的な練習の後、Workday-Pro-Absence試験トレントから試験ポイントを習得できます。その後、Workday-Pro-Absence試験に合格するのに十分な自信があります。
Workday-Pro-Absence認定資格: https://www.xhs1991.com/Workday-Pro-Absence.html