2026 Latest VCEDumps JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1NvQmGW49iBi5oaQ0P1hZWbDyPvjX0Dk4
Many clients may worry that if they buy our product they will fail in the exam but we guarantee to you that our JN0-364 study questions are of high quality and can help you pass the exam easily and successfully. Our product boosts 99% passing rate and high hit rate so you neednโt worry that you canโt pass the exam. Our JN0-364 exam torrent is compiled by experts and approved by experienced professionals and updated according to the development situation in the theory and the practice. Our Service Provider Routing and Switching, Specialist (JNCIS-SP) guide torrent can simulate the exam and boosts the timing function. The language is easy to be understood and makes the learners have no learning obstacles. So our JN0-364 Exam Torrent can help you pass the exam with high possibility.
| Section | Objectives |
|---|---|
| Topic 1: MPLS and Service Provider Technologies | - VPN services
|
| Topic 2: BGP and Routing Policy | - BGP fundamentals
|
| Topic 3: OSPF and IS-IS Routing Protocols | - OSPF configuration and troubleshooting
|
| Topic 4: Troubleshooting and Operations | - Network troubleshooting methodology
|
| Topic 5: Service Provider Architecture & Junos Fundamentals | - Service provider network design basics
|
>> JN0-364 Study Materials Review <<
The JN0-364 certification exam is essential for future development, and the right to a successful JN0-364 exam will be in your own hands. As long as you pass the exam, you will take a step closer to your goal. However, unless you have updated JN0-364 exam materials, or passing the exam's mystery is quite challenging. Thousands of people tried the JN0-364 exams, but despite having good professional experience and being well-prepared, the regrettable exam failed. One of the main reasons for the failure may be that since practice and knowledge alone are not enough, people need to practice our VCEDumps JN0-364 Exam Materials, otherwise they cannot escape reading. Well, you are in the right place. The JN0-364 questions on our VCEDumps are one of the most trustworthy questions and provide valuable information for all candidates who need to pass the JN0-364 exam.
NEW QUESTION # 134
You are asked to create connections between routing instances on the same Junos device and route between the connected Instances. What are two ways to accomplish this task? (Choose two.)
Answer: A,B
Explanation:
To create connections between routing instances on the same Junos device and route between them, you can use logical tunnel interfaces, which are virtual interfaces that can be used to route traffic between instances without the need for physical connectivity. Additionally, loopback interfaces, which represent the device itself, can be used to route traffic between routing instances as they are always up and can be reached within the device.
NEW QUESTION # 135
Exhibit:
user@Router-1> show route 172.24/16
inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
...
172.24.0.0/24 *[OSPF/150] 01:31:31, metric 0, tag 0
> to 172.20.0.2 via ge-0/0/2.0
to 172.20.1.2 via ge-0/0/3.0
user@Router-1> show route forwarding-table
Routing table: default.inet
Internet:
Destination Type RtRef Next hop Type Index NhRef Netif
...
172.24.0.0/24 user 0
172.20.0.2 ucst 551 2 ge-0/0/2.0
172.20.1.2 ucst 552 2 ge-0/0/3.0
Referring to the exhibit, which two statements are true? (Choose two.)
Answer: A,C
Explanation:
In Junos OS, understanding the distinction between theRouting Information Base (RIB)and theForwarding Information Base (FIB)is fundamental to analyzing traffic patterns and load-balancing behavior. The RIB (show route) contains all prefixes learned via various protocols, while the FIB (show route forwarding-table) contains only the active next-hops that are actually programmed into the Packet Forwarding Engine (PFE).
According to Juniper Networks technical documentation, the default behavior for Junos OS when encounteringEqual-Cost Multipath (ECMP)routes is to select only a single next-hop from the available candidates in the RIB and install that single path into the FIB. In a default state, even if the show route output displays multiple next-hops for a destination like 172.24.0.0/24, only one would have the active route symbol (
>) and only that one would appear in the forwarding table.
In the provided exhibit, the show route output shows two next-hops for 172.24.0.0/24, but only the first one (172.20.0.2) is marked with the>symbol as the active selection. However, the subsequent show route forwarding-table output reveals thatboth next-hops(172.20.0.2 and 172.20.1.2) are currently present in the forwarding table for that same destination. This discrepancy indicates that thedefault load-balancing behavior has been modified (Option B). This modification is typically achieved by creating a routing policy with the action then load-balance per-packet (which actually results in flow-based load balancing) and applying it to the forwarding table via the export statement under [edit routing-options forwarding-table].
Because the forwarding table now contains both next-hops, the router is no longer restricted to a single path.
Therefore, therouter will choose both next-hops in the routing table (Option D)for packet forwarding, distributing flows across the two available Gigabit Ethernet interfaces (ge-0/0/2.0 and ge-0/0/3.0). This ensures higher utilized bandwidth and provides redundancy at the data plane level.
NEW QUESTION # 136
Referring to the exhibit. Which two statements are correct about the information shown in the exhibit? (Choose two.)
Answer: B,D
Explanation:
The exhibit shows the output of the command show spanning-tree bridge, which provides information about the spanning tree status of the switch. From the output, we can see that the switch has a bridge ID different from the root ID, which implies that this switch is not the root bridge. The "Topology change initiator" field shows ge-0/0/14, which indicates that the last topology change occurred on this interface, and this is also the interface used to reach the root bridge.
NEW QUESTION # 137
Which two steps are required to enable MPLS on a physical interface in Junos? (Choose two.)
Answer: B,D
Explanation:
To enable MPLS on a physical interface in Junos, the family mpls statement must be added to the interface configuration. Additionally, the interface itself must be specified under the protocols mpls section of the configuration.
NEW QUESTION # 138
Which two statements are correct about the behavior of IS-IS metrics? (Choose two.)
Answer: A,C
Explanation:
Wide metrics in IS-IS allow for a larger metric value than what is available with narrow metrics, which supports a maximum of 63. Wide metrics also enable an interface to advertise different metrics for Level 1 and Level 2, allowing for more flexible routing policies and greater scalability in large networks.
NEW QUESTION # 139
......
Checking our JN0-364 free demo is a great way of learning the pattern of exam materials and if it suits what you wanted. There are valid JN0-364 test questions and accurate answers along with the professional explanations in our study guide. All real questions just need to practice one or two days and remember the answers will save you much time in JN0-364 Real Exam. Come and join us.
New JN0-364 Exam Pattern: https://www.vcedumps.com/JN0-364-examcollection.html
2026 Latest VCEDumps JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1NvQmGW49iBi5oaQ0P1hZWbDyPvjX0Dk4