Our passing rate is 99% and our product boosts high hit rate. Our NSEI_OTS_AR-7.6 test torrents are compiled by professionals and the answers and the questions we provide are based on the real exam. The content of our NSEI_OTS_AR-7.6 exam questions is simple to be understood and mastered. To let you get well preparation for the exam, our software provides the function to stimulate the real exam and the timing function to help you adjust the speed. Based on those merits of our NSEI_OTS_AR-7.6 Guide Torrent you can pass the exam with high possibility.
| Section | Objectives |
|---|---|
| Topic 1: Asset Management | - Implement device detection on FortiGate and FortiNAC - Explain OT standards and Fortinet compliance - Use Fortinet Security Fabric for an OT network |
| Topic 2: Monitoring and Risk Assessment | - Perform risk assessment and management - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers |
| Topic 3: Network Access Control | - Configure network access authentication - Explain OT Ethernet concepts - Configure network segmentation schemas |
| Topic 4: Network Security | - Configure security inspections for industrial protocols - Configure virtual patching - Configure automation |
>> Real NSEI_OTS_AR-7.6 Dumps <<
We will provide you with three different versions of our NSEI_OTS_AR-7.6 exam questions. The PDF version allows you to download our NSEI_OTS_AR-7.6 quiz prep. After you download the PDF version of our learning material, you can print it out. In this way, you can learn our NSEI_OTS_AR-7.6 quiz prep on paper. We believe that it will be more convenient for you to take notes. Our website is a very safe and regular platform. You can download our NSEI_OTS_AR-7.6 Exam Guide with assurance. You can take full advantage of the fragmented time to learn, and eventually pass the authorization of NSEI_OTS_AR-7.6 exam.
NEW QUESTION # 46
Refer to the exhibit.
A partial OT network is shown. You have encountered many disconnections in the links and want to improve the availability of this network. Which action can you perform? (Choose one answer)
Answer: A
Explanation:
The correct answer is C. You can implement parallel redundancy protocol . The study guide explains that media redundancy involves creating a backup path that can be used when part of the network fails and specifically states that "Parallel Redundancy Protocol (PRP) can be used for a star topology." Since the problem described is many disconnections in the links , the issue is link availability, which is a media redundancy problem rather than a firewall virtualization or policy separation problem. PRP is designed to provide a backup communication path with low recovery time when links fail.
The other options do not fit this scenario as well. HA clusters are described in the guide as a solution for network node redundancy , where a backup firewall or switch takes over when the primary device fails. SD- WAN is recommended for remote site access across multiple WAN links, not for the local floor links shown in this topology. VDOMs provide logical segmentation, not link redundancy or higher link availability.
Because the question is specifically about repeated link disconnections , the best action is to implement PRP .
NEW QUESTION # 47
Refer to the exhibit.
A partial OT network is shown. You have configured the FortiGate device with VLANs to segment the OT network. The supervisor now wants to connect to the PLC from the Engineering Workstation. How can you allow access from the Engineering Workstation to the PLC? (Choose one answer)
Answer: A
Explanation:
The correct answer is D. You must configure a layer 3 switch .
The study guide explains that "Layer 2 devices can add or remove tags" but "cannot modify them." It then states that "A layer 3 device, such as a router or FortiGate, can modify the VLAN tag before routing the packet. This allows them to route traffic between VLANs." It also explicitly describes
"Router on a Stick" as "a way to allow routing between VLANs." Since the exhibit shows a layer-2 switch and the Engineering Workstation and PLC are placed in different VLANs, inter-VLAN communication requires layer-3 routing.
The other options do not solve this requirement. intra-switch-policy explicit/implicit applies to a software switch , where member interfaces are in the same broadcast domain and same subnet, not to routing between separate VLANs. forward domain IDs are used in transparent mode to confine broadcasts to specific broadcast domains; they do not provide inter-VLAN access. Therefore, to let the Engineering Workstation in one VLAN reach the PLC in another VLAN, you need a layer 3 routing function , which matches option D .
NEW QUESTION # 48
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
NEW QUESTION # 49
Refer to the exhibit.
A partial OT network is shown.
The OT network is divided into two main networks with a FortiGate device operating in NAT mode.
How can you further segment network 1 from network 2?
Answer: B
Explanation:
The correct answer is C . Fortinet VDOMs partition a physical FortiGate into multiple logical FortiGate devices, with each VDOM maintaining independent security policies, routing tables, and other configurations.
Traffic is confined to its VDOM unless explicit inter-VDOM connectivity is configured. Because the exhibit specifies that FortiGate operates in NAT mode , separate traffic VDOMs are the appropriate method for creating independent security domains for network 1 and network 2. Forward-domain IDs apply specifically to FortiGate operating in transparent mode , where interfaces otherwise share a broadcast domain, so option D does not fit this topology. An implicit software switch places interfaces in the same layer-2 broadcast domain rather than creating stronger separation. Universal ZTNA controls user access to applications and is not a replacement for structural network segmentation. Therefore, two traffic VDOMs provide the required separation.
NEW QUESTION # 50
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 51
......
We would like to benefit our customers from different countries who decide to choose our NSEI_OTS_AR-7.6 study guide in the long run, so we cooperation with the leading experts in the field to renew and update our NSEI_OTS_AR-7.6 study materials. Our leading experts aim to provide you the newest information in this field in order to help you to keep pace with the times and fill your knowledge gap. We can assure you that you will get the latest version of our NSEI_OTS_AR-7.6 Training Materials for free from our company in the whole year after payment.
Test NSEI_OTS_AR-7.6 Collection: https://www.2pass4sure.com/Fortinet-Network-Security-Expert/NSEI_OTS_AR-7.6-actual-exam-braindumps.html