NSE6_SDW_AD-7.6 Valid Exam Materials - First-grade Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Practice Exam

BONUS!!! Download part of Pass4cram NSE6_SDW_AD-7.6 dumps for free: https://drive.google.com/open?id=1C9EFRS2yJQW5sfSEBvpIMMC9Bvzppgwv

Our company provides three different versions to choice for our customers. The software version of our NSE6_SDW_AD-7.6 exam question has a special function that this version can simulate test-taking conditions for customers. If you feel very nervous about exam, we think it is very necessary for you to use the software version of our NSE6_SDW_AD-7.6 Guide Torrent. By simulating actual test-taking conditions, we believe that you will relieve your nervousness before examination. So hurry to buy our NSE6_SDW_AD-7.6 test questions, it will be very helpful for you to pass your NSE6_SDW_AD-7.6 exam and get your certification.

Fortinet NSE6_SDW_AD-7.6 Exam Syllabus Topics:

Section	Objectives
SD-WAN Planning and Design	- SD-WAN configuration 1. Configure SD-WAN health checks 2. Configure SD-WAN members and zones 3. Configure SD-WAN rules
SD-WAN Concepts	- SD-WAN basics 1. Identify the components of the Fortinet SD-WAN solution 2. Describe how SD-WAN works
SD-WAN Operation	- SD-WAN traffic steering 1. Configure dynamic and static routing for SD-WAN 2. Describe how traffic is steered - SD-WAN troubleshooting 1. Troubleshoot SD-WAN issues 2. Use the SD-WAN monitor dashboard

Section

Objectives

SD-WAN Planning and Design

- SD-WAN configuration

1. Configure SD-WAN health checks
2. Configure SD-WAN members and zones
3. Configure SD-WAN rules

SD-WAN Concepts

- SD-WAN basics

1. Identify the components of the Fortinet SD-WAN solution
2. Describe how SD-WAN works

SD-WAN Operation

- SD-WAN traffic steering

1. Configure dynamic and static routing for SD-WAN
2. Describe how traffic is steered

- SD-WAN troubleshooting

1. Troubleshoot SD-WAN issues
2. Use the SD-WAN monitor dashboard

>> NSE6_SDW_AD-7.6 Valid Exam Materials <<

NSE6_SDW_AD-7.6 Practice Exam | NSE6_SDW_AD-7.6 Key Concepts

You may previously think preparing for the NSE6_SDW_AD-7.6 practice exam will be full of agony; actually, you can abandon the time-consuming thought from now on. Our NSE6_SDW_AD-7.6 exam question can be obtained within 5 minutes after your purchase and full of high quality points for your references, and also remedy your previous faults and wrong thinking of knowledge needed in this exam. As a result, many customers get manifest improvement and lighten their load by using our NSE6_SDW_AD-7.6 Latest Dumps. You won’t regret your decision of choosing us. In contrast, they will inspire your potential. Besides, when conceive and design our NSE6_SDW_AD-7.6 exam questions at the first beginning, we target the aim customers like you, a group of exam candidates preparing for the exam.

Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator Sample Questions (Q81-Q86):

NEW QUESTION # 81
Exhibit.

Two hub-and-spoke groups are connected through redundant site-to-site IPsec VPNs between Hub 1 and Hub
2
Which two configuration settings are required for the spoke A1 to establish an ADVPN shortcut with the spoke B2? (Choose two.)

A. On hubs, auto-discovery-forwarder must be enabled on the IPsec VPNs to hubs.
B. On hubs, auto-diacovery-sender must be enabled on the IPsec VPNs to spokes
C. On hubs, auto-discovery-forwarder must be enabled on the IPsec VPNs to spokes.
D. On hubs, auto-discovery-receiver must be enabled on the IPsec VPNs to spokes.

Answer: A,B

Explanation:
To allow spokes in different hub-and-spoke groups to establish ADVPN shortcuts, the hubs must be configured to forward and send ADVPN shortcut offers. The key required settings on the hub are auto- discovery-forwarder (for VPNs to hubs) and auto-discovery-sender (for VPNs to spokes). This ensures the hub can facilitate and advertise ADVPN shortcut offers between spokes.
References:
[FCSS_SDW_AR-7.4 1-0.docx Q1]
Fortinet SD-WAN 7.4 ADVPN Guide (Auto-discovery settings for hub-and-spoke topologies)

NEW QUESTION # 82
Which three factors about service-level agreement (SLA) targets and SD-WAN rules should you consider when configuring SD-WAN rules? (Choose three.)

A. Member metrics are measured when an SLA target references them.
B. Best performance SD-WAN rules cannot use SLA targets.
C. SLA targets are used by only SD-WAN rules that are configured with a lowest cost (SLA) strategy.
D. When configuring an SD-WAN rule, you can select only one SLA target.
E. When configuring an SD-WAN rule, you can select multiple SLA targets from the same performance SLA.

Answer: A,C,E

Explanation:
Multiple SLA targets can be associated with a single SD-WAN rule, allowing flexible matching and decision-making based on more than one performance condition. Member metrics are actively monitored when they are referenced by an SLA target, as they are used to evaluate link quality and determine path selection. SLA targets are specifically used by SD-WAN rules that rely on SLA-based (lowest cost) strategies, where traffic is steered according to performance thresholds rather than static or priority-based selection methods.

NEW QUESTION # 83
When you configure FortiGate for SD-WAN, what is the impact when you assign a priority to the SD-WAN members?

A. It is used by SD-WAN rules that allow load balancing to determine the proportion of traffic steered to each link.
B. It is used by the SD-WAN rules configured with the lowest cost strategy to select between members with similar performances.
C. It is used by the SD-WAN rules configured with the manual strategy to determine the preferred member when all are alive.
D. It is used to prioritize one static route over another in the case of ECMP routes.

Answer: D

Explanation:
SD-WAN priority acts similarly to static route priority. It is used to assign an order of preference among SD-WAN members and affects routing decisions including static routes under ECMP scenarios.

NEW QUESTION # 84
Exhibit.

The administrator configured the IPsec tunnel VPN1 on a FortiGate device with the parameters shown in exhibit.
Based on the configuration, which three conclusions can you draw about the characteristics and requirements of the VPN tunnel? (Choose three.)

A. The administrator must manually assign the tunnel interface IP address on the hub side
B. The remote end must support IKEv2.
C. The tunnel interface IP address on the spoke side is provided by the hub.
D. This configuration allows user-defined overlay IP addresses.
E. The remote end can be a third-party IPsec device.

Answer: A,B,D

NEW QUESTION # 85
An administrator is configuring SD-WAN to load balance their network traffic. Which two things should they consider when setting up SD-WAN? (Choose two.)

A. Only the manual and best-quality strategies allow SD-WAN load balancing.
B. SD-WAN load balancing is possible only using the best quality and lowest cost (SLA) strategies.
C. You can select the outbandwidth hash mode with all strategies that allow load balancing.
D. When applicable. FortiGate load balances the traffic through all members that meet the SLA target.

Answer: C,D

NEW QUESTION # 86
......

Those who want to prepare for the IT certification exam are helpless. But they have to do it. So they have restless state of mind. However, With Pass4cram Fortinet NSE6_SDW_AD-7.6 Exam Training materials, the kind of mentality will disappear. With Pass4cram's Fortinet NSE6_SDW_AD-7.6 exam training materials, you can be brimming with confidence, and do not need to worry the exam. Of course, you can also face the exam with ease. This is not only psychological help, but more importantly, it allows you to pass the exam and to help you get a better tomorrow.

NSE6_SDW_AD-7.6 Practice Exam: https://www.pass4cram.com/NSE6_SDW_AD-7.6_free-download.html

DOWNLOAD the newest Pass4cram NSE6_SDW_AD-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1C9EFRS2yJQW5sfSEBvpIMMC9Bvzppgwv