Under the leadership of a professional team, we have created the most efficient learning NSE6_FNC_AD-7.6 training guide for our users. Our users use their achievements to prove that we can get the most practical knowledge in the shortest time. NSE6_FNC_AD-7.6 exam questions are tested by many users and you can rest assured. If you want to spend the least time to achieve your goals, NSE6_FNC_AD-7.6 Learning Materials are definitely your best choice. You can really try it we will never let you down!
| Section | Objectives |
|---|---|
| Topic 1: Network Visibility and Monitoring | - Use logging options available on FortiNAC - Troubleshoot network devices and device status - Guests and contractors - Explain and configure device profiling |
| Topic 2: Integration | - Integrate with third-party devices using Syslog and SNMP trap input - Configure and use FortiNAC-F Manager - Explain and configure MDM integration |
| Topic 3: Concepts and Initial Configuration | - Model and organize infrastructure devices - Explain isolation networks and the configuration wizard |
| Topic 4: Deployment and Provisioning | - Configure security automation - Configure access control on FortiNAC-F - Configure and monitor high availability (HA) - Configure FortiNAC-F security policies |
>> NSE6_FNC_AD-7.6 Test Lab Questions <<
Are you struggling to prepare Fortinet certification NSE6_FNC_AD-7.6 exam? Do you want to achieve the goal of passing Fortinet certification NSE6_FNC_AD-7.6 exam as soon as possible? You can choose the training materials provided by TrainingQuiz. If you choose TrainingQuiz, passing Fortinet Certification NSE6_FNC_AD-7.6 Exam is no longer a dream.
NEW QUESTION # 78
What must an administrator configure to allow FortiNAC-F to process incoming syslog messages that are not supported by default?
Answer: D
Explanation:
FortiNAC-F provides a robust engine for processing security notifications from third-party devices. For standard integrations, such as FortiGate or Check Point, the system comes pre-loaded with templates to interpret incoming data. However, when an administrator needs FortiNAC-F to process syslog messages from a vendor or device that is not supported by default, they must configure aSecurity Event Parser.
TheSecurity Event Parseracts as the translation layer. It uses regular expressions (Regex) or specific field mappings to identify key data points within a raw syslog string, such as the source IP address, the threat type, and the severity. Without a parser, FortiNAC-F may receive the syslog message but will be unable to " understand " its contents, meaning it cannot generate the necessarySecurity Eventrequired to trigger automated responses. Once a parser is created, the system can extract the host ' s IP address from the message, resolve it to a MAC address via L3 polling, and then apply the appropriate security rules. This allows for the integration of any security appliance capable of sending RFC-compliant syslog messages.
" FortiNAC parses the information based onpre-defined security event parsersstored in FortiNAC ' s database... If the incoming message format is not recognized, a newSecurity Event Parsermust be created to define how the system should extract data fields from the raw syslog message. This enables FortiNAC to generate a security event and take action based on the alarm configuration. " -FortiNAC-F Administration Guide: Security Event Parsers.
NEW QUESTION # 79
Refer to the exhibit. An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn't working.
What is the problem with the configuration?
Answer: C
Explanation:
In a FortiNAC-F deployment, the configuration of the DHCP scope for isolation networks (Registration, Remediation, etc.) must perfectly align with the underlying network infrastructure to ensure that isolated hosts can communicate with the FortiNAC appliance. In the provided exhibits, there is a clear discrepancy between the DHCP configuration and the Network Topology.
As shown in the "Network Topology" exhibit, the Registration Network resides on a router interface (or sub-interface) with the IP address 192.168.180.1. This address represents the default gateway for any host placed into the Registration VLAN. However, the "DHCP configuration" exhibit shows the scope "REG-ScopeOne" configured with a Gateway of
10.0.1.254. This 10.0.1.254 address belongs to the management/service network (port2 of FortiNAC), not the registration subnet. If a host in the Registration VLAN receives this incorrect gateway via DHCP, it will attempt to send all off-link traffic to an unreachable IP, preventing it from loading the Captive Portal or communicating with the FortiNAC server.
According to the FortiNAC-F Configuration Wizard Reference, when defining a Layer 3 network scope, the "Gateway" field must contain the IP address of the router interface that acts as the gateway for that specific isolation VLAN. The FortiNAC appliance itself usually sits on a different subnet, and traffic is directed to it via the router's DHCP Relay (IP Helper) and DNS redirection.
"When configuring scopes for a Layer 3 network, the Gateway value must be the IP address of the router interface for that subnet. This allows the host to reach its local gateway to route traffic.
If the gateway is misconfigured, the host will be unable to reach the FortiNAC eth1/port2 interface for registration... Ensure the Gateway matches the network topology for the isolation VLAN."
NEW QUESTION # 80
An organization has FortiNAC-F deployed and is using Layer 3 isolation networks across multiple sites with firewalls. At a minimum, which three protocols must be allowed between the isolation networks and FortiNAC-F? (Choose three.)
Answer: B,C,D
Explanation:
The correct answers are C, D, and E . In a Layer 3 captive or isolation network design, FortiNAC-F port2 acts as the captive network service interface. The study guide states that Layer 3 captive networks require DHCP traffic to be relayed to port2 from the captive networks, and that the FortiNAC-F interface provides DHCP, DNS, and captive portal services to hosts assigned to any captive network.
That means the firewall path between the isolation VLANs and FortiNAC-F must allow DHCP , so isolated endpoints can receive an IP address from the FortiNAC-F captive network scope; DNS , so the isolated endpoint uses FortiNAC-F as its DNS server and gets redirected correctly; and HTTP/HTTPS , so the endpoint can load the FortiNAC-F captive portal page. The guide's browser-redirection flow confirms this sequence: the host is moved to the isolation VLAN, requests DHCP, receives FortiNAC-F as the DNS server, performs DNS lookup, and then Apache/Tomcat services present the portal content.
Option A , DDNS, is not required for captive portal operation. Option B , NTP, may be useful for endpoint time accuracy or certificate-related workflows, but it is not part of the minimum traffic required for FortiNAC- F isolation network operation.
NEW QUESTION # 81
An administrator wants to continually monitor endpoints for the existence of a specific registry key and the status of a required security service. Which two requirements must be in place for the administrator to use FortiNAC-F compliance monitors? (Choose two.)
Answer: B,D
Explanation:
The correct answers are B and C . FortiNAC-F must have a persistent agent on the endpoint if the goal is continual or background endpoint monitoring. The study guide states that the persistent agent is an install-and- stay resident agent and that, after deployment, it communicates back to FortiNAC-F every 15 minutes. It also performs scheduled scans in the background without normal user interaction unless the scan fails. That is the agent model required for continuous compliance monitoring, not a one-time captive portal scan.
A custom scan is also required because the administrator wants to check very specific endpoint conditions: a registry key and a security service. The FortiNAC-F study guide lists Windows custom scan types including Registry Keys and Service , which directly match the two conditions in the question.
Option A is wrong because MDM integration is used to synchronize mobile device data, retrieve MDM- known hosts, receive MDM host updates, and apply policies based on MDM attributes; it is not the required mechanism for checking Windows registry keys or Windows service status. Option D is wrong because a remediation admin scan is not what defines the compliance check itself. The compliance logic must be created as a custom scan, and continuous monitoring requires the persistent agent.
NEW QUESTION # 82
Refer to the exhibit.
An administrator wants to use FortiNAC-F to automatically provision printers throughout their organization.
Each building uses its own local VLAN for printers.
Which FortiNAC-F feature would allow this to be accomplished with a single network access policy?
Answer: A
Explanation:
The FortiNAC-FLogical Networkfeature is specifically designed to provide an abstraction layer between high- level security policies and the underlying physical network infrastructure. In large-scale deployments where different physical locations (like Building 1, 2, and 3 in the exhibit) use different local VLAN IDs for the same type of device (e.g., VLAN 10, 20, and 30 for printers), managing separate policies for each building would create significant administrative overhead.
By using aLogical Network, an administrator can create a single entity-for example, a logical network named " Printers " -and use it as the " Access Value " in a singleNetwork Access Policy. The mapping of this logical label to a specific physical VLAN occurs at theModel Configurationlevel for each network device.
When a printer connects to a switch in Building 1, FortiNAC-F evaluates the policy, identifies that the printer should be in the " Printers " logical network, and checks the Model Configuration for that specific switch to see which VLAN ID is mapped to that label (VLAN 10). If the same printer moves to Building 3, the same single policy applies, but FortiNAC-F provisions it to VLAN 30 based on the local mapping for that building ' s switch.
This architectural approach ensures that policies remain consistent and easy to manage regardless of the complexity or variations in the local network topology.
" Logical Networks provide a way to define a network access requirement once and apply it across many different network devices that may use different VLAN IDs for that access... Each managed device can usedifferent VLAN IDs for the same Logical Network label. You can define the Logical Networks based on requirements and then associate the network to a VLAN ID when the managed device is configured in theModel Configuration. " -FortiNAC-F IoT Deployment Guide: Define the Logical Networks.
NEW QUESTION # 83
......
As is known to us, the NSE6_FNC_AD-7.6 certification has been increasingly important for a lot of modern people in the rapid development world. Why is the NSE6_FNC_AD-7.6 certification so significant for many people? Because having the certification can help people make their dreams come true, including have a better job, gain more wealth, have a higher social position and so on. Many people are difficult in getting the NSE6_FNC_AD-7.6 Certification successfully. If you also have trouble in passing your exam and getting your certification, we think it is time for you to use our NSE6_FNC_AD-7.6 quiz prep.
NSE6_FNC_AD-7.6 Exam Questions And Answers: https://www.trainingquiz.com/NSE6_FNC_AD-7.6-practice-quiz.html