HPE7-A01인기시험 - HPE7-A01시험패스가능한공부하기

참고: ExamPassdump에서 Google Drive로 공유하는 무료, 최신 HPE7-A01 시험 문제집이 있습니다: https://drive.google.com/open?id=1zQI6MOr7Ssv61tqbXcHPbtv3XPjE_505

ExamPassdump는 고객님께서 첫번째HP HPE7-A01시험에서 패스할수 있도록 최선을 다하고 있습니다. 만일 어떤 이유로 인해 고객이 첫 번째 시도에서 실패를 한다면, ExamPassdump는 고객에게HP HPE7-A01덤프비용 전액을 환불 해드립니다.환불보상은 다음의 필수적인 정보들을 전제로 합니다.

HP HPE7-A01 (Aruba Certified Campus Access Professional) 시험은 Aruba 무선 네트워크를 구현하고 관리하는 지식과 기술을 입증하고자 하는 개인들을 위해 설계된 인증 시험입니다. 이 시험은 기업 환경에서 Aruba 무선 LAN 기술과 솔루션을 다루는 IT 전문가들을 대상으로 합니다. 이 인증은 후보자가 캠퍼스 환경에서 Aruba 무선 네트워크를 설계, 구현 및 관리하는 능력을 보유하고 있다는 것을 검증합니다.

HPE7-A01 시험은 Aruba Access 솔루션에 대한 전문 지식을 보여주는 업계 인식 인증입니다. 엔터프라이즈 레벨 무선 네트워크 설계, 배포 및 관리를 담당하는 네트워크 엔지니어, 관리자 및 컨설턴트를 위해 설계되었습니다. 인증은 후보자의 Aruba 무선 네트워크를 구성하고 문제 해결하는 능력과 최신 업계 표준 및 모범 사례에 대한 이해를 검증합니다. Aruba Certified Campus Access Professional 인증을 취득하면 IT 전문가의 경력 전망을 향상시키고 오늘날의 빠르게 진행되는 IT 환경에서 성공하는 데 필요한 지식과 기술을 제공 할 수 있습니다.

>> HPE7-A01인기시험 <<

최신 Aruba Certified Professional HPE7-A01 무료샘플문제 (Q43-Q48):

질문 # 43
When configuring UBT on a switch what will happen when a gateway role is not specified?

A. The gateway will assign a default role to the client
B. The switch will assign the default deny role to the client.
C. The gateway will send back the deny role to the client.
D. The switch will put the client on the access VLAN

정답：D

설명：
According to the Aruba Documentation Portal 1 , user-based tunneling (UBT) is a feature that uses GRE to tunnel ingress traffic on a switch interface to a gateway for further processing. UBT enables a switch to provide a centralized security policy, using per-user authentication and access control to ensure consistent access and permissions.
Option A: The switch will put the client on the access VLAN
This is because option A shows how UBT works on an Aruba switch. When a device connects to the network, it is authenticated using either MAC Authentication or 802.1X and triggers an enforcement policy from ClearPass, which contains an enforcement profile with a user role configuration. The user role can be assigned locally on the switch or on ClearPass as part of an enforcement profile. The user role determines the VLAN that the device belongs to and the access policies that apply to it 2 3 .
Therefore, option A is correct.
1 : https://www.arubanetworks.com/techdocs/central/latest/content/nms/aos-cx/cfg/conf-cx-ubt.htm 2 :
https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7696/GUID-581D2976-694B-46C7-8497-F6B788AA05B2.html 3 : https://community.arubanetworks.com/viewdocument/?
DocumentKey=c740df4e-3e26-4cc5-9126-355a18709c44 & CommunityKey=2fd943a6-8898-4dbe-915f-
4f09e4d3c317 & tab=librarydocuments

질문 # 44
Which component is used by the Aruba Network Analytics Engine (NAE)?

A. Current State Database
B. Ruby-based scripts
C. JSON-based scripts
D. Lisp-based agents

정답：C

설명：
JSON-based scripts are the components used by the Aruba Network Analytics Engine (NAE).
NAE is a feature that provides network monitoring and troubleshooting capabilities using JSON- based scripts called agents. Agents collect data from various sources, such as switch CLI commands, SNMP queries, REST APIs, etc., and analyze them using predefined rules and thresholds. Agents can also generate alerts, notifications, actions, or reports based on the analysis results.

질문 # 45
Your customer has four (4) Aruba 7200 Series Gateways and two (2) 7000 Series Gateways. The customer wants to form a cluster with these Gateways.
What design consideration would prevent you from using all of those Gateways?

A. A combination of 7200 series and 7000 series gateways supports up to 4 nodes
B. The AP load should be lowest value of worst-case scenario load.
C. Multiple versions between Gateways in the same cluster profile are not allowed AOS 10.x.
D. A heterogeneous cluster is not supported in AOS 10.x.

정답：D

설명：
The reason is that AOS 10.x does not support clustering gateways with different versions in the same cluster profile. A cluster profile defines the configuration settings for a group of gateways that are managed by Aruba Central.
According to the Aruba documentation2, "You can combine 7200 Series and 7000 Series gateways in the same cluster with a maximum size of four devices with reduced AP client capacity on 7000 Series gateways."

질문 # 46
you need to have different routing-table requirements With Aruba CX 6300 VSF configuration.
Assuming the correct layer-2 VLAN already exists, how would you create a new SVI for a separate routing table?

A. Create a new routing table, and attach VLANS to it
B. create a new VLAN, and attach the VRF to it.
C. Create a new SVI and use attach command.
D. Create a new VLAN. and attach the routing table to it

정답：C

설명：
The correct answer is C. Create a new SVI and use attach command.
To create a new SVI for a separate routing table, you need to use the attach command to associate the SVI with a VRF (Virtual Routing and Forwarding) instance. A VRF is a logical entity that allows multiple routing tables to coexist on the same switch. Each VRF has its own set of interfaces, routing protocols, and routes that are isolated from other VRFs.
According to the AOS-CX Virtual Switching Framework (VSF) Guide1, one of the steps to configure VRF-aware VSF is:
* Configure the VRFs on each member switch and assign the SVIs to the respective VRFs using the attach command. For example:
switch(config)# vrf red
switch(config-vrf)# exit
switch(config)# interface vlan 10
switch(config-if-vlan)# ip address 10.1.1.1/24
switch(config-if-vlan)# attach vrf red
The above commands create a VRF named red and assign VLAN 10 SVI to it. The SVI has an IP address of
10.1.1.1/24.
The other options are incorrect because:
* A. You cannot attach a VRF to a VLAN directly. You need to create an SVI for the VLAN and then attach the VRF to the SVI.
* B. You cannot create a new routing table manually. You need to create a VRF and then use routing protocols or static routes to populate the routing table for the VRF.
* D. You cannot attach a routing table to a VLAN directly. You need to create an SVI for the VLAN and then attach a VRF that has a routing table associated with it.

질문 # 47
What is an Aruba-recommended best practice for hardening that only applies to Aruba CX 6300 series switches with dedicated management ports?

A. Manually enable Enhanced Security Mode from a console session.
B. Implement a control plane ACL to limit access to approved IPs and/or subnets
C. Create a dedicated management VRF, and assign the management port to it.
D. Disable all management services on the default VRF.

정답：C

설명：
This is an Aruba-recommended best practice for hardening that only applies to Aruba CX 6300 series switches with dedicated management ports. A dedicated management port is a physical port that is used exclusively for out-of-band management access to the switch. A dedicated management VRF is a virtual routing and forwarding instance that isolates the management traffic from other traffic on the switch. By creating a dedicated management VRF and assigning the management port to it, the administrator can enhance the security and performance of the management access to the switch. The other options are incorrect because they either do not apply to switches with dedicated management ports or do not follow Aruba-recommended best practices.
References:
https://www.arubanetworks.com/assets/ds/DS_AOS-CX.pdf
https://www.arubanetworks.com/assets/tg/TB_ArubaCX_Switching.pdf

질문 # 48
......

HPE7-A01시험패스 가능한 공부하기: https://www.exampassdump.com/HPE7-A01_valid-braindumps.html

그리고 ExamPassdump HPE7-A01 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1zQI6MOr7Ssv61tqbXcHPbtv3XPjE_505

HPE7-A01인기시험 - HPE7-A01시험패스가능한공부하기

최신 HPE7-A01인기시험 시험공부자료

최신 Aruba Certified Professional HPE7-A01 무료샘플문제 (Q43-Q48):