BONUS!!! Download part of Prep4cram EDGE-Expert dumps for free: https://drive.google.com/open?id=1zLNBM4upLh3m-uNkvuNcs0KEDN9zKyNs
It is acknowledged that there are numerous EDGE-Expert learning questions for candidates for the exam, however, it is impossible for you to summarize all of the key points in so many materials by yourself. But since you have clicked into this website for EDGE-Expert practice materials you need not to worry about that at all because our company is especially here for you to solve this problem. We have a lot of regular customers for a long-term cooperation now since they have understood how useful and effective our EDGE-Expert Actual Exam is. To let you have a general idea about the shining points of our training materials I would like to list three of the advantages of our training for you.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: EDGE System Overview | 15% | - Building Types & Applicability
|
| Topic 2: Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
| Topic 3: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Topic 4: Software & Methodology | 25% | - EDGE Software Interface
|
| Topic 5: Energy Efficiency | 25% | - Lighting & Hot Water
|
>> Exam EDGE-Expert Vce Format <<
Who don't want to be more successful and lead a better life? But it's not easy to become better. Our EDGE-Expert exam questions can give you some help. After using our EDGE-Expert study materials, you can pass the exam faster and you can also prove your strength. Of course, our EDGE-Expert Practice Braindumps can bring you more than that. You can free download the demos to take a look at the advantages of our EDGE-Expert training guide.
NEW QUESTION # 44
Which type of evidence is required at the post-construction stage for the efficiency measure window glazing?
Answer: B
Explanation:
The post-construction stage in EDGE certification requires evidence to confirm that the efficiency measures claimed in the design stage have been implemented as specified. For window glazing, which affects energy efficiency through its U-value (thermal transmittance) and SHGC (Solar Heat Gain Coefficient), the EDGE Certification Protocol provides clear requirements: "At the post-construction stage, the Client must provide manufacturer's data sheets for the window glazing measure, showing the make and model, U-value, and SHGC of the installed glass, to confirm that the glazing matches the specifications claimed in the self- assessment and meets the energy efficiency requirements" (EDGE Certification Protocol, Section 3.4: Post- Construction Requirements). Option C, manufacturer's data sheets showing the make and model, U-value, and SHGC of the installed glass, directly matches this requirement, as it provides the specific technical data needed to verify compliance. Option A (design building elevations marking the window glass specifications) is relevant at the design stage, not post-construction: "Design elevations are required at the preliminary stage to show intended glazing specifications, not after construction" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (bill of quantities with specifications highlighted) is insufficient on its own, as it may not provide detailed technical data: "Bills of quantities may support purchase verification, but manufacturer's data sheets are required for technical specifications like U-value and SHGC" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option D (window schedule showing major glass types) is helpful but not sufficient, as it lacks the detailed technical data: "Window schedules may indicate glass types, but they do not replace the need for manufacturer's data sheets with U-value and SHGC at post-construction" (EDGE User Guide, Section 6.2: Documentation Requirements). The EDGE User Guide further clarifies: "For glazing measures, post-construction evidence must confirm the installed product's performance through manufacturer's data sheets, ensuring alignment with the design-stage claims" (EDGE User Guide, Section 4.1: Insulation Measures). Thus, manufacturer's data sheets (Option C) are required at the post-construction stage.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Section 4.1:
Insulation Measures.
NEW QUESTION # 45
Which of the following wall solar reflectivity indexes would be the most energy efficient in a hot climate?
Answer: B
Explanation:
In hot climates, reducing heat gain through building envelopes is a key strategy for energy efficiency, as emphasized in EDGE's green building design principles. The EDGE User Guide discusses solar reflectivity (measured by the Solar Reflectance Index, SRI) for walls and roofs, stating: "Higher SRI values indicate greater reflectivity, which reduces heat absorption and lowers cooling energy demand in hot climates. For walls in hot climates, an SRI of 0.7 or higher is recommended to maximize energy savings" (EDGE User Guide, Section 3.5: Passive Design Strategies). The options provided are 0.2, 0.3, 0.4, and 0.7. Since 0.7 is the highest SRI value among the choices, it reflects the most solar radiation, thereby reducing the cooling load andimproving energy efficiency in a hot climate, as per EDGE's guidance. Options A, B, and C have lower SRI values and would result in greater heat absorption, increasing energy use for cooling.
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies.
NEW QUESTION # 46
A project certificate that meets the EDGE Zero Carbon criteria fully on-site providing generation of on-site renewable electricity, will expire every
Answer: C
Explanation:
Under the CBCI EDGE curriculum, EDGE Certified and EDGE Advanced are one-time certifications and do not require renewal. EDGE Zero Carbon is treated differently because it depends on ongoing operational conditions, especially how the building's remaining operational emissions are addressed through renewable electricity and, where applicable, offsets. For this reason, EDGE Zero Carbon certificates include an expiration date and require renewal to confirm that the carbon strategy remains valid over time.
The EDGE Zero Carbon rules specify different expiration periods depending on how the project achieves the renewable electricity and emissions balance. When a project meets the EDGE Zero Carbon criteria fully on- site, including the generation of on-site renewable electricity, the certificate expires after four years. This longer validity period reflects the higher confidence and stability associated with on-site renewable generation that is physically tied to the building and less dependent on external contracts or market instruments.
By comparison, projects that rely on purchased off-site renewable electricity and or carbon offsets have a shorter certificate validity period because procurement terms and availability can change. Therefore, for a fully on-site renewable electricity EDGE Zero Carbon project, the correct expiration period is four years.
NEW QUESTION # 47
Which of the following must be included in the EDGE Auditor submission for Preliminary Certification?
Answer: A
Explanation:
The EDGE Auditor's submission for Preliminary Certification (design stage) must include specific elements to support the recommendation for certification. The EDGE Certification Protocol specifies: "For Preliminary Certification, the EDGE Auditor's submission must include compliance documents for the selected measures, such as drawings, specifications, and manufacturer's data sheets, which verify that the design aligns with the self-assessment in the EDGE software. These documents are reviewed by the Certification Provider to confirm eligibility" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, compliance documents for selected measures, directly matches this requirement. Option A (all available design data) is too broad and not required: "Only documents directly related to the selected measures are needed, not all design data" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option B (Chapter 5 EDGE certification protocol) is incorrect, as this refers to the protocol document itself, not a submission component:
"The certification protocol is a reference, not part of the Auditor's submission" (EDGE Certification Protocol, Section 1.1: Overview). Option D (design audit site visit results) is incorrect, as site visits are not required at the design stage: "Preliminary Certification is based on a desk audit, not a site visit, which occurs at the post- construction stage" (EDGE Certification Protocol, Section 3.3: Certification Decision). Thus, compliance documents (Option C) are required in the submission.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.3: Certification Decision, Section 1.1: Overview.
NEW QUESTION # 48
An EDGE Auditor is auditing a hospital design for Preliminary Certification. The EDGE Client has included photovoltaics as one of the energy measures resulting in an overall 21% saving in energy. The Auditor observes the photovoltaics are facing the wrong direction. What action should the Auditor take?
Answer: C
Explanation:
The role of an EDGE Auditor is to verify the project's self-assessment as submitted, not to modify or redesign the project. The EDGE Expert and Auditor Protocols clearly define the Auditor's responsibilities: "During an audit, the EDGE Auditor must assess the energy measures as presented in the self-assessment, without altering the design or selections made by the Client. If discrepancies are found, such as incorrect orientation of photovoltaics, the Auditor should note the issue in the audit report but proceed with the assessment as submitted, allowing the Certification Provider to make the final decision" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option C, assess the energy measures as they are presented without changing the photovoltaic selection, aligns with this protocol. Option A (contact the design team and suggest a better orientation) oversteps the Auditor's role, as they are not to provide design advice: "Auditors must not engage in design consultancy during an audit to avoid conflicts of interest" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option B (adjust the area of photovoltaic panels) involves modifying the assessment, which is prohibited: "Auditors cannot modify the Client's self-assessment; they must evaluate it as submitted" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (reject photovoltaics and notify the Client) is also incorrect, as Auditors do not have the authority to reject measures outright: "Rejection of measures is the responsibility of the Certification Provider, not the Auditor" (EDGE Certification Protocol, Section 3.3: CertificationDecision). Thus, the Auditor should assess as presented (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.3: Certification Decision.
NEW QUESTION # 49
......
Students are worried about whether the EDGE-Expert practice materials they have purchased can help them pass the exam and obtain a certificate. They often encounter situations in which the materials do not match the contents of the exam that make them waste a lot of time and effort. But with EDGE-Expert exam dump, you do not need to worry about similar problems. Because our study material is prepared strictly according to the exam outline by industry experts, whose purpose is to help students pass the exam smoothly. As the authoritative provider of EDGE-Expert Test Guide, we always pursue high passing rates compared with our peers to gain more attention from potential customers.
Test EDGE-Expert Guide: https://www.prep4cram.com/EDGE-Expert_exam-questions.html
What's more, part of that Prep4cram EDGE-Expert dumps now are free: https://drive.google.com/open?id=1zLNBM4upLh3m-uNkvuNcs0KEDN9zKyNs