SRAN-Radio-Network-Performance-Optimization Trainingsunterlagen & SRAN-Radio-Network-Performance-Optimization Buch

Nun ist eine Gesellschaft, die mit den fähigen Leuten überschwemmt. Aber viele Fachleute fehlen trotzdem doch. Beispielsweise fehlen in der IT-Branche Techniker. Und die Nokia SRAN-Radio-Network-Performance-Optimization Zertifizierungsprüfung sit eine Prüfung, die IT-Technik testet. PrüfungFrage ist eine Website, die Ihnen Kenntnise zur Nokia SRAN-Radio-Network-Performance-Optimization Zertifizierungsprüfung liefert.

Nokia SRAN-Radio-Network-Performance-Optimization Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: SRAN Performance Optimization Fundamentals25%- Network performance monitoring and analysis tools
- Key performance indicators (KPIs) definition and measurement
- Performance optimization principles and methodology
Topic 2: Advanced Optimization and SON Features10%- Self-Organizing Networks (SON) use cases and optimization
- Energy saving and advanced features
Topic 3: Coverage and Capacity Optimization30%- Capacity planning, load balancing and optimization
- Coverage analysis, tuning and optimization
- Interference analysis and mitigation techniques
Topic 4: Mobility and Handover Optimization20%- Handover parameters and algorithms
- Inter-RAT mobility and optimization
- Mobility robustness and optimization
Topic 5: Quality of Service and Resource Management15%- QoS parameters, scheduling and admission control
- Radio resource management and optimization

>> SRAN-Radio-Network-Performance-Optimization Trainingsunterlagen <<

Nokia SRAN-Radio-Network-Performance-Optimization Buch & SRAN-Radio-Network-Performance-Optimization Examengine

Ein wunderbares Leben ist es, dass man sich wagt, nach etwas zu trachten. Wenn Sie eines Tages in einem wackligen Stuhl sitzt und Ihre Vergangenheit erinnern, können Sie einfach lächeln. Das bedeutet, dass Ihr Leben erfolgreich ist. Wollen Sie ein erfolgreiches Leben führen? Dann benutzen Sie doch die Lernhilfe zur Nokia SRAN-Radio-Network-Performance-Optimization Zertifizierungsprüfung von PrüfungFrage, die Fragen und Antworten beinhalten und jedem Kandidaten sehr passen. Ihre Erfolgsquote beträgt 100%. Sie sollen PrüfungFrage so schnell wie möglich kaufen.

Nokia MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 SRAN-Radio-Network-Performance-Optimization Prüfungsfragen mit Lösungen (Q22-Q27):

22. Frage
Which statement is not true about MantaRay SON ?

Antwort: C

Begründung:
The correct answer is B .
The statement "Energy savings management is not covered" is not true . Nokia describes MantaRay SON as supporting radio network performance, quality, and energy efficiency optimization. Nokia also references AI-powered energy savings management and RAN energy efficiency use cases under its SON/MantaRay automation portfolio.
The other statements are aligned with Nokia SON/MantaRay positioning. Nokia describes MantaRay SON as an automation layer within the MantaRay SMO framework, with support for multi-supplier/non-real-time RIC functionality and an application ecosystem. Nokia also has historical EdenNet SON material, including EdenNet SON Energy Saving Management.
Therefore, the statement that is not true is:
Energy savings management is not covered.


23. Frage
In a high-mobility network, the maximum cell size must be restricted to 33 km . Which PRACH format and restricted-set type should be used?

Antwort: C

Begründung:
The correct answer is Format 1 / Type B .
For PRACH planning, the selected preamble format must support the required cell radius. Format 0 is too short for a 33 km cell because it is typically suitable only up to around 14.5 km . Format 2 is also not suitable because its practical maximum cell radius is around 29.5 km , which is below the required 33 km . Therefore, a longer PRACH format is needed.
Because the scenario mentions high mobility , an unrestricted PRACH set is not preferred. High-mobility environments require a restricted set to handle Doppler effects and reduce ambiguity in PRACH preamble detection. Between the restricted-set options, Type B is the correct choice for this 33 km high-mobility case.
A matching Nokia-style question source also lists this exact scenario with Format 1 / Type B as option A.


24. Frage
In the context of mmWave deployments , what is the primary benefit of analog beamforming ?

Antwort: B

Begründung:
The correct answer is A .
In mmWave systems, beamforming is essential because FR2 signals suffer from high path loss and blockage.
Analog beamforming uses fewer RF chains than fully digital beamforming, so it is cheaper and less complex in terms of RF hardware, power consumption, and implementation. Research and industry references explain that analog and hybrid beamforming architectures reduce the number of required ADCs/RF chains compared with fully digital beamforming, lowering cost and power complexity.
However, analog beamforming has limitations. It usually forms one beam, or a limited number of beams, at a time from a panel. Supporting multiple independent simultaneous beams and more UEs per sector is more associated with digital or hybrid beamforming, not pure analog beamforming.
Therefore, the primary benefit is:
Low cost and low complexity for coverage at higher mmWave bands.


25. Frage
Single Network Slice Selection Assistance Information , or S-NSSAI , identifies a network slice. Which of the following statements are correct regarding NSSAI ? Refer to the diagram for basic information.

Antwort: H

Begründung:
The correct answer is D: A, B, C, and D .
In 5G network slicing, S-NSSAI identifies a single network slice. It is composed of:
SST , or Slice/Service Type
SD , or Slice Differentiator
Statement A is correct.
The combination of SST + SD can uniquely identify a slice. For example, two slices may both use SST 1 for eMBB/MBB-type service, but different SD values can separate them for different enterprises, tenants, or service groups.
Statement B is correct.
SST is mandatory. It is an 8-bit numeric field that indicates the expected slice/service behavior, such as eMBB, URLLC, or mMTC.
Statement C is correct.
SD is optional. It is a 24-bit field used to differentiate multiple slices that may share the same SST.
Statement D is correct.
SST may use standardized values, such as SST 1 for eMBB, SST 2 for URLLC, and SST 3 for mMTC/MIoT.
It may also use operator-specific or non-standardized values depending on deployment requirements.


26. Frage
Which port must be opened in NetAct for the connection from TraceSynthesis to NetAct?

Antwort: D

Begründung:
The correct answer is B .
The connection from TraceSynthesis to NetAct is typically based on secure web/API communication, which uses HTTPS . The standard HTTPS port is 443 . Therefore, port 443 must be opened in NetAct/firewall rules to allow TraceSynthesis to communicate with NetAct.
The other options are not the best answer:
8443 is often used as an alternative HTTPS/application-server port, but it is not the standard answer here.
22 is used for SSH, mainly for secure shell access or file transfer.
8080 is commonly used for unsecured HTTP or proxy/application access, not the secure NetAct connection expected here.
So the required port is:
443.


27. Frage
......

Mit der Hilfe von PrüfungFrage brauchen Sie nicht so viel Geld für die Kurse oder viel Zeit und Energie für die Prüfung auszugeben. Sie können ganz einfach die Nokia SRAN-Radio-Network-Performance-Optimization (MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510)Prüfung erfolgreich ablegen. Die Software zur Nokia SRAN-Radio-Network-Performance-Optimization Zertifizierungsprüfung wird PrüfungFrage nach den echten Prüfungen in den letzten Jahren erforscht. Die Fragen und Antworten zur Nokia SRAN-Radio-Network-Performance-Optimization Zertifizierungsprüfung von PrüfungFrage sind den realen Fragen und Antworten sehr ähnlich.

SRAN-Radio-Network-Performance-Optimization Buch: https://www.pruefungfrage.de/SRAN-Radio-Network-Performance-Optimization-dumps-deutsch.html