BTW, DOWNLOAD part of ITExamSimulator 350-101 dumps from Cloud Storage: https://drive.google.com/open?id=1zGKC3QWx3e-vZk-FszjJo-vAMyfBH-Hu
All exam questions that contained in our Cisco 350-101 study engine you should know are written by our professional specialists with three versions to choose from: the PDF, the Software and the APP online. In case there are any changes happened to the Cisco 350-101 Exam, the experts keep close eyes on trends of it and compile new updates constantly.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: RF Fundamentals | 15% | - RF characteristics
|
| Topic 2: Wireless Monitoring and Management | 25% | - Monitoring and troubleshooting
|
| Topic 3: Wireless Client Connectivity | 30% | - Client access and security
|
| Topic 4: 802.11 Technology Fundamentals | 20% | - Wireless standards and operations
|
| Topic 5: Automation and AI | 10% | - Automation technologies
|
New developments in the tech sector always bring new job opportunities. These new jobs have to be filled with the Implementing and Operating Cisco Wireless Core Technologies (350-101) certification holders. So to fill the space, you need to pass the Cisco 350-101 exam. Earning the Implementing and Operating Cisco Wireless Core Technologies (350-101) certification helps you clear the obstacles you face while working in the Cisco field. To get prepared for the Implementing and Operating Cisco Wireless Core Technologies (350-101) certification exam, applicants face a lot of trouble if the study material is not updated.
NEW QUESTION # 62
What is the primary modulation technology used by 802.11ax in wireless communications?
Answer: D
Explanation:
The correct answer isorthogonal frequency-division multiple access, orOFDMA. Cisco identifies 802.11ax, also known as Wi-Fi 6, as the generation that introduces OFDMA-based operation to improve efficiency, especially in dense wireless environments. Cisco's Catalyst 9800 documentation states that OFDMA support for 802.11ax APs improves performance in dense deployments, enables simultaneous data transmissions with OFDMA and MU-MIMO, and supports uplink and downlink multi-user operations across multiple client devices.
Strictly, OFDMA is a multi-user channel-access and subcarrier allocation method rather than a pure constellation modulation scheme. However, within 802.11ax fundamentals and this answer set, OFDMA is the defining PHY/MAC technology. It divides a 20, 40, 80, or 160 MHz channel into smaller resource units so multiple clients can transmit or receive in the same transmission opportunity. Cisco further explains that OFDMA improves wireless performance by using independently modulated subcarriers within frequencies, allowing simultaneous transmissions to and from multiple clients. FHSS and DSSS belong to older 802.11 PHY generations. QAM is used for symbol modulation, but "Quadrature Amplitude Modulation OFDMA" is not the primary 802.11ax technology name. Reference topics:802.11ax/Wi-Fi 6, OFDMA, resource units, uplink/downlink multi-user operation, and high-efficiency WLAN design.
NEW QUESTION # 63
Refer to the exhibit. A network administrator is working on a WLC to enable user access for contractor desktops using WPA2-Enterprise using EAP-TTLS. The administrator verified the external authentication configuration and now must test network connectivity. Which code snippet must be added to the box in the code to complete the configuration on the WLC that supports authentication with an external server?
Answer: A
Explanation:
The missing command must create the RADIUS server group context before the existing server name external-radius command can bind the defined RADIUS server into that group. Cisco's Catalyst 9800 802.1X configuration workflow shows the exact CLI sequence: define the RADIUS server, then enter aaa group server radius <radius-grp-name>, then add server name <radius- server-name>. The Catalyst 9800 configuration guide likewise states that the RADIUS server- group identification is created with aaa group server radius server-group, followed by the server name assignment.
In this exhibit, external-radius is already declared under radius server, and aaa authentication dot1x CLIENT_GROUP group RADIUS-GRP already points the 802.1X method list to the server group named RADIUS-GRP. Therefore, the box must contain aaa group server radius RADIUS- GRP so that server name external-radius is syntactically valid and functionally associates the external server with the group. Cisco also identifies dot1x authentication lists as the AAA method type used for 802.1X SSIDs, with "group" directing authentication to an external RADIUS server.
NEW QUESTION # 64
A network engineer is deploying a new wireless monitoring solution in a large campus. The engineer must connect Cisco Spaces Connector, Cisco ISE, and a Catalyst Center appliance to the switch infrastructure. All three services require management and telemetry connectivity, and the security policy mandates segregation of management and user traffic. The engineer also must ensure that any network changes do not disrupt ongoing wireless services for users and staff. Which implementation must the engineer use on the switch interfaces?
Answer: C
Explanation:
For campus wireless monitoring deployments involving Cisco Spaces, ISE, and Catalyst Center appliances, strict separation of management traffic from user data is required to maintain security and service continuity.
The correct approach is to configure the switch interfaces connecting these appliances as access ports assigned to the dedicated management VLAN. This ensures that management and telemetry traffic is isolated from production WLAN traffic, preventing any disruption to end users if configuration changes are made.
Assigning the management VLAN as the native VLAN on trunk ports (Option B) is inappropriate because the native VLAN still transmits untagged traffic and could allow accidental bridging with user traffic, violating security policies. PortFast (Option A) is used for rapid STP convergence on end-user ports but does not enforce VLAN separation or management isolation. Port Aggregation Protocol (Option C) is intended for link bundling and redundancy, not VLAN segmentation. Cisco Wireless best practices emphasize access port configuration for management appliances in a dedicated VLAN to guarantee security, telemetry reliability, and non-disruptive network operations. Proper implementation involves assigning a unique VLAN ID for all monitoring and management devices and configuring the switch port as an access port, ensuring consistent isolation and predictable behavior in a high-density campus environment. Reference topics:Wireless Monitoring and Management - Cisco Spaces deployment, ISE integration, management VLAN isolation, switch access port configuration.
NEW QUESTION # 65
A school district is deploying Cisco Catalyst 9176 APs to remote sites with occasional WAN outages. The IT team wants the APs to attempt joining a secondary or tertiary Catalyst 9800 WLC if the primary controller is unreachable. The team must preconfigure all controller IP addresses using the AP CLI before deploying.
Which set of CLI commands sets the primary, secondary, and tertiary controller IP addresses on a Catalyst
9176 AP?
Answer: B
Explanation:
Cisco lightweight and Catalyst access points use CAPWAP for AP-to-controller discovery and join operations. For AP-side preconfiguration, Cisco documents the syntax as capwap ap {primary-base | secondary-base | tertiary-base} controller-name controller-ip-address, specifically for configuring primary, secondary, and tertiary controllers on the AP. This matches option B exactly because it includes the CAPWAP AP command, the controller priority keyword, the controller name, and the controller management IP address. (Cisco) The Catalyst 9800 AP join process also recognizes these configured controller entries in priority order:
primary controller using capwap ap primary-base, secondary controller using capwap ap secondary-base, and tertiary controller using capwap ap tertiary-base. (Cisco) This allows the AP to attempt a backup controller when the preferred controller is unavailable, which is appropriate for remote sites with intermittent WAN reachability. Option A uses obsolete or invalid setcontroller syntax. Option C invents an ap join command format. Option D incorrectly inserts wlc into the AP CAPWAP command. Reference topics:Wireless Network Implementation -CAPWAP discovery, AP join process, Catalyst 9800 controller redundancy, and AP CLI provisioning.
NEW QUESTION # 66
A medium-sized enterprise must provide wireless internet to visitors in their lobby using a Cisco
9800 WLC. The solution must meet these requirements:
- Ensure that guests cannot access the corporate LAN.
- Guests are redirected to a login page before browsing.
- The guest network must use a separate VLAN from internal users.
- Access must be limited to web browsing only.
- Guest access does not require any preshared keys or certificates.
Which two actions must be taken to achieve this solution? (Choose two.)
Answer: A,B
Explanation:
To implement a guest Wi-Fi network on a Cisco 9800 WLC with the requirements mentioned, the solution must ensure that guests are isolated from the corporate LAN and are redirected to a login page before being able to access the internet. Additionally, access needs to be restricted to web browsing only, with no need for preshared keys or certificates.
Option A: "Create a WLAN that uses a web policy and points to a consent parameter map." This is necessary to enforce the login page and redirect users to a webauth page. By creating a WLAN with web policy, you ensure that users are redirected to a captive portal where they can accept the terms and conditions or login to the network. This solution also helps in segregating the guest network from the corporate network, as users are contained within their VLAN.
Option E: "Deploy a WLAN policy that points wireless users to a webauth parameter map." Web authentication (webauth) is an essential part of guest access. Deploying a WLAN policy with webauth ensures that users are directed to the login page (a webauth parameter map), allowing them to authenticate before browsing the internet.
NEW QUESTION # 67
......
As you know, we are now facing very great competitive pressure. We need to have more strength to get what we want, and 350-101 exam dumps may give you these things. After you use our study materials, you can get 350-101 certification, which will better show your ability, among many competitors, you will be very prominent. Using 350-101 Exam Prep is an important step for you to improve your soft power. I hope that you can spend a little time understanding what our study materials have to attract customers compared to other products in the industry.
Exam 350-101 Actual Tests: https://www.itexamsimulator.com/350-101-brain-dumps.html
DOWNLOAD the newest ITExamSimulator 350-101 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1zGKC3QWx3e-vZk-FszjJo-vAMyfBH-Hu