BONUS!!! Download part of DumpsFree H12-811_V1.0 dumps for free: https://drive.google.com/open?id=1LlnrOmQIdTnqs3oKknOkq8-NUTxlmmWq
There has been fierce and intensified competition going on in the practice materials market. As the leading commodity of the exam, our H12-811_V1.0 practice materials have get pressing requirements and steady demand from exam candidates all the time. So our H12-811_V1.0 practice materials have active demands than others with high passing rate of 98 to 100 percent. We are one of the largest and the most confessional dealer of practice materials. That is why our H12-811_V1.0 practice materials outreach others greatly among substantial suppliers of the exam.
| Section | Weight | Objectives |
|---|---|---|
| IPv6 Basics | 15% | - IPv4/IPv6 Transition - IPv6 Routing (OSPFv3, static routes) - IPv6 Addressing |
| Network Security Basics | 10% | - Access Control Lists (ACL) - Basic Security Policies - Network Address Translation (NAT) |
| Network Management and O&M | 5% | - Network Troubleshooting Basics - Network Management Protocols (SNMP, Syslog) |
| WAN Interconnection Technology | 10% | - HDLC and PPP - PPPoE Configuration - Frame Relay Basics |
| SDN and Network Automation Basics | 10% | - SDN Concepts - Huawei CloudCampus and iMaster NCE Overview - Network Automation Basics |
| Routing Basics | 25% | - IP Routing Concepts - Static Routes - Dynamic Routing Protocols (OSPF, RIP, BGP basics) |
| Ethernet Technology | 20% | - Ethernet Frame Structure - VLAN Configuration - Spanning Tree Protocol (STP/RSTP) - Link Aggregation |
| Data Communication Network Basics | 5% | - Network Devices and Topologies - Network Communication Basics - OSI and TCP/IP Reference Models |
>> New H12-811_V1.0 Test Pattern <<
This feature provides students with real-time examination scenarios to feel some pressure and solve the H12-811_V1.0 practice exam as a real threat. These HCIA-Datacom V1.0 (H12-811_V1.0) practice tests are important for students so they can learn to solve real Huawei H12-811_V1.0 Exam Questions and pass Huawei H12-811_V1.0 certification test in a single try. The desktop-based Huawei H12-811_V1.0 practice test software works on Windows and the web-based HCIA-Datacom V1.0 practice exam is compatible with all operating systems.
NEW QUESTION # 195
Which of the following statements regarding Designated Routers (DR) in OSPF are correct?
Answer: A,D
Explanation:
* Statement A (Correct): DR and BDR must form an adjacency relationship to maintain routing information exchange.
* Statement B (Incorrect): The router with the higher priority is elected as DR, not the lower one.
* Statement C (Incorrect): DR is elected by routers within a broadcast/multi-access network, not necessarily all routers in the same network segment.
* Statement D (Correct): If two routers have the same priority, the one with the higher Router ID becomes the DR.
Reference: HCIA-Datacom Study Guide, OSPF DR/BDR Election Section.
NEW QUESTION # 196
Which of the following attributes cannot be used as a parameter to measure Cost?
Answer: C
NEW QUESTION # 197
The administrator has configured the router as shown in the figure, and the administrator wants to assign a shorter lease period to the DHCP address. Which of the following commands should be used, Ip pool pool1 network 10.
Answer: D
NEW QUESTION # 198
Refer to the following VLAN configurations on a Huawei switch. Which of the following statements are true?
Answer: A,B,D
Explanation:
To determine which statements are true, we need to analyze the VLAN configurations on the Huawei switch (SWA) as shown in the diagram and configuration details. We'll evaluate each client's VLAN membership and verify the correctness of the VLAN assignment commands based on Huawei switch configuration principles, as outlined in HCIA Datacom documentation. Let's break it down step by step:
* Understanding VLAN Assignment Types on Huawei Switches:
* Huawei switches support different port link types for VLAN assignment:
* Access Port: Carries traffic for a single VLAN (untagged). Typically used for end devices like PCs.
* Trunk Port: Carries traffic for multiple VLANs (tagged, except for the native VLAN, which is untagged). Typically used for interconnecting switches.
* Hybrid Port: Similar to a trunk port but can carry untagged traffic for specific VLANs, often used for both end devices and inter-switch links. It can tag or untag traffic based on configuration.
* Additionally, Huawei supports MAC address-based VLAN assignment (using the mac-vlan command), which assigns VLAN membership based on a device's MAC address, overriding port- based VLAN settings.
* Analyzing the Configuration for Each Client:Let's examine the configuration details for each interface connected to the clients and verify the VLAN assignments:
* Client 1 (connected to GigabitEthernet0/0/1):
* Configuration:
text
WrapCopy
vlan 10
#
interface GigabitEthernet0/0/1
port link-type access
port default vlan 10
* The port is configured as an access port with port link-type access and assigned to VLAN
10 using port default vlan 10.
* Access ports carry untagged traffic for a single VLAN, so Client 1 belongs to VLAN 10.
* The commands are correct for an access port assignment to VLAN 10.
* Statement C ("Client 1 belongs to VLAN 10, and the commands for VLAN assignment on the switch are correct") is true.
* Client 2 (connected to GigabitEthernet0/0/2):
* Configuration:
text
WrapCopy
vlan 20
mac-vlan mac-address 0022-0022-0022 priority 0
#
interface GigabitEthernet0/0/2
port hybrid untagged vlan 20
mac-vlan enable
* The port is configured as a hybrid port with port link-type hybrid and set to carry untagged traffic for VLAN 20 using port hybrid untagged vlan 20.
* Additionally, mac-vlan mac-address 0022-0022-0022 priority 0 and mac-vlan enable are configured, indicating MAC address-based VLAN assignment for a device with MAC address 0022-0022-0022.
* However, the diagram does not specify the MAC address of Client 2. If Client 2's MAC address is not 0022-0022-0022, the MAC-VLAN assignment does not apply, and the port's default VLAN (VLAN 20, untagged) determines its membership.
* If Client 2 has MAC address 0022-0022-0022, it would belong to the VLAN specified by the mac-vlan command (VLAN 20, as no specific VLAN is mentioned in the mac-vlan command, implying it uses the port's default VLAN or another configured VLAN). But since the MAC address is not provided, we assume the port-based VLAN assignment (VLAN 20) applies.
* The commands appear correct for a hybrid port with untagged VLAN 20 and MAC-VLAN enabled, but the effectiveness of the MAC-VLAN depends on Client 2's MAC address.
* Statement B ("Client 2 belongs to VLAN 20, and the commands for MAC address-based VLAN assignment on the switch are correct") is potentially true if Client 2's MAC is 0022-
0022-0022, but without confirmation, we must consider the port's default VLAN 20.
However, the MAC-VLAN priority is set to 0, which is unusual (priority 0 typically indicates the lowest priority, and Huawei recommends non-zero values for MAC-VLAN).
This suggests a potential configuration error or ambiguity.
* Given the lack of MAC address confirmation and the unusual priority 0, Statement B is not definitively true, as the MAC-VLAN assignment may not function as intended or may conflict with port-based VLAN 20.
* Client 3 (connected to GigabitEthernet0/0/3):
* Configuration:
text
WrapCopy
vlan 30
#
interface GigabitEthernet0/0/3
port link-type trunk
port trunk allow-pass vlan 30
* The port is configured as a trunk port with port link-type trunk and allows VLAN 30 traffic using port trunk allow-pass vlan 30.
* Trunk ports carry tagged traffic for specified VLANs. For Client 3 (an end device, typically not a switch), the trunk port configuration is unusual because end devices usually connect via access ports, not trunk ports. However, if Client 3 is configured to send tagged frames for VLAN 30 (e.g., a VLAN-aware device like a phone or IP camera), it can belong to VLAN 30.
* The commands are correct for a trunk port allowing VLAN 30, assuming Client 3 is configured to handle tagged VLAN 30 traffic.
* Statement D ("Client 3 belongs to VLAN 30, and the commands for VLAN assignment on the switch are correct") is true, assuming Client 3 supports VLAN tagging for VLAN 30.
* Client 4 (connected to GigabitEthernet0/0/4):
* Configuration:
text
WrapCopy
vlan 40
#
interface GigabitEthernet0/0/4
port link-type hybrid
port hybrid untagged vlan 40
* The port is configured as a hybrid port with port link-type hybrid and set to carry untagged traffic for VLAN 40 using port hybrid untagged vlan 40.
* Hybrid ports can carry untagged traffic for specific VLANs, so Client 4 belongs to VLAN
40 (untagged).
* The commands are correct for a hybrid port assignment to VLAN 40.
* Statement A ("Client 4 belongs to VLAN 40, and the commands for VLAN assignment on the switch are correct") is true.
* Evaluating Each Statement:
* A: True - Client 4 belongs to VLAN 40 (untagged on a hybrid port), and the commands are correct.
* B: Not definitively true - Client 2 belongs to VLAN 20 based on the port's hybrid untagged VLAN 20, but the MAC-VLAN configuration with priority 0 is ambiguous without Client 2's MAC address, and the priority 0 may indicate a configuration error. Thus, we cannot confirm the MAC address-based VLAN assignment is correct.
* C: True - Client 1 belongs to VLAN 10 (access port), and the commands are correct.
* D: True - Client 3 belongs to VLAN 30 (trunk port, assuming tagged traffic), and the commands are correct for a trunk port allowing VLAN 30.
* Conclusion:
* Statements A, C, and D are true based on the configuration and VLAN assignment rules.
Statement B is not definitively true due to the ambiguity of Client 2's MAC address and the unusual priority 0 in the MAC-VLAN configuration.
]]
References from HCIA Datacom Documents:
* HCIA Datacom V3.0, Chapter 4: VLAN Technologies - Access, Trunk, and Hybrid Port Configurations
* HCIA Datacom V3.0, Chapter 4: MAC Address-Based VLAN Assignment - mac-vlan Command and Priority Settings
* Huawei VLAN Configuration Guide (HCIA Datacom Certification Material) - Port Link Types and VLAN Assignment Rules
NEW QUESTION # 199
Refer to the following configuration of an interface on a switch. For which VLAN does the interface transmit tagged data frames?
interface GigabitEthernet0/0/1
port hybrid tagged vlan 2 to 3 100
port hybrid untagged vlan 4 6
Answer: B
Explanation:
Comprehensive Explanation: The interface configuration shows that VLANs 2, 3, and 100 are tagged, meaning frames belonging to these VLANs are transmitted with VLAN tags. VLANs 4 and 6 are untagged, meaning frames for these VLANs are transmitted without tags. The command port hybrid tagged vlan 2 to 3
100 specifies that data frames for VLANs 2, 3, and 100 are transmitted with tags, while port hybrid untagged vlan 4 6 configures the interface to transmit untagged frames for VLANs 4 and 6.
NEW QUESTION # 200
......
The DumpsFree is offering real and updated Huawei H12-811_V1.0 practice test questions. Very easy to use and perfectly assist you in Huawei H12-811_V1.0 exam preparation. Huawei H12-811_V1.0 Exams and will give you real-time Huawei H12-811_V1.0 exam preparation environment all the time.
Valid H12-811_V1.0 Exam Pdf: https://www.dumpsfree.com/H12-811_V1.0-valid-exam.html
BONUS!!! Download part of DumpsFree H12-811_V1.0 dumps for free: https://drive.google.com/open?id=1LlnrOmQIdTnqs3oKknOkq8-NUTxlmmWq