Free PDF SRAN-Radio-Network-Performance-Optimization - Unparalleled MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 Training Solutions

The high pass rate of our SRAN-Radio-Network-Performance-Optimization exam guide is not only a reflection of the quality of our learning materials, but also shows the professionalism and authority of our expert team on SRAN-Radio-Network-Performance-Optimization practice engine. Therefore, we have the absolute confidence to provide you with a guarantee: as long as you use our SRAN-Radio-Network-Performance-Optimization Learning Materials to review, you can certainly pass the exam, and if you do not pass the SRAN-Radio-Network-Performance-Optimization exam, we will provide you with a full refund.

Nokia SRAN-Radio-Network-Performance-Optimization Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: SRAN Architecture and Fundamentals15-20%- Single RAN integration principles
- SRAN solution components and functions
- SRAN network architecture overview
- Radio access concepts and principles
Topic 2: Radio Network Performance Monitoring20-25%- Real-time network monitoring techniques
- Threshold configuration and alerting
- KPI definition and measurement
- Performance data collection and analysis
- Performance monitoring tools and dashboards
Topic 3: SRAN Optimization Tools and Reports10-15%- Nokia NetAct and performance tools
- Report generation and interpretation
- Configuration management for optimization
- Automated optimization features
Topic 4: Radio Network Optimization Techniques25-30%- Coverage optimization methods
- Parameter tuning best practices
- Load balancing techniques
- Handover optimization
- Capacity optimization strategies
- Interference analysis and mitigation
Topic 5: Performance Troubleshooting20-25%- Optimization case studies
- Troubleshooting tools utilization
- Network failure identification and resolution
- Common performance issues diagnosis
- Root cause analysis methodologies

>> SRAN-Radio-Network-Performance-Optimization Training Solutions <<

SRAN-Radio-Network-Performance-Optimization Reliable Test Book | SRAN-Radio-Network-Performance-Optimization Valid Test Blueprint

Our company can guarantee that our SRAN-Radio-Network-Performance-Optimization actual questions are the most reliable. Having gone through about 10 years' development, we still pay effort to develop high quality SRAN-Radio-Network-Performance-Optimization study materials and be patient with all of our customers, therefore you can trust us completely. In addition, you may wonder if our SRAN-Radio-Network-Performance-Optimization Study Materials become outdated. Our SRAN-Radio-Network-Performance-Optimization actual questions are updated in a high speed. And you will enjoy the SRAN-Radio-Network-Performance-Optimization test guide freely for one year, which can save your time and money. We will send you the latest SRAN-Radio-Network-Performance-Optimization study materials through your email.

Nokia MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 Sample Questions (Q27-Q32):

NEW QUESTION # 27
In a 5G cell , the following parameter has been modified: lowLatencyReservation = 15 .
Which percentage of UEs will be reallocated to a higher SR periodicity group whenever the threshold for moving to a higher SR periodicity group is reached?

Answer: D

Explanation:
The correct answer is C .
In 5G uplink scheduling, SR , or Scheduling Request , is used by the UE to request uplink resources when it has data to send. SR periodicity affects uplink latency and PUCCH capacity: shorter SR periodicity gives lower latency but consumes more control-channel resources, while longer SR periodicity saves resources but increases delay.
The parameter lowLatencyReservation = 15 means 15% of the UE/resource share is reserved for the low- latency SR periodicity group. When the load threshold is reached, the remaining portion can be moved to a higher SR periodicity group.
Calculation:
100% # 15% = 85%
So the percentage of UEs that can be reallocated to a higher SR periodicity group is:
0.85 , or 85% .


NEW QUESTION # 28
In the context of mmWave deployments , what is the primary benefit of analog beamforming ?

Answer: C

Explanation:
The correct answer is A .
In mmWave systems, beamforming is essential because FR2 signals suffer from high path loss and blockage.
Analog beamforming uses fewer RF chains than fully digital beamforming, so it is cheaper and less complex in terms of RF hardware, power consumption, and implementation. Research and industry references explain that analog and hybrid beamforming architectures reduce the number of required ADCs/RF chains compared with fully digital beamforming, lowering cost and power complexity.
However, analog beamforming has limitations. It usually forms one beam, or a limited number of beams, at a time from a panel. Supporting multiple independent simultaneous beams and more UEs per sector is more associated with digital or hybrid beamforming, not pure analog beamforming.
Therefore, the primary benefit is:
Low cost and low complexity for coverage at higher mmWave bands.


NEW QUESTION # 29
A slice supporting sensors and smart meters would be categorized as:

Answer: B

Explanation:
The correct answer is A .
Sensors and smart meters are typical massive IoT use cases. They usually involve a very large number of devices sending small amounts of data, often with low mobility and low power requirements.
This type of traffic fits mMTC , or massive Machine Type Communications .
Why the other options are not correct:
URLLC is used for very low-latency and highly reliable services, such as industrial automation, remote control, or mission-critical applications.
eMBB is used for high-throughput broadband services, such as video, fixed wireless access, or enhanced mobile internet.
DNN is not a slice category. It means Data Network Name and identifies the data network the UE connects to, similar to APN in LTE.
Therefore, a slice supporting sensors and smart meters is categorized as:
mMTC.


NEW QUESTION # 30
A customer complains about coverage reduction after modernization of 4G TDD 4x4 sites to Concurrent mMIMO B41/n41 with AEHC module 64T64R . Which of the following statements regarding RF design changes to increase the coverage is correct?

Answer: B

Explanation:
The correct answer is C .
In a Concurrent mMIMO B41/n41 AEHC 64T64R deployment, LTE and NR share the same Massive MIMO active antenna system. Public Nokia material identifies AEHC as an AirScale Massive MIMO
64T64R B41 radio product, and Nokia's AirScale Massive MIMO portfolio is designed for high-capacity 5G
/RAN deployments.
Unlike a passive antenna system where coverage is changed mainly by physical/electrical RET, Massive MIMO coverage is strongly influenced by beamforming profiles and beamforming weight parameters . In concurrent LTE/NR operation, the RF design must consider the shared active antenna behavior, not independent passive RET-style tilt control per technology.
Therefore, for concurrent 4G/5G mMIMO coverage adjustment, the correct statement is:
The tilt/coverage behavior for both 4G and 5G is controlled by mMIMOSecSectorBFProfName and beamforming weight profile parameters.


NEW QUESTION # 31
Choose the correct statement from the options below.

Answer: C

Explanation:
The correct answer is B .
Beamforming is mainly about shaping and directing radio energy toward a UE or a target area. It improves coverage, SINR, and cell-edge performance by focusing the transmitted or received signal in a specific direction.
MIMO , or Multiple Input Multiple Output , uses multiple antenna paths to improve throughput, reliability, and spectral efficiency. MIMO can be used for spatial multiplexing, diversity, or beamforming depending on the antenna system and radio configuration.
Option A is incorrect because beamforming and MIMO are related but not the same.
Option C reverses the definitions.
Option D is incorrect because beamforming and MIMO are commonly used together, especially in Massive MIMO systems.
So the correct statement is:
Beamforming focuses on directing the signal, while MIMO focuses on utilizing multiple paths for data transmission.


NEW QUESTION # 32
......

In addition to the SRAN-Radio-Network-Performance-Optimization exam materials, our company also focuses on the preparation and production of other learning materials. If you choose our SRAN-Radio-Network-Performance-Optimization study guide this time, I believe you will find our products unique and powerful. Then you don't have to spend extra time searching for information when you're facing other exams later, just choose us again. And if you buy our SRAN-Radio-Network-Performance-Optimization Study Guide, you will love it.

SRAN-Radio-Network-Performance-Optimization Reliable Test Book: https://www.testkingfree.com/Nokia/SRAN-Radio-Network-Performance-Optimization-practice-exam-dumps.html