BONUS!!! Download part of PassTestking 300-110 dumps for free: https://drive.google.com/open?id=1SQqdQXJjHwZhlCCFIiPhPZBJwE5tWs8l
Our 300-110 study guide stand the test of time and harsh market, convey their sense of proficiency with passing rate up to 98 to 100 percent. Easily being got across by exam whichever level you are, our 300-110 simulating questions have won worldwide praise and acceptance as a result. They are 100 percent guaranteed practice materials. Though at first a lot of our new customers didn't believe our 300-110 Exam Questions, but they have became the supporters now.
| Section | Weight | Objectives |
|---|---|---|
| WLAN High Availability and Security Design | 20% | - Security architecture design
- High availability design
|
| Mobility Design | 25% | - Guest mobility and BYOD design - Roaming optimization
|
| Wireless Infrastructure Design | 30% | - Wireless Controller architecture and deployment
|
| Wireless Site Survey | 25% | - RF propagation and attenuation analysis - Pre-deployment survey and validation - Design requirements collection and constraint evaluation
|
>> 300-110 Reliable Test Objectives <<
Our company is a professional certificate test materials provider, and we are in the leading position in providing valid and effective exam materials. 300-110 exam braindumps are high quality, and it also contain certain questions and answers, and it will be enough for you to pass the exam. Besides, in order to let you have a deeper understanding of what you are going to buy, we offer you free demo to have a try before buying 300-110 Training Materials. We offer you free update for 365 days after purchasing, and the update version will be sent to your email address automatically.
NEW QUESTION # 62
Refer to the exhibit. A network engineer is designing a high availability SSO on a Cisco Catalyst 9800-40 WLC with multi-LAG network redundancy on two Catalyst 9300 switches. The LAG requirements are: * Each LAG must be connected to a single switch. * Different VLANs must be assigned to different LAGs. * The controller must learn the identity of partners that can support LAG capabilities in each port. * When any active LAG ports fail, a standby LAG port must provide redundancy. Which protocol must be used for the port channel on the interface to meet the design requirements?
Answer: A
Explanation:
The design requirements specify a multi-LAG configuration where each LAG connects to a single switch, different VLANs are assigned to different LAGs, the controller must dynamically learn partner LAG capabilities per port, and standby ports provide redundancy upon active port failure. These requirements collectively point to IEEE 802.3ad LACP (Link Aggregation Control Protocol) as the correct protocol. LACP is the industry-standard IEEE protocol that enables dynamic negotiation of LAG membership between endpoints - the WLC and each Catalyst 9300 switch exchange LACP PDUs (LACPDUs) to discover port capabilities, negotiate bundle membership, and monitor link status. LACP supports active and passive port states where active ports initiate negotiation and passive ports respond, and it provides the standby port mechanism through its hot-standby capability for link redundancy within the bundle. The requirement to ' learn the identity of partners that can support LAG capabilities ' is the defining characteristic of LACP ' s standardized PDU exchange mechanism. PAgP (Option C) is a Cisco proprietary port aggregation protocol that, while functionally similar, is not the IEEE standard and is incompatible with non-Cisco equipment in mixed environments. OSPF (Option B) and BGP (Option D) are Layer 3 routing protocols entirely unrelated to port channel negotiation. Reference: WLSD Study Guide - Catalyst 9800 LAG Configuration, LACP IEEE 802.3ad, Multi-LAG High Availability Design.
NEW QUESTION # 63
An engineer configured the optimized client roaming on Cisco WLC with an RSSI threshold of -72 dBm.
Clients report frequent disconnections. What must be configured for the AP to guide the client to a better AP?
Answer: A
Explanation:
The scenario presents a critical distinction in where Cisco WLC features are configured. Optimized roaming on Cisco WLC is a radio-level feature that monitors connected client RSSI and, when a client ' s signal falls below the configured threshold (-72 dBm), triggers a disassociation to force the client to reconnect to a stronger AP. However, without a mechanism to guide the client proactively before reaching the threshold, clients that disassociate simply reconnect to whatever AP their device selects, potentially causing the reported frequent disconnections. BSS Transition Management (802.11v) is configured at the SSID level and provides the complementary mechanism: before the client reaches the RSSI threshold, the AP sends a BSS Transition Management Request pointing the client toward a specific target AP with stronger signal. The correct architecture requires: optimized roaming configured at the radio level (triggering disconnection when RSSI falls too low) combined with BSS transition enabled at the SSID level (guiding the client to a better AP before forced disconnection). Options C and D incorrectly reverse the configuration levels for these features.
Disabling coverage hole detection (Option B) addresses a different problem and would not resolve the disconnection issue. Reference: WLSD Study Guide - Optimized Roaming Configuration, BSS Transition Management (802.11v), Client Roaming Architecture on Cisco WLC.
NEW QUESTION # 64
A university lecture hall has a Cisco wireless high-density network with this configuration: ?5 GHz only ?20-MHz channels ?UNII-1, UNII-2, and UNII-2E channels ?TPC minimum = 8 ?TPC maximum = 14 The lecture hall is 200 feet by 100 feet and has 16 Cisco APs that use directional antennas. Which feature must be included in the design to mitigate and reduce high-channel utilization from rogue APs?
Answer: B
Explanation:
Receive Start of Packet (RxSOP) is a Cisco proprietary mechanism that defines the minimum received signal threshold at which an access point will acknowledge an 802.11 frame and begin processing it. In a high-density lecture hall environment with 16 APs and directional antennas on a constrained channel plan, rogue APs operating on the same or adjacent channels contribute directly to elevated channel utilization by causing unnecessary medium contention, virtual carrier sensing via NAV, and clear channel assessment deferral. By raising the RxSOP threshold on the legitimate APs, the engineer creates a higher signal floor requirement -- only signals above the configured RxSOP level are processed. Signals from distant rogue APs, arriving below this threshold, are silently discarded rather than processed, preventing them from consuming airtime through CCA deferral and NAV mechanisms.
NEW QUESTION # 65
A university wants to deploy a high density of APs in an area where a high number of users congregate. Which functionality allows the university to optimize the RF settings for APs that operate in different environments or coverage zones?
Answer: A
Explanation:
RF Profiles are a Cisco WLC configuration construct that allows administrators to define a customized set of Radio Resource Management (RRM) parameters and apply them to a subset of APs operating in a specific environment or coverage zone. Within a university high-density deployment -- where a lecture hall, outdoor quad, cafeteria, and library may each require fundamentally different RF settings -- RF Profiles enable differentiation without globally modifying all RRM parameters. An RF Profile can define custom values for: minimum mandatory data rates, maximum transmit power, minimum transmit power, channel width (20/40/80 MHz), RxSOP thresholds, client load balancing parameters, and coverage hole detection sensitivity. This allows the engineer to apply aggressive interference mitigation settings to high-density assembly areas while maintaining full-coverage settings for perimeter zones.
NEW QUESTION # 66
What causes the most signal attenuation based on the wireless design tools?
Answer: A
Explanation:
Metal doors cause the most signal attenuation among common building materials due to the fundamental electromagnetic properties of metal. Metal is highly reflective and absorptive of radio frequency signals -- it creates what is effectively a Faraday cage effect around any room or space it encloses. In wireless design attenuation modeling tools such as Ekahau, metal is assigned the highest attenuation value among standard building materials, typically 30+ dB per surface.
NEW QUESTION # 67
......
PassTestking have made sure that each Cisco 300-110 exam questions are updated according to the latest Cisco 300-110 exam criteria issued by Cisco. Each Cisco 300-110 exam question gets reviewed by Cisco professionals many times to ensure incomparable accuracy. PassTestking offer a demo version of the actual Cisco 300-110 Exam Question only for customer satisfaction and the candidates can check the validity of the product before actually buying it.
300-110 Reliable Exam Answers: https://www.passtestking.com/Cisco/300-110-practice-exam-dumps.html
2026 Latest PassTestking 300-110 PDF Dumps and 300-110 Exam Engine Free Share: https://drive.google.com/open?id=1SQqdQXJjHwZhlCCFIiPhPZBJwE5tWs8l