BTW, DOWNLOAD part of ITdumpsfree NSE4_FGT_AD-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1JrQSj5DzanJjxx7qWBttKuuKKIiI4F9d
Many candidates find the Fortinet NSE4_FGT_AD-7.6 exam preparation difficult. They often buy expensive study courses to start their Fortinet NSE 4 - FortiOS 7.6 Administrator NSE4_FGT_AD-7.6 certification exam preparation. However, spending a huge amount on such resources is difficult for many Fortinet NSE 4 - FortiOS 7.6 Administrator NSE4_FGT_AD-7.6 Exam applicants.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> New NSE4_FGT_AD-7.6 Exam Dumps <<
If you are still study hard to prepare the Fortinet NSE4_FGT_AD-7.6 Exam, you're wrong. Of course, with studying hard, you can pass the exam. But may not be able to achieve the desired effect. Now this is the age of the Internet, there are a lot of shortcut to success. ITdumpsfree's Fortinet NSE4_FGT_AD-7.6 exam training materials is a good training materials. It is targeted, and guarantee that you can pass the exam. This training matrial is not only have reasonable price, and will save you a lot of time. You can use the rest of your time to do more things. So that you can achieve a multiplier effect.
NEW QUESTION # 39
Refer to the exhibits.
The exhibits show the system performance output and default configuration of high memory usage thresholds on a FortiGate device.
Based on the system performance output, what are the two possible outcomes? (Choose two.)
Answer: B,C
Explanation:
"Three different configurable thresholds define when FortiGate enters and exits conserve mode. If memory usage goes above the percentage of total RAM defined as the red threshold , FortiGate enters conserve mode."
"If memory usage keeps increasing, it might exceed the extreme threshold . While memory usage is above this highest threshold, all new sessions are dropped. "
"What actions does FortiGate take to preserve memory while in conserve mode?
* FortiGate does not accept configuration changes , because they might increase memory usage."
"However, if the memory usage exceeds the extreme threshold, new sessions are always dropped , regardless of the FortiGate configuration." Technical Deep Dive:
The system performance output shows Memory: 2042076k total, 1837868k used (90%) . The configured thresholds shown are:
* green = 82
* red = 88
* extreme = 89
Because memory usage is 90% , it is:
* Above the red threshold (88%) # so FortiGate has entered conserve mode
* Above the extreme threshold (89%) # so all new sessions are dropped
That makes A and D correct.
Why the others are wrong:
* B is not stated anywhere in the study guide as an automatic outcome of conserve mode.
* C is the opposite of what the guide says. In conserve mode, FortiGate does not accept configuration changes .
A useful verification command is:
diagnose hardware sysinfo conserve
Operationally, once a FortiGate crosses the red threshold , it starts protecting itself by limiting behavior that could increase memory usage. Once it crosses the extreme threshold , it becomes more severe and drops new sessions to keep the system from becoming unstable.
NEW QUESTION # 40
Refer to the exhibit.
The predefined deep-inspection and custom-deep-inspection profiles exclude some web categories from SSL inspection, as shown in the exhibit For which two reasons are these web categories exempted? (Choose two.)
Answer: A,C
Explanation:
"You may need to exempt traffic from SSL inspection if it is causing problems with traffic, or for legal reasons."
"Performing SSL inspection on a site that is enabled with HTTP Strict Transport Security (HSTS), for example, can cause problems with traffic. Remember, the only way for FortiGate to inspect encrypted traffic is to intercept the certificate coming from the server and generate a temporary one. After FortiGate presents the temporary SSL certificate, browsers that use HSTS refuse to proceed."
"Laws protecting privacy might be another reason to bypass SSL inspection. For example, in some countries, it is illegal to inspect SSL bank-related traffic. Configuring an exemption for sites is simpler than setting up firewall policies for each individual bank. You can exempt sites based on their web category, such as Finance and Banking..."
"The predefined deep-inspection and custom-deep-inspection profiles exclude some web categories-Finance and Banking, and Health and Wellness-and some FQDN addresses..." Technical Deep Dive:
The correct answers are B and D .
B is correct because the study guide explicitly says SSL inspection may be bypassed for legal reasons , especially where privacy laws restrict inspection of sensitive categories such as Finance and Banking . The same privacy rationale also explains why Health and Wellness is commonly exempted.
D is correct because some sites break under deep inspection due to HSTS . FortiGate must generate and present a temporary certificate during full SSL inspection, and browsers enforcing HSTS can reject that interception flow. That is why some sites are exempted from deep inspection.
Why the others are wrong:
* A is not stated in the guide.
* C refers to the separate Reputable websites option, which is a FortiGuard-maintained allowlist feature, not the reason the predefined categories shown in the exhibit are excluded.
From an operational standpoint, this is a classic balance between security visibility and application/legal compatibility . Deep inspection gives FortiGate payload visibility, but it can interfere with pinned-certificate
/HSTS behavior and can violate privacy policy for regulated content.
NEW QUESTION # 41
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up, but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, which two configuration changes will bring phase 2 up? (Choose two.)
Answer: A,B
Explanation:
Phase 1 being up confirms the two FortiGate devices can authenticate and build the IKE SA. Phase 2 failing indicates the IPsec (Quick Mode) SA negotiation is failing due to mismatched Phase 2 parameters.
From the exhibit, the Phase 2 mismatches that would prevent SA establishment are:
1) Phase 2 selectors must mirror each other (Proxy IDs)
HQ-NGFW Phase 2 selector shows:
Local: 10.0.11.0/24
Remote: 172.20.1.0/24
BR1-FGT Phase 2 selector shows:
Local: 172.20.1.0/24
Remote: 10.11.0.0/24 ⟵ does not match HQ's local subnet (10.0.11.0/24)
In FortiOS, Phase 2 comes up only when the peers' selectors (proxy IDs) match as opposite pairs (local on one side = remote on the other).
✅ Fix: A. On BR1-FGT, set Remote Address to 10.0.11.0/255.255.255.0.
2) Phase 2 proposal must match (encryption/authentication)
HQ-NGFW shows encryption AES128 (with SHA1)
BR1-FGT shows encryption AES256 (with SHA1)
For Phase 2 to establish, both peers must have at least one common proposal (same encryption and authentication settings). With one side set to AES128 and the other to AES256, there is no match.
✅ Fix: D. On HQ-NGFW, set Encryption to AES256.
Why the other options are not correct
B . Enable Diffie-Hellman Group 2: The exhibit's mismatch is not resolved by adding DH group 2, and DH group must match when PFS is enabled. This option does not align the peers based on what's shown.
C . Set Seconds to 43200: Phase 2 lifetime mismatches typically do not prevent Phase 2 from coming up (the negotiated lifetime can be adjusted by the peers). The hard blockers here are the selectors and proposal mismatch.
NEW QUESTION # 42
Refer to the exhibit. The exhibit shows the FortiGuard Category Based Filter section of a corporate web filter profile.
An administrator must block access to download.com, which belongs to the Freeware and Software Downloads category. The administrator must also allow other websites in the same category.
What are two solutions for satisfying the requirement? (Choose two.)
Answer: B,C
Explanation:
You can create a web rating override to change the website category to someone that is blocked in the web filter profile You can enable the URL Filter in the Web Filter Profile and block the website.
NEW QUESTION # 43
Refer to the exhibits.
The exhibits show a diagram of a FortiGate device connected to the network, and the firewall configuration.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-User2.
The policy should work such that Remote-User1 must be able to access the Webserver while preventing Remote-User2 from accessing the Webserver. Which additional configuration can the administrator add to a deny firewall policy, beyond the default behavior, to block Remote-User2 from accessing the Webserver?
(Choose one answer)
Answer: D
Explanation:
"The example on this slide shows how FortiGate handles two incoming connections to the same external address, but on different ports... Both connections match the firewall policy ID, which references two VIPs as destination."
"In FortiOS, VIPs and firewall address objects are completely different. They are stored separately with no overlap. Starting in version 7.2.4, the parameter match-vip is enable by default and allows the firewall address objects to match VIPs."
"In the example shown on this slide, the destination of the first firewall policy is set to all . This means all destination addresses (0.0.0.0/0), by default, including the external addresses defined on the VIPs." Technical Deep Dive:
The correct answer is C. Set the Destination address as Webserver in the Deny policy.
FortiGate allows VIP objects to be used as destination objects in firewall policies . The study guide explicitly shows incoming connections matching firewall policies that reference VIPs as the destination. That means if the administrator wants to deny only Remote-User2 # Webserver , the clean and specific way is to set the Destination in the Deny policy to the Webserver VIP .
Why this is the best answer:
* With the default deny-policy behavior, destination = all plus match-vip enabled by default means the deny rule can match VIP external addresses too.
* But that is broader than necessary. If the intent is specifically to block access only to the published Webserver , then the deny rule should explicitly reference the Webserver VIP as the destination.
Why the other options are wrong:
* A is incorrect because match-vip is relevant to deny policy behavior, and the study guide notes that match-vip is available only when the firewall policy action is set to DENY . An allow policy is not where this setting applies.
* B is unrelated. IP pools are for SNAT behavior, not for selectively denying inbound access to a VIP.
* D is incorrect because Deny_IP is the source object representing the remote user, not the destination web server.
So the proper additional configuration is to make the deny policy specific by setting:
* Source = Deny_IP
* Destination = Webserver
* Action = DENY
That blocks Remote-User2 from the VIP-published web server while still allowing Remote-User1 to reach it through the lower allow policy.
NEW QUESTION # 44
......
If you are interested in ITdumpsfree's training program about Fortinet certification NSE4_FGT_AD-7.6 exam, you can first on WWW.ITdumpsfree.COM to free download part of the exercises and answers about Fortinet Certification NSE4_FGT_AD-7.6 Exam as a free try. We will provide one year free update service for those customers who choose ITdumpsfree's products.
New NSE4_FGT_AD-7.6 Exam Notes: https://www.itdumpsfree.com/NSE4_FGT_AD-7.6-exam-passed.html
DOWNLOAD the newest ITdumpsfree NSE4_FGT_AD-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1JrQSj5DzanJjxx7qWBttKuuKKIiI4F9d