The H35-831 exam study guide includes the latest H35-831 PDF test questions and practice test software which can help you to pass the H35-831 test smoothly. The test questions cover the practical questions in the test H35-831 certification and these possible questions help you explore varied types of questions which may appear in the H35-831 test and the approaches you should adapt to answer the questions. Every H35-831 exam question is covered in our H35-831 learning braindump. You will get the H35-831 certification for sure with our H35-831 training guide.
Huawei H35-831 Exam consists of three main sections: Network Design, Network Security, and Network Management and Optimization. The Network Design section covers topics such as network architectures, network protocols, network planning, and network implementation. The Network Security section focuses on topics such as network security threats, security policies, security technologies, and security management. The Network Management and Optimization section covers topics such as network performance management, network fault management, network configuration management, and network optimization.
It is important to cover HCIE-Datacom-Carrier (Written) V1.0 (H35-831) exam topics and check if you need to practice them. If you are talking about the Huawei H35-831 certification exam, you need to practice and overcome mistakes. If you do not practice for it, chances are that you might get confused while appearing for the H35-831 Exam. When you get the test study material, it comes with the Huawei H35-831 practice exams (desktop & web-based) to solve.
The H35-831 exam comprises a written test that assesses the candidate's theoretical knowledge of data communication technologies, including network architecture, network protocols, network security, network virtualization, and network automation. H35-831 exam also covers advanced topics such as network design, network optimization, and network troubleshooting. To pass the exam, candidates must have a deep understanding of data communication technologies and be able to apply their knowledge to solve complex problems in carrier networks. The H35-831 Certification is recognized worldwide and is highly valued by employers in the telecommunications industry, making it an excellent choice for professionals who want to advance their careers in this field.
NEW QUESTION # 60
Which vBRAS communication channel is used to carry forwarding-control data sent from the vBRAS-CP to the vBRAS-UP?
Answer: A
Explanation:
Huawei Reference Verification:
Huawei's CUPS design separates communication interfaces between vBRAS-CP and vBRAS-UP into protocol, control, and management functions. The control channel sends subscriber service and forwarding entries from the control-plane system to the user-plane device and supports user-plane event reporting.
Subscriber access signaling, such as PPPoE and IPoE messages requiring central processing, uses the protocol channel. Management operations and configuration queries use management-plane interfaces and protocols such as NETCONF. Once authentication succeeds, the CP distributes the forwarding rules needed for the UP to process traffic. The channel transporting those forwarding-control entries is the control channel.
Technical Deep Dive:
D is correct because the control channel exists specifically to program the distributed forwarding plane. The vBRAS-CP coordinates user sessions, authentication, address allocation, accounting, policy, and UP resource assignment. The vBRAS-UP terminates access connectivity, enforces forwarding and QoS policy, maintains subscriber counters, and handles the network-side transport functions. During PPPoE session setup, protocol messages reach the CP through the protocol channel. After the CP decides the applicable services, it sends session state and forwarding entries to the UP over the control channel, commonly associated with CUSP.
Management functions such as querying configuration or delivering equipment settings are distinct and can use NETCONF. Supported UP forwarding ASICs apply the installed user state without hairpinning ordinary traffic through the CP. This architecture permits centralized subscriber management together with distributed, scalable forwarding capacity.
#######################################################
NEW QUESTION # 61
The figure illustrates the fixed-broadband cloudification acceleration scenario of the intelligent cloud- network. Which statements about this network are incorrect?
Exhibit 16.1 - Original topology/configuration figure
Select all that apply.
Answer: A,D
Explanation:
Huawei Reference Verification:
Huawei's SRv6 network design separates the public transport plane, which must provide locator and loopback reachability, from VPN service-route advertisement. IS-ISv6 can flood infrastructure IPv6 routes and the relevant SRv6 locator reachability among metro and aggregation routers. BGP over the inter-AS service relationship distributes the VPN routes. An EBGP VPN session is not the public-plane IGP mechanism intended for locator distribution in the diagram, and IS-ISv6 does not substitute for the private-plane BGP advertisement of VPN routes and service SIDs. Accordingly C and D are the incorrect statements.
Technical Deep Dive:
C and D are incorrect. In the shown metro/cloud interconnection the public network plane supplies transport reachability for packet forwarding, while the private plane distributes customer VPN information. IS-ISv6 carries IPv6 infrastructure reachability such as loopback and SRv6 locator prefixes, allowing transit forwarding toward SID locators. BGP distributes VPN routes and service-related SID attributes. Thus A correctly describes underlay IS-ISv6, and B describes the intended EBGP-based service route exchange. C incorrectly assigns the locator-distribution role to public-plane EBGP for this design, and D incorrectly assigns private VPN SID distribution to the IGP. A locator is the routable portion of an SRv6 SID; the function encodes service behavior such as End.DT4/End.DT6. Forwarding ASICs use IPv6 FIB entries to carry packets toward locators, while egress PE SID processing selects the VPN behavior.
#######################################################
NEW QUESTION # 62
Which of the following statements is incorrect about the SR-TE tunnel configuration below?
[R1] interface tunnel1
[R1-Tunnel1] ip address unnumbered interface LoopBack0
[R1-Tunnel1] tunnel-protocol mpls te
[R1-Tunnel1] destination 3.3.3.3
[R1-Tunnel1] mpls te tunnel-id 1
[R1-Tunnel1] mpls te signal-protocol segment-routing
[R1-Tunnel1] mpls te pce delegate
Select all that apply.
Answer: A,C
Explanation:
Huawei Reference Verification:
Huawei's SR-TE tunnel CLI separates the transport tunnel type, the signaling protocol and the path- management mode. `tunnel-protocol mpls te` establishes an MPLS TE tunnel interface; `mpls te signal- protocol segment-routing` identifies Segment Routing as its signaling technology. `ip address unnumbered interface LoopBack0` borrows the Loopback0 address, and `mpls te tunnel-id 1` sets the tunnel identifier. The command `mpls te pce delegate` delegates LSP path management to the PCE through PCEP, rather than specifying a manually configured explicit path. Therefore the claims that SR is the tunnel protocol or that the path is manually specified are incorrect.
Technical Deep Dive:
C and D are incorrect. The displayed interface is a Tunnel1 MPLS TE tunnel whose address is borrowed from LoopBack0 and whose destination is 3.3.3.3. The tunnel ID is 1, unique as required within the applicable tunnel context. Segment Routing in this configuration is the signaling mechanism, not the value of the `tunnel- protocol` field. PCE delegation transfers supported LSP path computation/management to a Path Computation Element; it does not define a static explicit-path sequence locally. A manual explicit path would require its own explicit-path configuration and reference. PCEP is a TCP-based control protocol allowing the PCC to report LSP state and the PCE to deliver calculated routes or updates. An operational engineer can inspect the status with `display interface tunnel 1`, `display mpls te tunnel` and `display current-configuration interface Tunnel1`. The broader lesson is to read CLI keywords according to the configuration hierarchy rather than interpreting the presence of 'segment-routing' as a replacement of the underlying MPLS TE tunnel type.
#######################################################
NEW QUESTION # 63
In BGP EVPN, which of the following route types is used to advertise external routes?
Answer: E
Explanation:
Huawei Reference Verification:
Huawei BGP EVPN defines route types to distribute distinct categories of Ethernet VPN reachability. Type 1 identifies Ethernet Auto-Discovery information, Type 2 MAC/IP bindings, Type 3 inclusive multicast information, and Type 4 Ethernet Segment information. Type 5 is the IP Prefix route and advertises IPv4/IPv6 prefixes, including external routes imported from another protocol or routing domain. RFC 9136 standardizes EVPN IP Prefix Advertisement route type 5. Therefore the correct selection for external IP-prefix reachability is B.
Technical Deep Dive:
B is correct. EVPN is an MP-BGP control plane capable of supporting Layer 2 bridging and Layer 3 service distribution over an MPLS or VXLAN transport. A remote subnet or imported external prefix does not require advertising every individual destination MAC address. Instead a Type 5 IP Prefix Advertisement announces the network prefix, attributes and associated next-hop information. A receiving PE imports it according to route-target policy, resolves the EVPN next hop and installs the forwarding entry in the correct tenant or VPN table. Type 2 MAC/IP routes mainly represent host address bindings, Type 3 supports BUM transport setup, Type 1 supports Ethernet Auto-Discovery and Type 4 Ethernet Segment information. Thus the presence of five offered route types does not make the question multi-answer: Type 5 alone is the IP-prefix route. VRP verification can use `display bgp evpn all routing-table` and the relevant VPN-instance route display.
#######################################################
NEW QUESTION # 64
SR and LDP interworking technology allows SR and LDP to operate together on the same network. SR and LDP networks can be interconnected through this technology to implement MPLS forwarding. To interwork with an LDP network, an SR network needs a particular device type to advertise SIDs on behalf of SR- incapable LDP devices. What is this device called?
Answer: A
Explanation:
Huawei Reference Verification:
Huawei's SR/LDP interworking design defines a mapping server as an SR-capable node that advertises Prefix- to-SID mappings on behalf of LDP nodes that cannot originate Segment Routing advertisements. A mapping client receives this information and can use the assigned SID to calculate SR paths toward destinations otherwise reachable through the LDP domain. Border or interworking routers can connect SR and LDP transport segments to provide continuity during gradual migration. The mapping server originates the advertisements; a mapping client consumes them. Therefore D is correct.
Technical Deep Dive:
D is correct. SR-MPLS distributes Prefix-SIDs through IGP extensions, whereas traditional LDP distributes label bindings using LDP sessions. An LDP-only router cannot advertise a valid SR Prefix-SID directly. The mapping server bridges this information gap by announcing a configured prefix-to-SID association for the SR- incapable node. SR-capable mapping clients learn the association and can build a label stack toward that destination. The interworking boundary performs the MPLS operations required to connect the SR and LDP forwarding segments. A representative OSPF-based Huawei configuration includes `segment-routing`,
`mapping-server prefix-sid-mapping 10.10.10.10 32 100`, and in the OSPF process `segment-routing mapping- server send` where supported. Mapping server versus mapping client is a producer/consumer distinction: the server advertises the prefix mappings, and the client receives and uses them. The feature permits phased modernization of large carrier networks without replacing all LDP devices at once.
#######################################################
NEW QUESTION # 65
......
Download H35-831 Demo: https://www.prepawaytest.com/Huawei/H35-831-practice-exam-dumps.html