P.S. Free & New NSE6_EDR_AD-7.0 dumps are available on Google Drive shared by FreeDumps: https://drive.google.com/open?id=1V5lo5xuV-vA44QgY7TBY3AtWbjX5gNqQ
As we all know, if you want to pass the NSE6_EDR_AD-7.0 exam, you need to have the right method of study, plenty of preparation time, and targeted test materials. However, most people do not have one or all of these. That is why I want to introduce our NSE6_EDR_AD-7.0 Original Questions to you. So why not try our Fortinet original questions, which will help you maximize your pass rate? Even if you unfortunately fail to pass the exam, we will give you a full refund.
| Section | Objectives |
|---|---|
| FortiEDR Architecture and Components | - FortiEDR components overview (agents, management console, collectors) - System architecture and deployment models |
| Threat Detection and Response | - Automated response actions and remediation - Incident detection and alert handling |
| Policy Configuration and Management | - Prevention and detection policies - Policy tuning and exclusions |
| System Administration and Troubleshooting | - System monitoring and health checks - Troubleshooting common FortiEDR issues |
| Forensics and Investigation | - Endpoint investigation workflows - Event analysis and telemetry review |
| Installation and Deployment | - Agent deployment and onboarding - Server and console installation requirements |
>> Valid Exam NSE6_EDR_AD-7.0 Preparation <<
Our NSE6_EDR_AD-7.0 Exam Torrent carries no viruses. We provide free update and online customer service which works on the line whole day. Our study materials provide varied versions for you to choose and the learning costs you little time and energy. You can use our NSE6_EDR_AD-7.0 exam prep immediately after you purchase them, we will send our product within 5-10 minutes to you. We treat your time as our own time, as precious as you see, so we never waste a minute or two in some useless process. Please rest assured that use, we believe that you will definitely pass the exam.
NEW QUESTION # 15
You are asked to create a playbook to isolate a device with a collector. Which action category does isolating a device with a collector fall under? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. Investigation .
The FortiEDR 7.0.0 Administration Guide states that Investigation actions enable administrators to isolate a device or assign it to a high-security Collector Group for further investigation of the device's activity. Under the Investigation section, the guide lists the available investigation action types, including "Isolate device with Collector," "Isolate device with NAC," and "Move device to High Security Group." For Isolate device with Collector , the guide explains that the action blocks communication to and from the affected Collector, and it applies only to endpoint Collectors. If the Playbook policy is configured to isolate a device for a malicious event, then when a malicious security event is triggered, the device is isolated from communicating with the outside world for both sending and receiving.
So, this is not a Remediation , Custom , or Notification action. In FortiEDR Playbook policy terminology, Isolate device with Collector belongs under Investigation .
=========
NEW QUESTION # 16
Refer to the Exhibit:
Based on the FortiEDR status output shown in the exhibit, what are two reasons for the degraded state?
(Choose two answers)
Answer: B,D
Explanation:
The correct answers are B and C .
The exhibit shows:
FortiEDR Service: Up
FortiEDR Driver: Up
FortiEDR Status: Degraded (no configuration)
This means the local Collector service and driver are running, but the Collector has not received valid configuration. In FortiEDR, a Collector must register and communicate with the FortiEDR Aggregator to receive its configuration. The guide states that the Collector initially sends registration information to the FortiEDR Aggregator using SSL, sends ongoing health/status/security-event information, and receives its configuration from the Aggregator.
During installation, a non-customized Windows Collector requires the correct Aggregator address , Aggregator port 8081 , and registration password . The guide explicitly states that the Aggregator port should be specified as 8081 , and that the registration password must be entered during installation.
Therefore, an incorrect registration password or incorrect port number can prevent proper registration
/configuration retrieval, resulting in a degraded/no-configuration state.
Option A is not the best answer because Windows Firewall being enabled by itself does not automatically cause this FortiEDR status; only if it blocks required FortiEDR communication would it matter, and the option is too generic. Option D is also not correct as written because the Collector receives configuration from the Aggregator , not directly from the Central Manager. The guide describes Collector-to-Aggregator communication for registration and configuration.
=========
NEW QUESTION # 17
Which two criteria are required for integrating FortiEDR with the Fortinet Security Fabric? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and C .
For Fortinet Security Fabric correlation through FortiAnalyzer or FortiAnalyzer Cloud, the FortiEDR guide states that FortiEDR can integrate with FortiAnalyzer/FortiAnalyzer Cloud "to correlate data between FortiEDR and the Fortinet Security Fabric and issue eXtended detection alerts." To complete this, you must configure an eXtended Detection Source connector and enable eXtended Detection rules and FortiEDR Threat Hunting event collection.
The prerequisites include connectivity from the FortiEDR Central Manager to Fortinet Cloud Services (FCS) . The same prerequisite list also requires either a FortiAnalyzer administrator account with JSON API access enabled or, for FortiAnalyzer Cloud, a valid FortiCloud API user with read/write access to the FortiAnalyzer Cloud portal.
Option B is wrong because a Forensics add-on license is not listed as a requirement for this integration.
Option D is badly worded and not correct. A Jumpbox with connectivity to FortiAnalyzer is required, and the guide points to FortiEDR Core setup for Jumpbox configuration, but the answer option says Core with core- only functionality , which is not the stated requirement.
=========
NEW QUESTION # 18
Refer to the Exhibit:
Based on the event shown in the exhibit, which two statements about the event are true? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are A and B .
The exhibit shows the event classification as Malicious , classified by FortinetCloudServices , and the history states that device R2D2-kvm63 was moved from the Training Collector Group to the High Security Collector Group . This is a Playbook action. The FortiEDR guide explains that after classification changes, the Overview pane displays the history of automatic FortiEDR actions, including Playbook policy-related actions .
The guide specifically lists Move device to High Security Group under Investigation actions in Playbook policies. It states that a checkmark in a classification column means the device is automatically moved to the High Security Collector Group when a security event with that classification is triggered. So the exhibit proves that Playbooks are configured for this event.
The second correct answer is B because the triggered rule is under Training * Extended Detection . The FortiEDR guide states that the eXtended Detection Policy logs events and displays them in the Incidents tab, but no blocking options are provided for this policy.
Option C is wrong because moving a device to the High Security Collector Group is not the same as isolating the device. Isolation would block communication to/from the affected Collector. The exhibit shows a Collector Group move, not isolation.
Option D is wrong because Extended Detection does not block. The guide explicitly says Extended Detection events are logged and displayed, with no blocking options provided.
=========
NEW QUESTION # 19
Refer to the exhibit:
You are asked to block applications based on hash attributes. Which two factors must you consider when applying the hash value? (Choose two answers)
Answer: C,D
Explanation:
The FortiEDR 7.0.0 Administration Guide states that when manually adding applications to be blocked, you can define the application using Hash or using any combination of File Name / Path / Signer attributes. This means hashes can be used independently and do not require filename, path, or signer attributes.
The guide also states that each hash is a unique identifier of an individual application, and the exhibit itself shows the hash field note: "SHA-1 or SHA-2 or MD5." Therefore, the hash must use a supported hash format, making D correct.
For multiple hash entries, the uploaded guide text says they must be comma separated , while the exhibit note says "You can enter multiple hashes comma separated." So the technically exact guide wording supports comma separation, not line separation. However, given your answer choices, A is clearly trying to test the requirement that multiple hashes must be separated correctly. The option wording says "line- separated," which is not exact against the guide; the better wording would be comma-separated . Since no
"comma-separated" option is provided, A is the intended separation-related answer, but the wording is flawed.
Option B is definitely wrong because hash mode is an alternative to attributes. Option C is also not the best answer because, although each hash uniquely identifies a file/application variant, the operational requirement is not that "hashes must be unique to each application" in the way the option implies. Hashes may represent different variants of the same application.
NEW QUESTION # 20
......
Most of the materials on the market do not have a free trial function. Even some of the physical books are sealed up and cannot be read before purchase. As a result, many students have bought materials that are not suitable for them and have wasted a lot of money. Especially for those students who are headaches when reading a book, NSE6_EDR_AD-7.0 study tool is their gospel. Because doing exercises will make it easier for one person to concentrate, and at the same time, in the process of conducting a mock examination to test yourself, seeing the improvement of yourself will makes you feel very fulfilled and have a stronger interest in learning. NSE6_EDR_AD-7.0 Guide Torrent makes your learning process not boring at all.
Reliable Test NSE6_EDR_AD-7.0 Test: https://www.freedumps.top/NSE6_EDR_AD-7.0-real-exam.html
DOWNLOAD the newest FreeDumps NSE6_EDR_AD-7.0 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1V5lo5xuV-vA44QgY7TBY3AtWbjX5gNqQ