P.S. Free & New CWNA-109 dumps are available on Google Drive shared by Prep4sures: https://drive.google.com/open?id=1SD5oSnc0TItxAhHo4-nI2CzRJg9CbWg5
To keep constantly update can be walk in front, which is also our Prep4sures's idea. Therefore, we regularly check CWNA-109 exam to find whether has update or not. Once the update comes out, we will inform our customers who are using our products so that they can have a latest understanding of CWNA-109 Exam. All the update service is free during one year after you purchased our CWNA-109 exam software.
| Section | Weight | Objectives |
|---|---|---|
| WLAN Network Architecture and Design Concepts | 15% | - WLAN deployment architectures
|
| Radio Frequency (RF) Technologies | 20% | - RF fundamentals and behavior
|
| WLAN Network Security | 15% | - Security threats and mitigation
|
| WLAN Regulations and Standards | 15% | - Regulatory bodies and frequency bands
|
| WLAN Troubleshooting and Management | 15% | - Performance and connectivity issues
|
| WLAN Protocols and Devices | 20% | - Wireless hardware and software
|
After the user has purchased our CWNA-109 learning materials, we will discover in the course of use that our product design is extremely scientific and reasonable. Details determine success or failure, so our every detail is strictly controlled. For example, our learning material's Windows Software page is clearly, our CWNA-109 Learning material interface is simple and beautiful. There are no additional ads to disturb the user to use the CWNA-109 learning material. Once you have submitted your practice time, CWNA-109 learning Material system will automatically complete your operation.
NEW QUESTION # 39
An RF signal sometimes bends as it passes through some material other than free space. What is the term that describes this behavior?
Answer: A
Explanation:
Refraction is the bending of an RF signal as it passes through a medium with a different density than free space. This can cause the signal to change its direction and speed, which can affect the accuracy and reliability of wireless communication. Refraction is influenced by factors such as temperature, humidity, and atmospheric pressure12. References: CWNA-109 Study Guide, Chapter 2: Radio Frequency Fundamentals, page 72; CWNA-109Study Guide, Chapter 2: Radio Frequency Fundamentals, page 67.
NEW QUESTION # 40
802. 11ax (HE) introduces Resource Units that can be used to allow communications with multiple devices at the same time, on the same channel, in the same BSS. What feature of 802.1 lax provides this functionality?
Answer: B
Explanation:
The feature of 802.11ax (HE) that provides this functionality is OFDMA. OFDMA stands for Orthogonal Frequency Division Multiple Access and is a technology that allows multiple devices to communicate simultaneously on the same channel in the same BSS. OFDMA works by dividing a channel into smaller subchannels called Resource Units (RUs), which are composed of groups of subcarriers or tones. Each RU can be assigned to a different device based on its bandwidth requirement and signal quality. This way, OFDMA can increase the efficiency and capacity of the channel by reducing overhead, contention, and latency. OFDMA can also support both uplink and downlink multi-user transmissions using trigger frames and buffer status reports. 6 GHz support, TWT, and Wi-Fi-LTE are not features of 802.11ax that provide this functionality. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 226; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 216.
NEW QUESTION # 41
A client complains of low data rates on his computer. When you evaluate the situation, you see that the signal strength is -84 dBm and the noise floor is -96 dBm. The client is an 802.11ac client and connects to an 802.11 ac AP. Both the client and AP are 2x2:2 devices. What is the likely cause of the low data rate issue?
Answer: A
Explanation:
Weak signal strength is the likely cause of the low data rate issue for the client that has a signal strength of
-84 dBm and a noise floor of -96 dBm. The client is an 802.11ac client and connects to an 802.11ac AP. Both the client and AP are 2x2:2 devices. Signal strength is the measure of how strong the RF signal is at the receiver. Signal strength can affect the reliability and performance of the wireless connection, as well as the data rate and throughput of the traffic. The higher the signal strength, the better the signal quality and the higher the data rate. The lower the signal strength, the worse the signal quality and the lower the data rate.
The data rate of an 802.11ac connection depends on several factors, such as channel bandwidth, modulation and coding scheme (MCS), spatial streams, guard interval, and beamforming. However, these factors are also influenced by the signal strength, as they require a certain signal-to-noise ratio (SNR) to operate properly.
SNR is the ratio of the signal strength to the noise floor, which is the measure of the background noise or interference in the RF environment. The higher the SNR, the more robust and efficient the communication.
The lower the SNR, the more prone and vulnerable to errors and retries.
According to the CWNA Official Study Guide , Table 3.7, page 112, an 802.11ac connection with a channel bandwidth of 80 MHz, an MCS of 9, two spatial streams, a short guard interval, and no beamforming can achieve a maximum data rate of 867 Mbps. However, this data rate requires a minimum SNR of 30 dB to maintain a sufficient signal quality. If the signal strength is -84 dBm and the noise floor is -96 dBm, then the SNR is only 12 dB (-84 dBm - (-96 dBm) = 12 dB), which is far below the required SNR for this data rate.
Therefore, the data rate will drop significantly to match the lower SNR and signal quality.
To solve this problem, the signal strength should be increased to improve the SNR and data rate. This can be done by adjusting the output power or channel assignment of the AP or client, relocating or reorienting some APs or antennas to reduce attenuation or interference, updating or replacing some faulty or outdated hardware or software components, etc. References: , Chapter 3, page 112; , Section 3.2
NEW QUESTION # 42
What statement about the beamwidth of an RF antenna is true?
Answer: C
Explanation:
The beamwidth of an RF antenna is the angular measure of how wide the main lobe of radiation is. The main lobe is the area where the signal strength is highest and most concentrated. The beamwidth is calculated at the points where the main lobe decreases power by 3 dB, which means it is half of the maximum power. The beamwidth can be measured in both horizontal and vertical planes, depending on how the antenna is oriented.
The horizontal beamwidth is also called azimuth, while the vertical beamwidth is also called elevation. The beamwidth patterns on an antenna polar chart indicate how the RF energy is distributed in different directions. References: 1, Chapter 2, page 66; 2, Section 2.3
NEW QUESTION # 43
XYZ Company has decided to install an 802.11 WLAN system that will support 1083 wireless users, but they are concerned about network security. XYZ is interested in deploying standardized security features. In addition to WPA2-Enterprise with PEAP and role-based access control, XYZ would like to support management frame protection as well as a fast secure roaming protocol for future mobile handsets.
As XYZ Company selects a product to deploy, what two IEEE amendments, which are included in 802.11-
2016, and 802.11-2020 should be supported to provide the management frame protection and fast secure roaming security features?
Answer: A
Explanation:
The two IEEE amendments that should be supported to provide the management frame protection and fast secure roaming security features are 802.11r and 802.11w12.
* 802.11r (Fast BSS Transition): This amendment to the IEEE 802.11 standard permits continuous connectivity aboard wireless devices in motion, with fast and secure client transitions from one Basic Service Set to another1.
* 802.11w (Management Frame Protection): This amendment increases the security of its management frames2.
NEW QUESTION # 44
......
Every version of CWNA-109 study materials that we provide to you has its own advantage: the PDF version has no equipment limited, which can be read anywhere; the online version can use on any electronic equipment there is network available; the software version can simulate the Real CWNA-109 Exam environment to let you have more real feeling to CWNA-109 real exam, besides the software version can be available installed on unlimited number devices.
Latest CWNA-109 Dumps Book: https://www.prep4sures.top/CWNA-109-exam-dumps-torrent.html
BONUS!!! Download part of Prep4sures CWNA-109 dumps for free: https://drive.google.com/open?id=1SD5oSnc0TItxAhHo4-nI2CzRJg9CbWg5