DumpTOP는DumpTOP의Autodesk인증 BIM_MGT_101덤프자료를 공부하면 한방에 시험패스하는것을 굳게 약속드립니다. DumpTOP의Autodesk인증 BIM_MGT_101덤프로 공부하여 시험불합격받으면 바로 덤프비용전액 환불처리해드리는 서비스를 제공해드리기에 아무런 무담없는 시험준비공부를 할수 있습니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Data management | 20% | - Audit and resolve model issues
|
| Topic 2: Project needs assessment | 28% | - Analyze project requirements
|
| Topic 3: Collaboration process | 36% | - Coordinate and maintain geolocation
|
| Topic 4: Corporate standards and documentation | 16% | - Create project and content templates
|
아무런 노력을 하지 않고 승진이나 연봉인상을 꿈꾸고 있는 분이라면 이 글을 검색해낼수 없었을것입니다. 승진이나 연봉인상을 꿈꾸면 승진과 연봉인상을 시켜주는 회사에 능력을 과시해야 합니다. IT인증시험은 국제적으로 승인해주는 자격증을 취득하는 시험입니다. DumpTOP의Autodesk인증 BIM_MGT_101덤프의 도움으로 Autodesk인증 BIM_MGT_101시험을 패스하여 자격증을 취득하면 승진이나 연봉인상의 꿈이 이루어집니다. 결코 꿈은 이루어질것입니다.
질문 # 45
Refer to the exhibits.
The firm's technical group would like to show demolished elements as dashed red in all future projects. The BIM manager is updating the Revit template to meet this new standard.
Which Phase Graphic Override will accomplish this?
정답：C
설명：
Exhibit 1 correctly assigns a red dashed line pattern to the Demolished phase status for both Projection/Surface Lines and Cut Lines. This is required because demolished elements may appear either in projection or in section, depending on the view orientation and whether the element is intersected by the view's cut plane.
Configuring only Projection/Surface Lines would leave demolished elements displayed differently when cut. Conversely, changing only Cut Lines would not produce the required standard in elevations, plans, or other views where the elements are viewed in projection. The phase graphic override must therefore consistently define the colour and line pattern in both graphical conditions.
This setting belongs in the firm's Revit project template so that future projects inherit the standard. The corresponding phase filters must also be configured to apply the Demolished override in relevant demolition and construction views. A graphic override does not operate independently; the active phase and phase filter determine whether an element is classified and displayed as existing, demolished, new, or temporary.
Reference topics: Revit phasing; Phase Graphic Overrides; demolished-element standards; phase filters; projection and cut graphics; corporate project templates.
질문 # 46
During a project onboarding meeting, the client provides their current BIM standards and templates to the BIM manager. The project will involve multiple consultants across different regions and is being delivered under a fast-track schedule with a high volume of design iterations. The client has also indicated that they plan to use a new collaboration platform not previously piloted on similar project types.
The BIM manager must evaluate whether the client's materials are sufficient and aligned with digital-delivery expectations, collaboration goals, and coordination requirements.
Given these factors, which two of the client's BIM resources must be prioritized for review to evaluate their ability to support digital delivery and coordination across regions, teams, and time constraints? (Select two.)
정답：A,C
설명：
The BIM manager should first test whether the client's data definitions and templates can support consistent production across all participating regions and disciplines. Shared-parameter files and naming conventions must be reviewed because inconsistent parameter definitions, duplicate identifiers, regional naming variations, or conflicting classifications can compromise schedules, model checking, data exports, and asset-information delivery.
The project templates must also be evaluated for units, naming structures, view organization, browser conventions, coordinates, and other coordination-critical settings. On a fast-track project, deficiencies in these baseline resources will be replicated rapidly across many models and become expensive to correct after production begins.
Training and software access are valid mobilization concerns, particularly with a new collaboration platform, but they do not establish whether the client's actual BIM standards and templates are technically coherent. Sample sheets and title blocks primarily reveal graphical preferences rather than digital-delivery capability. Allowing unrestricted discipline customization would weaken standardization and increase coordination risk.
Options A and B directly assess whether the client's existing resources provide a consistent data and model-authoring foundation for distributed, high-velocity delivery.
Reference topics: Client-standard assessment; template validation; shared-parameter governance; naming conventions; regional consistency; project mobilization.
질문 # 47
A new project being set up requires consistency across all floor plans. However, because of variations in floor-to-floor heights, the project team needs a different View Range for each level.
What is the most efficient way to accommodate this?
정답：D
설명：
The project should retain a common View Template for consistent graphics, visibility, filters, discipline settings, detail level, and other documentation standards, while excluding View Range from the parameters controlled by that template. Deselecting the corresponding Include checkbox allows each floor-plan view to maintain a level-specific View Range without losing the other standardized template settings.
Plan Regions are intended for localized conditions within a plan, such as a raised platform, clerestory, split level, or isolated area requiring a different cut plane. They are not an efficient substitute when the entire floor requires a different View Range because its floor-to-floor height differs from other levels.
Removing the View Template would weaken graphical and documentation consistency. Visibility/Graphics also does not control the View Range; it controls the visibility and appearance of categories and elements. Creating a separate template for every floor would produce unnecessary template proliferation and increase maintenance risk because future standard changes would need to be repeated across numerous nearly identical templates.
Excluding only the variable parameter provides the correct balance between corporate standardization and project-specific view configuration.
Reference topics: View Templates; View Range; template-controlled parameters; Plan Regions; floor-plan standards; graphical consistency.
질문 # 48
The BIM manager received a subcontractor's 3D model containing specialty equipment to be integrated into the federated model. Upon review, they observe that:
Many elements lack consistent object styles and category assignments.
Some components are modelled with excessive detail, affecting performance.
Embedded data does not follow the project's naming conventions outlined in the BEP.
What is the most appropriate next step when evaluating this geometry and content?
정답：A
설명：
The BIM manager should perform a formal compliance review against the BIM Execution Plan, model-content standard, information requirements, and applicable element or classification matrix. Each nonconforming condition should be documented clearly, including incorrect category assignments, inconsistent object styles, excessive geometric detail, missing parameters, invalid naming, and unsuitable data structures.
The subcontractor should then receive a controlled revision request identifying the required corrections and resubmission criteria. Geometry should be simplified to the level needed for coordination and downstream use, but required metadata, classifications, connection points, clearances, and asset information must be retained. Optimization and information compliance are parallel requirements, not competing alternatives.
Approving the model unchanged would introduce performance and data-quality defects into the federation and could cause unreliable clash results, scheduling errors, or handover deficiencies. Hiding excessive detail with view filters changes only its visibility; the underlying geometry and data remain noncompliant and continue to affect model processing. Instructing the subcontractor to reduce file size regardless of information loss also fails the project's deliverable requirements.
Acceptance should occur only after the revised model passes the defined quality-control checks.
Reference topics: Content standards; subcontractor deliverables; model acceptance criteria; geometry optimization; classification and metadata; BEP compliance; quality-control reporting.
질문 # 49
A museum project anticipating generative iterations is being designed by a team working across multiple time zones under a tight schedule. The client hosts weekly meetings to review various facade options, document sustainability goals, and evaluate numerous energy analyses.
What project-specific training should the design technology team provide to prepare the team for client meetings and ensure successful project execution?
정답：D
설명：
The training programme should focus on the technologies directly supporting iterative option generation, environmental evaluation, and cloud-based stakeholder review. Generative-design methods allow the team to systematically explore multiple facade or planning alternatives using defined goals, constraints, and measurable outcomes. This is more appropriate than manually producing disconnected options under a compressed schedule.
Autodesk Forma and its site-design capabilities support early-stage design development, option comparison, contextual review, and environmental analysis. These workflows are particularly valuable for a geographically distributed team because design alternatives and analysis results can be prepared consistently for recurring client meetings. Training should include option creation, analysis interpretation, naming and version conventions, presentation workflows, and the method for documenting decisions against the client's sustainability criteria.
AutoCAD and Civil 3D are not the principal tools required for the stated facade-option and energy-analysis workflow. Sustainability certification training may be beneficial at an organizational level, but it does not replace practical project-specific instruction in the applications and computational methods the team must operate each week.
Reference topics: Project technology assessment; Autodesk Forma; Forma Site Design; generative design; environmental analysis; distributed-team training; design-option evaluation.
질문 # 50
......
Autodesk인증 BIM_MGT_101시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. DumpTOP에서 연구제작한 Autodesk인증 BIM_MGT_101덤프는Autodesk인증 BIM_MGT_101시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. DumpTOP덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은DumpTOP가 지켜드립니다.
BIM_MGT_101최신 업데이트버전 인증시험자료: https://www.dumptop.com/Autodesk/BIM_MGT_101-dump.html