The TestValid is a leading platform that is committed to offering to make Microsoft Exam Questions preparation simple, smart, and successful. To achieve this objective TestValid has got the services of experienced and qualified Microsoft AZ-802 Exam trainers. They work together and put all their efforts and ensure the top standard of TestValid Microsoft AZ-802 exam dumps all the time.
| Section | Objectives |
|---|---|
| Secure Windows Server hybrid infrastructures | - Security configuration
|
| Manage hybrid compute and virtualization | - Containers
|
| Disaster recovery and migration | - Migration scenarios
|
| Implement and manage high availability | - Load balancing and redundancy
|
| Monitoring and troubleshooting | - System monitoring
|
| Networking and storage infrastructure | - Networking
|
Thanks to modern technology, learning online gives people access to a wider range of knowledge, and people have got used to convenience of electronic equipment. As you can see, we are selling our AZ-802 learning guide in the international market, thus there are three different versions of our AZ-802 exam materials: PDF, Soft and APP versions. It is worth mentioning that, the simulation test of our AZ-802 Study Guide is available in our software version. With the simulation test, all of our customers will get accustomed to the AZ-802 exam easily, and pass the exam with confidence.
NEW QUESTION # 24
You have 10 servers that run Windows Server in a workgroup. You need to configure the servers to encrypt all the network traffic between the servers. The solution must be as secure as possible. Which authentication method should you configure in a connection security rule?
Answer: D
Explanation:
Because the ten servers are in a workgroup rather than joined to an Active Directory domain, Kerberos V5 is not usable as an authentication method for a connection security rule, since Kerberos V5 depends on a domain controller acting as the Key Distribution Center, which workgroup servers do not have access to. Of the remaining options actually usable in a workgroup, a computer certificate issued from a trusted certification authority provides much stronger, mutually verifiable authentication than either a shared pre-shared key or NTLMv2. Windows Defender Firewall with Advanced Security guidance explicitly identifies pre-shared keys and NTLM-based authentication as weaker fallback methods appropriate only when certificates or Kerberos are unavailable, precisely because a pre-shared key is a single shared secret with no per-computer identity verification and NTLMv2 is an older, less robust protocol vulnerable to several known attack classes.
Certificate-based authentication, by contrast, lets each server present its own distinct, verifiable identity, making it the most secure choice available for encrypting workgroup server-to-server traffic. Therefore, computer certificate authentication is the correct choice.
NEW QUESTION # 25
You have an Azure subscription that contains an Azure key vault named Vault1.
You plan to deploy a virtual machine named VM1 that will run Windows Server.
You need to enable encryption at host for VM1. The solution must use customer-managed keys.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. Create a disk encryption set and generate RSA keys. 2. Grant Vault1 the managed identity permission for the disk encryption set. 3. Create VM1 and associate the disks of the virtual machine with the disk encryption set.
To enable encryption at host on a new Windows Server virtual machine using a customer-managed key rather than a platform-managed one, the first step is to create a disk encryption set that references, or generates, an RSA key stored in Vault1; creating the disk encryption set automatically provisions its own system-assigned managed identity as part of that creation, so no identity needs to be separately enabled on VM1 itself for this purpose. The administrator then grants that disk encryption set ' s own managed identity the necessary key permissions on Vault1, specifically get, wrap key, and unwrap key, which is what actually authorizes the encryption set to use the customer-managed key stored there for encrypting and decrypting data. Only after the encryption set has been created and properly authorized against Vault1 does the administrator create VM1 itself, enable encryption at host on it, and associate its OS and data disks with the already-configured disk encryption set, which is the step that actually applies customer-managed-key encryption to the virtual machine ' s disks and its host cache and temporary storage. Assigning the Virtual Machine Contributor role to a managed identity plays no part in this particular key-management workflow at all.
NEW QUESTION # 26
You deploy a single-domain Active Directory Domain Services (AD DS) forest named contoso.com. You deploy five servers to the domain. You add the servers to a group named NLBHosts. You plan to configure a Network Load Balancing (NLB) cluster named NLBCluster.contoso.com that will contain the five servers.
You need to ensure that the NLB service on the nodes of the cluster can use a group managed service account (gMSA) to authenticate. Which three PowerShell cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. Add-KdsRootKey 2. New-ADServiceAccount 3. Install-ADServiceAccount
Before any group managed service account can be created in a forest, the Key Distribution Service root key must exist, since it supplies the key material the KDS uses to compute and periodically roll the gMSA ' s password; this is created once with Add-KdsRootKey. Next, New-ADServiceAccount creates the actual gMSA object, and its -PrincipalsAllowedToRetrieveManagedPassword parameter can be pointed directly at the existing NLBHosts group, which authorizes all five NLB nodes to retrieve the managed password in a single step, without needing to grant permission to each computer individually. Finally, Install- ADServiceAccount must be run locally on each of the five NLB nodes to actually install and cache the gMSA account on that computer, which is what allows the NLB service running there to authenticate as the gMSA.
Set-KdsConfiguration adjusts advanced KDS server- side settings and is not a required step in standard gMSA provisioning. Add-ADGroupMember would only be needed if authorization were being granted by adding individual computer accounts to a security group after the fact, which is unnecessary here since the group already exists and is referenced directly. Add-ADComputerServiceAccount associates a computer with a standalone (non-group) managed service account and does not apply to gMSA scenarios like this one.
NEW QUESTION # 27
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1. Users cannot sign in to Server1 by using domain credentials and receive the following error message: The trust relationship between this workstation and the primary domain failed. You need to restore domain authentication on Server1 without removing Server1 from the domain.
Solution: From Server1, you run Add-Computer -DomainName contoso.com -Server DC1. Does this meet the goal?
Answer: B
Explanation:
Running Add-Computer -DomainName contoso.com -Server DC1 against domain administrator credentials from a computer that is already a member of contoso.com re-establishes Server1 ' s domain membership against the specified domain controller: rather than requiring an explicit prior removal from the domain, the join operation detects the existing computer account for Server1 in AD DS, and with appropriate rights re- associates Server1 with that account, resetting and resynchronizing the computer account ' s password on both Server1 and DC1 as part of completing the join, which repairs the same underlying password mismatch responsible for the trust relationship failed error. Because the account itself is reused (not deleted and recreated) and Server1 remains continuously a member computer object of contoso.com throughout the operation, this satisfies the requirement to restore authentication without removing Server1 from the domain, even though the mechanism is a rejoin-style operation rather than a dedicated secure-channel-repair cmdlet. In practice, this is a commonly documented alternate remediation for a broken secure channel when Test- ComputerSecureChannel -Repair or Reset-ComputerMachinePassword are unavailable or insufficient, since the join process inherently resets the shared password consistently on both sides, restoring the secure channel and domain authentication on Server1 without any domain-wide or server-wide configuration changes and without an explicit disjoin step.
NEW QUESTION # 28
You have an on-premises server named Server1 that runs Windows Server and has internet connectivity. You have an Azure subscription. You need to monitor Server1 by using Azure Monitor. Which resources should you create in the subscription, and what should you install on Server1? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
In the subscription, create: a Log Analytics workspace. On Server1, install: the Azure Monitor agent.
Azure Monitor collects and analyzes telemetry through Log Analytics workspaces, which are the destination data store for the logs and performance counters that monitored machines send. Because Server1 is on- premises but has internet connectivity, it does not need to be Arc-onboarded merely to send monitoring telemetry via Azure Monitor Agent (AMA) using Microsoft Entra-based or token authentication; the essential subscription-side resource that must exist first is the Log Analytics workspace that will store the collected data and against which data collection rules and queries are defined. On the server side, the Azure Monitor agent is the current, supported agent for collecting events, performance counters, and logs from Windows and Linux machines, whether they are Azure VMs, on-premises servers, or Arc-enabled servers, and forwarding that data to the configured Log Analytics workspace through an associated data collection rule. The distractor options do not fit this scenario: an Azure Files storage account and Azure SQL Database/Blob Storage accounts are unrelated data stores that Azure Monitor does not use as its telemetry destination; the Analytics gateway is a Power BI on-premises data gateway component, not a monitoring agent; and the Device Health Attestation server role is a Windows feature for validating device boot-time security state, unrelated to Azure Monitor telemetry collection. Creating the workspace and installing the Azure Monitor agent together is what is needed to monitor Server1.
NEW QUESTION # 29
......
It is not hard to know that Administering Windows Server torrent prep is compiled by hundreds of industry experts based on the syllabus and development trends of industries that contain all the key points that may be involved in the examination. Therefore, with AZ-802 exam questions, you no longer need to purchase any other review materials, and you also don’t need to spend a lot of money on tutoring classes. At the same time, AZ-802 Test Guide will provide you with very flexible learning time in order to help you pass the exam.
AZ-802 Practice Mock: https://www.testvalid.com/AZ-802-exam-collection.html