BTW, DOWNLOAD part of EduDump NSE6_EDR_AD-7.0 dumps from Cloud Storage: https://drive.google.com/open?id=1VJx4bVkU6cPRIozKQfvK-BOYLh7-tD4x
As job seekers looking for the turning point of their lives, it is widely known that the workers of recruitment is like choosing apples---viewing resumes is liking picking up apples, employers can decide whether candidates are qualified by the NSE6_EDR_AD-7.0 appearances, or in other words, candidates’ educational background and relating NSE6_EDR_AD-7.0 professional skills. They develop the NSE6_EDR_AD-7.0 exam guide targeted to real exam. The wide coverage of important knowledge points in our NSE6_EDR_AD-7.0 latest braindumps would be greatly helpful for you to pass the exam.
| Section | Weight | Objectives |
|---|---|---|
| FortiEDR System Architecture and Deployment | 25% | - Multi-tenancy deployment - Installation and deployment process - Architecture and technical positioning - API-based management operations - Inventory management and system tools |
| Events, Forensics, and Threat Hunting | 25% | - Threat hunting profiles and queries - Forensic analysis and incident investigation - Security event and alert analysis - Threat hunting data interpretation |
| Monitoring and Troubleshooting | 10% | - System monitoring and health checks - Log and alert troubleshooting - Performance and issue diagnosis |
| Security Settings and Policies | 25% | - Security policies configuration - Playbooks creation and management - Fortinet Cloud Service (FCS) integration - Communication control policies |
| Integration and Security Fabric | 15% | - Fortinet Security Fabric integration - FortiXDR deployment and configuration |
>> NSE6_EDR_AD-7.0 Test Cram Pdf <<
NSE6_EDR_AD-7.0 exam preparation also provide you a deep insight knowledge about the Fortinet NSE6_EDR_AD-7.0 exam topics. This knowledge will help you in Fortinet NSE6_EDR_AD-7.0 exam success and career. The Fortinet NSE6_EDR_AD-7.0 Exam Questions require some of your attention. You may use our Fortinet NSE6_EDR_AD-7.0 exam dumps to help you get ready for the real Fortinet NSE6_EDR_AD-7.0 exam.
NEW QUESTION # 27
Refer to the Exhibit:
Based on the FortiEDR status output shown in the exhibit, what are two reasons for the degraded state?
(Choose two answers)
Answer: A,B
Explanation:
The correct answers are B and C .
The exhibit shows:
FortiEDR Service: Up
FortiEDR Driver: Up
FortiEDR Status: Degraded (no configuration)
This means the local Collector service and driver are running, but the Collector has not received valid configuration. In FortiEDR, a Collector must register and communicate with the FortiEDR Aggregator to receive its configuration. The guide states that the Collector initially sends registration information to the FortiEDR Aggregator using SSL, sends ongoing health/status/security-event information, and receives its configuration from the Aggregator.
During installation, a non-customized Windows Collector requires the correct Aggregator address , Aggregator port 8081 , and registration password . The guide explicitly states that the Aggregator port should be specified as 8081 , and that the registration password must be entered during installation.
Therefore, an incorrect registration password or incorrect port number can prevent proper registration
/configuration retrieval, resulting in a degraded/no-configuration state.
Option A is not the best answer because Windows Firewall being enabled by itself does not automatically cause this FortiEDR status; only if it blocks required FortiEDR communication would it matter, and the option is too generic. Option D is also not correct as written because the Collector receives configuration from the Aggregator , not directly from the Central Manager. The guide describes Collector-to-Aggregator communication for registration and configuration.
=========
NEW QUESTION # 28
Refer to the exhibit.
Based on the exhibit, which statement about this threat hunting query is true? (Choose one answer)
Answer: C
Explanation:
The correct answer is A .
The exhibit shows a FortiEDR Threat Hunting saved query using RemotePort:3389, scoped to a specific device, with Scheduled Query enabled, classification set to Suspicious , and a repeat interval of 15 minutes .
TCP port 3389 is the standard RDP port, so the query is designed to detect RDP-related network activity for the selected endpoint.
The FortiEDR guide states that saving a Threat Hunting query can define it as a scheduled query to automate threat detection. It further states that when a scheduled query runs and detects matches, a security event is automatically created in the Incidents tab , and notifications are sent according to the security event configuration.
Option B is too absolute and therefore wrong. The specific query shown uses a network field, but Threat Hunting itself can search activity events across files, registry, network, processes, and event logs. Option C is wrong because the Community Query checkbox is not selected, so it is not configured as a shared community
/global query. The guide states that Community Query must be selected to share the query with the FortiEDR community, including other organizations.
Option D is wrong because a scheduled Threat Hunting query generates an incident; it does not automatically block RDP unless additional playbook actions are configured. The guide says scheduled queries generate security events and may trigger configured playbook actions, but the query itself is not a blocking control.
=========
NEW QUESTION # 29
Refer to the Exhibit:
Based on the incident details shown in the exhibit, which two statements about this incident are true? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are A and C .
The exhibit shows an audit/response action stating that IP address 74.125.235.20 was added to malicious IP addresses on firewall FortiGate . This matches the FortiEDR playbook action Block address on Firewall .
The guide states that this action ensures connections to remote malicious addresses associated with the security event are blocked, and that a firewall connector must already be configured for this action. It also explains that a checkmark in a classification column means communication with the affected destination is automatically blocked when a security event with that classification is triggered.
Option C is the second best answer because FortiEDR events are initially classified by FortiEDR detection logic/Core, and the guide states that classifications are initially determined by the Core but can later be changed automatically by FortiEDR Cloud Service or manually. The exhibit shows "Classification Changed To: Suspicious (By Fortinet)" , but it does not say the event was manually classified by an administrator. So the event classification process is FortiEDR-driven, with later Fortinet/FCS-style automatic classification possible.
Option B is wrong. The exhibit shows one raw-data row with device cwinserv-32 +2 , which indicates more than one affected device/raw item is represented in the aggregation. So it did not occur on only one device.
Option D is wrong because the incident rows clearly show Unhandled . The guide states that security events are initially marked as unread and unhandled, and the unread/unhandled status helps users track whether anyone has read and handled the event.
=========
NEW QUESTION # 30
Refer to the exhibit.
Based on the event shown in the exhibit, which two statements about the event are true? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are B and C .
The exhibit shows the event classification as Malicious . In FortiEDR, event classification can be performed by the Core and later updated by FortiEDR Cloud Service (FCS) . The guide states that the audit history shows the classification chronology and includes details when FCS reclassifies a security event after the Core' s initial classification. It also states that notifications can be based on either Core or FCS classification depending on whether FCS classification is received within the timeout period.
The exhibit also shows TestApplication.exe with Status: Running . That means the process was launched and is currently running on the endpoint. Therefore, C is correct.
Option A is wrong because the exhibit clearly shows Status: Unhandled , not Handled. The guide states that FortiEDR security events are initially marked as unread and unhandled, and users can later mark them handled through the incident handling workflow.
Option D is wrong because the exhibit shows rule indicators such as Invalid Checksum , Suspicious Packer
, and Writable Code , but it does not prove that TestApplication.exe is "sophisticated malware." FortiEDR classifies the event as malicious, but the guide's Malicious classification means the event is verified to have malicious capability, is intended to harm the infected device, and has no commercially viable use; the exhibit alone does not justify the stronger claim "sophisticated malware."
=========
NEW QUESTION # 31
Refer to the Exhibit:
Based on the event shown in the exhibit, which two statements about the event are true? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are A and B .
The exhibit shows the event classification as Malicious , classified by FortinetCloudServices , and the history states that device R2D2-kvm63 was moved from the Training Collector Group to the High Security Collector Group . This is a Playbook action. The FortiEDR guide explains that after classification changes, the Overview pane displays the history of automatic FortiEDR actions, including Playbook policy-related actions .
The guide specifically lists Move device to High Security Group under Investigation actions in Playbook policies. It states that a checkmark in a classification column means the device is automatically moved to the High Security Collector Group when a security event with that classification is triggered. So the exhibit proves that Playbooks are configured for this event.
The second correct answer is B because the triggered rule is under Training * Extended Detection . The FortiEDR guide states that the eXtended Detection Policy logs events and displays them in the Incidents tab, but no blocking options are provided for this policy.
Option C is wrong because moving a device to the High Security Collector Group is not the same as isolating the device. Isolation would block communication to/from the affected Collector. The exhibit shows a Collector Group move, not isolation.
Option D is wrong because Extended Detection does not block. The guide explicitly says Extended Detection events are logged and displayed, with no blocking options provided.
=========
NEW QUESTION # 32
......
In your day-to-day life, things look like same all the time. Sometimes you feel the life is so tired, do the same things again and again every day. Doing the same things and living on the same life make you very bored. So hurry to prepare for NSE6_EDR_AD-7.0 exam, we believe that our NSE6_EDR_AD-7.0 exam braindumps will help you change your present life. It is possible for you to start your new and meaningful life in the near future, if you can pass the Fortinet exam and get the certification. So it is very important for you to prepare for the practice exam, you must pay more attention to the NSE6_EDR_AD-7.0 Certification guide to help you.
Dumps NSE6_EDR_AD-7.0 Reviews: https://www.edudump.com/exams/Fortinet/NSE6_EDR_AD-7.0/
2026 Latest EduDump NSE6_EDR_AD-7.0 PDF Dumps and NSE6_EDR_AD-7.0 Exam Engine Free Share: https://drive.google.com/open?id=1VJx4bVkU6cPRIozKQfvK-BOYLh7-tD4x