Our AZ-802 exam questions are related to test standards and are made in the form of actual tests. Whether you are newbie or experienced exam candidates, our AZ-802 study guide will relieve you of tremendous pressure and help you conquer the difficulties with efficiency. If you study with our AZ-802 Practice Engine for 20 to 30 hours, we can claim that you can pass the exam as easy as a pie. Why not have a try?
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Secure Windows Server on-premises and hybrid infrastructures | 10% | - Configure Windows Defender and audit policies - Manage access control and permissions - Implement security baselines and hardening |
| Topic 2: Manage storage and file services | 15% | - Configure data deduplication and replication - Integrate on-premises storage with Azure Storage - Implement Storage Spaces and Storage Spaces Direct - Configure file servers and shares |
| Topic 3: Deploy and manage Active Directory Domain Services (AD DS) in on-premises and cloud environments | 20% | - Install and configure domain controllers - Implement and manage Group Policy Objects - Integrate AD DS with Azure AD and Azure Arc - Manage FSMO roles and replication |
| Topic 4: Manage virtual machines and containers | 15% | - Deploy and manage containers and Kubernetes on Windows Server - Deploy and manage Hyper-V virtual machines - Configure Azure Arc-enabled servers and VMs |
| Topic 5: Manage Windows Servers and workloads in a hybrid environment | 20% | - Deploy servers using Windows Admin Center and Azure Arc - Implement hybrid identity solutions - Manage updates and patches across hybrid servers - Configure remote management and secure administration |
| Topic 6: Implement high availability and disaster recovery | 5% | - Perform server and workload migrations - Configure failover clustering - Implement backup and recovery solutions - Monitor and troubleshoot Windows Server environments - Use Azure Site Recovery for hybrid workloads |
| Topic 7: Implement and manage an on-premises and hybrid networking infrastructure | 15% | - Configure software-defined networking - Implement hybrid network connectivity - Secure network traffic in hybrid environments - Configure IP addressing, DNS, and DHCP |
>> Microsoft AZ-802 Test Vce Free <<
PremiumVCEDump will give you confidence to pass Microsoft AZ-802 test. Our Exam Preparation Material provides you everything the candidates will need to get the AZ-802 certification. Our Microsoft AZ-802 will provide you with exam questions with verified answers that reflect the actual exam. These questions and answers will help you to do preparation for taking a certification examination. High quality and Value for the AZ-802 Exam: 100% guarantee to Pass Your Microsoft AZ-802 exam and get your certification.
NEW QUESTION # 434
You have a server that runs Windows Server 2022 and has the network adapters shown in the following table:
LAN1 (Vendor1, 1 Gbps, RDMA: No), LAN2 (Vendor2, 25 Gbps, RDMA: Yes), LAN3 (Vendor3, 25 Gbps, RDMA: Yes), LAN4 (Vendor4, 1 Gbps, RDMA: No). You need to configure NIC teaming for LAN2 and LAN3. The solution must support Dynamic Virtual Machine Multi-Queue (d.VMMQ). What should you use?
Network adapter table
Answer: D
Explanation:
Switch Embedded Teaming (SET) is the only Windows Server NIC teaming technology that preserves each member adapter ' s RDMA capability and supports Dynamic VMMQ, because SET is implemented as an integrated capability of the Hyper-V virtual switch itself rather than as a separate teaming driver layered underneath it; this integration lets SET-teamed adapters continue to expose RDMA and advanced offloads such as d.VMMQ to the virtual switch and its VMQ/VMMQ queue allocation logic. The legacy NIC Teaming feature -- also called load balancing and failover (LBFO), which includes both static teaming mode and LACP teaming mode as configuration options -- sits below the virtual switch as a separate intermediate driver and explicitly does not support RDMA passthrough or Dynamic VMMQ on its member adapters; teaming LAN2 and LAN3 (both RDMA-capable, 25 Gbps adapters) with classic LBFO would strip their RDMA capability entirely, defeating both the RDMA benefit and the d.VMMQ requirement. Since LAN2 and LAN3 are both RDMA-capable adapters and the requirement explicitly calls for Dynamic VMMQ support, Switch Embedded Teaming is the only option among those listed that meets the requirement; static teaming mode and LACP teaming mode are simply LBFO configuration variants and share the same RDMA/d.VMMQ incompatibility.
NEW QUESTION # 435
You have a Windows Server 2022 Storage Spaces Direct cluster named Cluster1. Cluster1 has four nodes that contain virtual machines.
You need to perform an in-place upgrade of Cluster! to Windows Server 2025. The solution must ensure that the virtual machines are always available during the upgrade.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
To keep virtual machines available while performing an in-place OS upgrade of a Storage Spaces Direct node, the node is first paused and drained (Suspend-ClusterNode -Drain) so its cluster roles, including running VMs, move to other nodes. The node ' s storage is then placed into storage maintenance mode, which stops it from participating in the storage pool ' s redundancy operations while its physical disks are offline for the upgrade. With the node drained and its storage quiesced, the in-place Windows Server 2025 upgrade is performed, and afterward storage maintenance mode is removed so the node ' s disks rejoin the pool and Storage Spaces Direct resynchronizes data before the node resumes cluster roles. This drain-upgrade-resync cycle is then repeated node by node across the four-node cluster, and because only one node at a time is unavailable while the others continue serving storage and hosting migrated VMs, the workload stays online throughout the entire rolling upgrade.
NEW QUESTION # 436
You have a failover cluster named Cluster1 that contains three nodes. You plan to add two file server cluster roles named File1 and File2 to Cluster1. File1 will use the File Server for general use role. File2 will use the Scale-Out File Server for application data role. What is the maximum number of nodes for File1 and File2 that can concurrently serve client connections? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
File1: 1. File2: 3.
A File Server for general use cluster role runs in an active-passive configuration: only the single node that currently owns the role can service client connections at any given time, so File1 is limited to one active node at most, regardless of how many total nodes Cluster1 has. A Scale-Out File Server for application data role, by contrast, is purpose-built for continuous availability and allows every node in the cluster to simultaneously own and serve the same shares concurrently over SMB Transparent Failover, so File2 can use all three nodes in Cluster1 at once to serve client connections. This distinction is fundamental to selecting the correct file server role for a given workload: general-use file shares favor the simplicity of standard active-passive failover, while application workloads such as Hyper-V over SMB or SQL Server database files benefit from the scale-out role ' s concurrent, multi-node access pattern and higher aggregate throughput. Therefore, File1 tops out at 1 node while File2 can use all 3 nodes concurrently.
NEW QUESTION # 437
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains the servers shown in the following table.
The Failover Clustering tools are NOT installed on the servers.
You plan to enable Cluster-Aware Updating (CAU).
On which servers should you install the Failover Clustering tools to implement CAU in self-updating mode, and on which servers should you install the Failover Clustering tools to implement remote-updating mode? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Exhibit
Answer:
Explanation:
Explanation:
Self-updating mode runs Cluster-Aware Updating as a highly available clustered role that is hosted directly on the cluster it is updating, which means the Cluster-Aware Updating clustered role and the Failover Clustering Tools it depends on must be installed on the cluster ' s own member nodes, which in this scenario are Node1 and Node2, since self-updating mode has no external coordinating computer and instead runs the update orchestration from within the cluster itself. Remote-updating mode works in the opposite way architecturally:
it specifically requires that the computer coordinating and triggering the update run NOT be a member of the failover cluster being updated, so in this scenario the Failover Clustering Tools must instead be installed on Server1, which is an independent member server that has network connectivity to Cluster1 but is not one of its nodes, so it can safely coordinate updates against the cluster from the outside. This architectural split, tools on the cluster ' s own nodes for self-updating mode versus tools on an external, non-member computer for remote-updating mode, reflects the fundamental difference in where the update orchestration engine actually runs between the two CAU modes as documented by Microsoft, and it is what determines the correct answer for each half of this question.
NEW QUESTION # 438
You need to meet the technical requirements for User1. The solution must use the principle of least privilege.
What should you do?
Answer: B
Explanation:
The requirement is narrow: User1 must be able to manage the membership of all the groups located in Contoso\OU3, and nothing more. The Delegation of Control Wizard, run against OU3 specifically, lets an administrator grant User1 exactly the built-in task " Modify the membership of a group, " which grants write access to the member attribute on group objects contained in that OU only. This satisfies the requirement while granting no rights outside OU3, which is the definition of least privilege. Creating the same delegation at the domain root (contoso.com) would technically work but grants far broader scope than needed, since it would apply to every container in the domain, not just OU3, violating least privilege. Adding User1 to Account Operators grants domain-wide rights to create, delete, and modify most user, group, and computer accounts throughout the domain (with some protections for built-in admin accounts), which is excessive for a task limited to group membership in one OU. Server Operators is unrelated to Active Directory object management altogether; it governs local administrative rights on domain controllers themselves. Therefore, delegating control on OU3 is the correct, minimally scoped solution.
NEW QUESTION # 439
......
We know that it is hard to stay and study for the Administering Windows Server (AZ-802) exam dumps in one place for a long time. Therefore, you have the option to use Administering Windows Server (AZ-802) PDF questions anywhere and anytime. PremiumVCEDump Administering Windows Server (AZ-802) dumps are designed according to the Microsoft AZ-802 certification exam standard and have hundreds of questions similar to the actual Administering Windows Server (AZ-802) exam.
New AZ-802 Test Book: https://www.premiumvcedump.com/Microsoft/valid-AZ-802-premium-vce-exam-dumps.html