Die Fragenkataloge von Fortinet NSEI_OTS_AR-7.6 von unserem PrüfungFrage existieren in der Form von PDF und Stimulationssoftware. Wir aktualisieren unsere Materialien regelmäßig, so dass Sie immer die aktuellen und genauen Informationen über die Fragenkataloge von Fortinet NSEI_OTS_AR-7.6 erhalten können. Nach langjährigen Bemühungen haben unsere Erfolgsquote von der Fortinet NSEI_OTS_AR-7.6 Zertifizierungsprüfung 100% erreicht.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Monitoring and Risk Assessment | 25% | - Event handling and logging with FortiAnalyzer 7.6 - OT-focused risk assessment and management - Threat detection using FortiSIEM 7.4 |
| Topic 2: Asset Management | 25% | - Device detection and inventory using FortiGate & FortiNAC - Fortinet Security Fabric for OT environments - OT security standards and compliance (IEC 62443, NIST) |
| Topic 3: Network Access Control | 25% | - Purdue Model and secure network segmentation - OT Ethernet and industrial communication models - Authentication and access policies for OT devices |
| Topic 4: Network Security | 25% | - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Virtual patching for legacy OT systems |
>> NSEI_OTS_AR-7.6 Prüfungsvorbereitung <<
Wenn Sie IT-Industrie auswählen, wählen Sie nämlich die gutbezahlte Arbeit und bessere Aussichten. Deshalb wollen immer mehr Leute das IT-Zertifikat besitzen. Und heute nehmen immer mehr Leute an Fortinet NSEI_OTS_AR-7.6 Zertifizierungsprüfung teil. Und wir PrüfungFrage bieten Kadidaten die echten Prüfungsfragen und -antworten mit günstigen Preisen und höher Qualität. Und Wir PrüfungFrage bieten Ihnen einjährigen kostlosen Aktualisierungsservice. Und unsere NSEI_OTS_AR-7.6 Prüfungsunterlagen sind schon bereit. Wir PrüfungFrage sind der führende Lieferant der Prüfungsunterlagen. Wir haben die neuesten und die richtigsten Fortinet NSEI_OTS_AR-7.6 Zertifizierungsunterlagen, nämlich die Prüfungsfragen und die Testantworten.
40. Frage
Refer to the exhibit.
A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)
Antwort: C,D
Begründung:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .
41. Frage
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)
Antwort: C,D
Begründung:
According to the OT Security 7.6 Architect study guide section on Asset Management , specifically regarding FortiNAC Visibility :
* Layer 2 Polling Data : Because each physical address is unique, FortiNAC identifies hosts as they connect to the network. The information gathered during this process fills in the physical address and location information in the database.
* Visibility Components : The guide states that the physical address learned , the time it was learned , and where it was learned from provide the foundation of endpoint visibility in the form of " what, where, and when " information. This confirms that Where it was learned (Option A) and The time it was learned (Option D) are correct.
* Exclusions :
* Layer 3 Polling : The MAC-to-IP correlation (Option B) is explicitly defined as a function of Layer 3 polling , where the correlated IP address is added to the database record for the corresponding MAC address.
* DHCP Fingerprinting : The host name or system name (Option C) and the operating system are gathered via DHCP fingerprinting , not layer 2 polling.
42. Frage
Refer to the exhibit.
A partial OT network is shown.
You have recently removed the air gap in the network to provide full connectivity.
What must you configure to protect your OT network from external attacks?
Antwort: B
Begründung:
The correct answer is D . Removing the air gap creates connectivity between the OT environment and external networks, significantly increasing exposure to unauthorized access and cyberattacks. Fortinet explains that the expansion of remote connectivity and IT/OT interconnections increases the OT attack surface and that the modern threat landscape requires IPS to block a wider range of threats . In the shown Purdue-style topology, FortiGate_Level5 is positioned at the upper boundary toward external connectivity and is therefore the appropriate enforcement point for protecting against attacks entering from outside the OT environment. Virtual patching at Level 2 is intended primarily to compensate for known vulnerabilities on specific OT devices that cannot yet be patched. Application Control provides industrial protocol visibility and command-level control, while merely enabling OT signatures at Level 3 does not replace perimeter intrusion prevention. Consequently, IPS belongs on FortiGate_Level5 .
43. Frage
Refer to the exhibits.
A partial Basic Event Handler page on FortiAnalyzer and the creation of a trigger in a FortiGate device are shown. To improve the protection of your OT network, you want to automate the handling of compromised devices notified through FortiAnalyzer. You have configured an event handler named Alert_trigger as shown in the exhibit. When you create the trigger on the FortiGate device, the Event handler name field does not provide the Alert_trigger option. What two actions must you perform to make the Alert_trigger option available? (Choose two answers)
Antwort: A,B
Begründung:
The correct answers are C and D .
Option C is correct because the study guide explains that when "a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" and, in the Security Fabric workflow, "FortiAnalyzer parses the logs and notifies the root FortiGate." This means FortiGate must first have the FortiAnalyzer connection configured so it can consume FortiAnalyzer event handlers and use them in automation. The wizard message in the exhibit also points to this requirement by indicating that a FortiAnalyzer connection must be configured.
Option D is also correct because the study guide explicitly says that in this automation flow "the root FortiGate triggers the action" and shows "Stitches configured on root FortiGate." Therefore, if you want the FortiAnalyzer event handler to appear and be usable for automation, the trigger must be configured on the root FortiGate , not on an arbitrary downstream FortiGate.
Option A is incorrect because + Create is only a GUI control and does not solve the missing-event-handler visibility problem. Option B is not identified in the study guide as the requirement for making a FortiAnalyzer event handler available in the FortiGate automation trigger list.
44. Frage
Refer to the exhibit.
An industrial Ethernet protocol skipping layers 3 to 6 is shown. Which industrial Ethernet protocol is it?
(Choose one answer)
Antwort: C
Begründung:
The correct answer is D. EtherCAT . The study guide explicitly states under the Ethernet/IP and EtherCAT section that "EtherCAT is a protocol that offers real-time communication in a primary-secondary configuration" and "EtherCAT skips layers 3 to 6 to deliver real-time communication." It also adds that
"the most important feature of this protocol is that secondary devices collect only the information they need from the data packets." This matches the exhibit exactly, where the diagram shows Real-Time Data above a Proprietary MAC and Proprietary physical layer , reflecting the protocol structure that bypasses the intermediate OSI layers.
The other options do not match this behavior. The guide says POWERLINK uses layer 2 and layer 7 of the OSI model, not that it skips layers 3 to 6. It also explains that Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the OSI model. Modbus is described as an open client/server protocol and is not suitable for transmitting data in real time . Therefore, the protocol in the exhibit is clearly EtherCAT .
45. Frage
......
Wenn Sie die Fortinet NSEI_OTS_AR-7.6 Zertifizierungsprüfung bestehen, können Sie bestimmt größere Errungenschaften im Berufsleben erzielen. Wenn Sie PrüfungFrage wählen, können wir Ihnen sicherlich Freude wegen des Bestehens der Fortinet NSEI_OTS_AR-7.6 Zertifizierungsprüfung mitbringen. Kaufen Sie Prüfungsfragen und Antworten von PrüfungFrage, können wir Ihnen garantieren, dass Sie die Fortinet NSEI_OTS_AR-7.6 Zertifizierungsprüfung 100% bestehen können. Zugleich werden Sie auch einjährige Aktualisierung kostenlos genießen.
NSEI_OTS_AR-7.6 Fragenkatalog: https://www.pruefungfrage.de/NSEI_OTS_AR-7.6-dumps-deutsch.html