Nokia SRAN-Radio-Network-Performance-Optimization Exam Cost & SRAN-Radio-Network-Performance-Optimization Practice Braindumps

As the old saying goes people change with the times. People must constantly update their stocks of knowledge and improve their practical ability. Passing the test SRAN-Radio-Network-Performance-Optimization certification can help you achieve that and buying our SRAN-Radio-Network-Performance-Optimization test practice materials can help you pass the SRAN-Radio-Network-Performance-Optimization test smoothly. Our SRAN-Radio-Network-Performance-Optimization study question is superior to other same kinds of study materials in many aspects. Our SRAN-Radio-Network-Performance-Optimization test bank covers the entire syllabus of the test and all the possible questions which may appear in the test. You will pass the SRAN-Radio-Network-Performance-Optimization exam for sure.

Nokia SRAN-Radio-Network-Performance-Optimization Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Performance Troubleshooting	20-25%	- Root cause analysis methodologies - Network failure identification and resolution - Troubleshooting tools utilization - Common performance issues diagnosis - Optimization case studies
Topic 2: SRAN Optimization Tools and Reports	10-15%	- Configuration management for optimization - Report generation and interpretation - Nokia NetAct and performance tools - Automated optimization features
Topic 3: Radio Network Performance Monitoring	20-25%	- KPI definition and measurement - Real-time network monitoring techniques - Performance monitoring tools and dashboards - Performance data collection and analysis - Threshold configuration and alerting
Topic 4: SRAN Architecture and Fundamentals	15-20%	- SRAN solution components and functions - SRAN network architecture overview - Radio access concepts and principles - Single RAN integration principles
Topic 5: Radio Network Optimization Techniques	25-30%	- Parameter tuning best practices - Load balancing techniques - Capacity optimization strategies - Coverage optimization methods - Interference analysis and mitigation - Handover optimization

>> Nokia SRAN-Radio-Network-Performance-Optimization Exam Cost <<

100% Pass Quiz Nokia - SRAN-Radio-Network-Performance-Optimization - Pass-Sure MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 Exam Cost

There are many large and small platforms for selling examination materials in the market, which are dazzling, but most of them cannot guarantee sufficient safety and reliability. Are you worried about the security of your payment while browsing? SRAN-Radio-Network-Performance-Optimization Test Torrent can ensure the security of the purchase process, product download and installation safe and virus-free. If you have any doubt about this, we will provide you professional personnel to remotely guide the installation and use.

Nokia MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 Sample Questions (Q12-Q17):

NEW QUESTION # 12
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.

A. C
B. E
C. D
D. B

Answer: A

Explanation:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.

NEW QUESTION # 13
In a 5G NSA Option 3x deployment, why should we not define 5G neighbors in LTE sectors where there is no 5G coverage ?

A. All of the above.
B. There will be LTE throughput degradation due to measurement gap configuration.
C. There will be unnecessary SCG neighbors, which can cause 4G-to-SCG handover performance to become worse.
D. Many redirections from 5G to 4G will be observed.

Answer: B

Explanation:
The correct answer is A .
In 5G NSA Option 3x , LTE acts as the Master Cell Group , and NR acts as the Secondary Cell Group , usually added through EN-DC . If 5G NR neighbors are configured in an LTE sector where there is actually no 5G coverage , the LTE eNB may still configure the UE to perform NR measurements.
To perform NR inter-RAT or inter-frequency measurements, the UE may require measurement gaps .
During these gaps, the UE stops normal LTE reception/transmission activities to measure NR frequencies. If there is no real 5G coverage, those gaps become wasted measurement time and can reduce LTE user throughput.
Option B is not the best answer because if there is no 5G coverage, the main issue is not successful SCG addition or handover degradation, but unnecessary measurement activity. Option C is also not correct because redirection from 5G to 4G normally occurs when the UE is already on or connected to 5G coverage, which is not the case here.
Therefore, the main reason is:
LTE throughput degradation due to unnecessary measurement gap configuration.

NEW QUESTION # 14
Evaluate the impact of extended FR2 cell range on power consumption.

A. It decreases power consumption due to better radio conditions.
B. It reduces power consumption by optimizing beamforming.
C. It has no impact on power consumption.
D. It increases power consumption because UEs need more energy to transmit uplink signals.

Answer: D

Explanation:
The correct answer is C .
In FR2/mmWave , uplink coverage is often the limiting factor because UE transmit power is much lower than gNodeB transmit power, and mmWave propagation suffers from high path loss and blockage. Ericsson's mmWave coverage discussion also notes that high-band coverage is limited by uplink signal quality and high- band propagation characteristics.
When the FR2 cell range is extended, UEs farther from the serving cell must transmit uplink signals over a more difficult radio path. This usually requires higher UE transmit power, more robust MCS, more repetitions or retransmissions, and potentially longer uplink activity. As a result, UE battery consumption can increase.
Therefore, extended FR2 range generally:
Increases power consumption because UEs need more energy to transmit uplink signals.

NEW QUESTION # 15
In the case of 5G SA, which of the following triggers the Radio Link Failure, or RLF, handling mechanism?

A. gNodeB and UE indication timer
B. None of the above
C. UE indication timer only
D. gNodeB indication timer only

Answer: C

Explanation:
The correct answer is C.
In 5G SA, Radio Link Failure handling is mainly UE-driven. The UE monitors the radio link quality using lower-layer indications such as in-sync and out-of-sync indications. If the UE receives enough out-of-sync indications, it starts the relevant RLF timer, commonly associated with T310 behavior. If the link does not recover before the timer expires, the UE declares Radio Link Failure and starts recovery, such as RRC re- establishment.
The gNodeB can detect uplink problems and may release or reconfigure the UE, but the classical RLF handling mechanism is triggered at the UE side.
So the correct answer is:
UE indication timer only.

NEW QUESTION # 16
Which statement is not true about MantaRay SON ?

A. It has an open framework for module development.
B. Energy savings management is not covered.
C. It supports multi-vendor and multi-technology RAN.
D. It was previously known as EdenNet SON.

Answer: B

Explanation:
The correct answer is B .
The statement "Energy savings management is not covered" is not true . Nokia describes MantaRay SON as supporting radio network performance, quality, and energy efficiency optimization. Nokia also references AI-powered energy savings management and RAN energy efficiency use cases under its SON/MantaRay automation portfolio.
The other statements are aligned with Nokia SON/MantaRay positioning. Nokia describes MantaRay SON as an automation layer within the MantaRay SMO framework, with support for multi-supplier/non-real-time RIC functionality and an application ecosystem. Nokia also has historical EdenNet SON material, including EdenNet SON Energy Saving Management.
Therefore, the statement that is not true is:
Energy savings management is not covered.

NEW QUESTION # 17
......

Customer first, service first is our principle of service. If you buy our SRAN-Radio-Network-Performance-Optimization study guide, you will find our after sale service is so considerate for you. We are glad to meet your all demands and answer your all question about our SRAN-Radio-Network-Performance-Optimization Training Materials. So do not hesitate and buy our SRAN-Radio-Network-Performance-Optimization study guide, we believe you will find surprise from our products. you should have the right to enjoy the perfect after sale service and the high quality products!

SRAN-Radio-Network-Performance-Optimization Practice Braindumps: https://www.actual4exams.com/SRAN-Radio-Network-Performance-Optimization-valid-dump.html