300-515 Latest Test Prep | 300-515 Trustworthy Dumps

P.S. Free & New 300-515 dumps are available on Google Drive shared by SureTorrent: https://drive.google.com/open?id=1lzchNjEiiTg0TAtQVDGHDCK76Zv6Z-so

If you want to improve your own IT techniques and want to pass 300-515 certification exam, our SureTorrent website may provide the most accurate Cisco's 300-515 exam training materials for you, and help you Pass 300-515 Exam to get 300-515 certification. If you are still hesitated, you can download 300-515 free demo and answers on probation on SureTorrent websites. We believe that we won't let you down.

Cisco 300-515 Exam Syllabus Topics:

Section	Weight	Objectives
VPN Architecture	25%	- Compare VPN architecture (Layer 2 vs Layer 3, Inter-AS/Intra-AS) - Troubleshoot underlay (Core IGP, LSP) - Describe L3VPN data plane (underlay label, VRF forwarding, VPNv6) - Describe Layer 2 service architecture (IOS XR Ethernet Flowpoints, IOS XE EVCs) - Describe L3VPN control plane (MP-BGP, RD, RT, VPN labels, VRF, PE-CE)
IPv6 VPNs	10%	- Troubleshoot IPv6 VPN provider edge (PE-PE, PE-CE) - Describe IPv6 VPN routing requirements (MP-BGP, PE-CE)
Layer 3 VPNs	35%	- Implement extranet/shared services (route targets/policy) - Troubleshoot Intra-AS L3VPNs (PE-CE, PE-PE, PE-RR) - Describe routing requirements (MP-BGP, PE-CE routing) - Describe Inter-AS L3VPNs (Options A, B, AB, C) - Describe CSC concepts - Implement multicast VPN (Intranet, Extranet, mLDP)
Layer 2 VPNs	30%	- Troubleshoot L2VPN services (E-LAN, E-Line, E-Tree) - Implement Ethernet OAM - Describe EVPN concepts (data plane/control plane, multihoming, suppression, forwarding) - Implement EVPN (IRB, VPWS, native)

>> 300-515 Latest Test Prep <<

Quiz Unparalleled Cisco - 300-515 - Implementing Cisco Service Provider VPN Services Latest Test Prep

The cost of registering for a certification Implementing Cisco Service Provider VPN Services (300-515) exam is quite expensive, ranging between $100 and $1000. After paying such an amount, the candidate is sure to be on a tight budget. SureTorrent provides Implementing Cisco Service Provider VPN Services (300-515) preparation material at very low prices compared to other platforms. We also assure you that the amount will not be wasted and you will not have to pay for the Implementing Cisco Service Provider VPN Services (300-515) certification test for a second time.

Cisco Implementing Cisco Service Provider VPN Services Sample Questions (Q123-Q128):

NEW QUESTION # 123
SIMULATION 6

Guidelines
This is a lab item in which tasks will be performed on virtual devices.
Refer to the Tasks tab to view the tasks for this lab item

Refer to the Topology tab to access the device console(s) and perform the tasks.

Console access is available for all required devices by clicking the device icon or using the

tab(s) above the console window.
All necessary pre-configurations have been applied.

Do not remove any existing configurations from the devices, only those necessary to make the

appropriate changes required to fulfill the listed tasks.
Do not change the enable password or hostname for any device.

Save your configurations to NVRAM before moving to the next item.

Click Next at the bottom of the screen to submit this lab and move to the next question.

When Next is clicked, the lab closes and cannot be reopened.

Topology

Tasks
CE1 and CE2 are IPv6 Customer Premise Equipment of two customers that communicate with each other through the MPLS L3VPN core comprising Provide Edge PE1, PE2, and route- reflector RR.
Perform the below configuration and verification tasks as noted.
1. Troubleshoot and modify the CEs to establish IPv6 BGP sessions with the PEs.
2. Troubleshoot and modify the PEs to receive the remote CE's advertised route in their BGP VRF table.
Initial configuration with IPv6 addressing has been completed. Do not change the configurations except to fulfill the abovementioned tasks.
Apply the solution with the minimum configuration.

Answer:

Explanation:
See explanation below.
Explanation:
CE1

CE2

PE1

PE2

Route-Reflector (RR)

CE routers: Enabling the IPv6 address-family, activating the PE neighbor, and advertising the internal /128 loopbacks brings the eBGP IPv6 sessions up.
PE routers:
Under address-family ipv6 vrf CUST the CE neighbors are activated so the PE learns the

customer routes.
Matching route-target import/export ensures those VPNv6 routes are exported to RR and

imported by the remote PE.
Activating the RR neighbor under address-family vpnv6 allows VPNv6 prefixes to flow between

PEs through the route-reflector.
RR: Activating each PE as a VPNv6 peer reflects the VPNv6 routes between them, so each PE receives the remote CE's IPv6 prefixes in its VRF BGP table.

NEW QUESTION # 124
Drag and Drop Question
Drag and drop the EVPN components from the left onto the correct planes on the right.

Answer:

Explanation:

NEW QUESTION # 125
Refer to the exhibit.

The CE router has established a BGP peering with the PE router, and the CE will use the core infrastructure of the PE as a backbone carrier to support CSC. Which additional task can you perform to complete the configuration?

A. Change the rd value to 65001:65001 under the VRF section of the PE router.
B. Configure the address-family ipv4 labeled-unicast command under the neighbor configuration of the CE router for the PE.
C. Configure static routing on the CE router.
D. Configure OSPF on the PE router.

Answer: D

NEW QUESTION # 126
Refer to the exhibit. A service provider network uses BGP as its PE-to-CE routing protocol.
Customer A is dual-homed to the service provider via CE1. A network engineer is implementing EVPN native with active load balancing so that customer A's traffic can more efficiently use both links. Which action must the engineer take?

A. Configure separate physical interfaces on CE1 for the two PE connections.
B. Configure CE1 to send labels through BGP.
C. Configure PE1 and PE2 for ARP suppression.
D. Configure PE1 and PE2 with the same ESI.

Answer: D

Explanation:
EVPN all-active multihoming requires both PEs that connect to the same CE to share the identical Ethernet Segment Identifier (ESI). Using the same ESI signals a single multihomed Ethernet segment, enabling DF election and active/active load balancing for the CE's traffic.

NEW QUESTION # 127
An ISP provides a major client MPLS VPN for managed services. The MPLS engineering team needs to use the advanced VPN feature of selective VRF import so that only specific prefixes are present in the required VPNs.
Which aspect of this feature must the team consider?

A. The routers that are imported in the VRF can be BGP and IGP routes, so other match conditions in the route map, besides communities, can be used.
B. A route must pass the import route map first and then the route target import filter.
C. The import-map command is applied under the PE interface that connects to the CE router.
D. A route is imported into the VRF only when at least one RT that is attached to the route matches one RT that is configured in the VRF and the route is permitted by the import route map.

Answer: D

NEW QUESTION # 128
......

Our 300-515 study braindumps are designed in the aim of making the study experience more interesting and joyful. Through pleasant learning situation and vivid explanation of our 300-515 exam materials, you will become more interested in learning. Please accept our 300-515 learning prep and generate a golden bowl for yourself. We are waiting for your wise decision to try on or buy our excellent 300-515 training guide.

300-515 Trustworthy Dumps: https://www.suretorrent.com/300-515-exam-guide-torrent.html

What's more, part of that SureTorrent 300-515 dumps now are free: https://drive.google.com/open?id=1lzchNjEiiTg0TAtQVDGHDCK76Zv6Z-so