The most important feature of the online version of our AZ-802 learning materials are practicality. The online version is open to all electronic devices, which will allow your device to have common browser functionality so that you can open our products. At the same time, our online version of the AZ-802 Learning Materials can also be implemented offline, which is a big advantage that many of the same educational products are not able to do on the market at present.
| Section | Objectives |
|---|---|
| Secure Windows Server hybrid infrastructures | - Identity and access management
|
| Implement and manage high availability | - Failover clustering
|
| Networking and storage infrastructure | - Networking
|
| Manage hybrid compute and virtualization | - Containers
|
| Disaster recovery and migration | - Backup and restore
|
| Monitoring and troubleshooting | - Diagnostics
|
The Administering Windows Server (AZ-802) examination is necessary for career advancement, therefore, doing your best to prepare for the Administering Windows Server (AZ-802) certification exam is essential. To succeed on the Administering Windows Server (AZ-802) exam, you require a specific Administering Windows Server (AZ-802) exam environment to practice. But before settling on any one method, you make sure that it addresses their specific concerns about the AZ-802 Exam, such as whether or not the platform they are joining will aid them in passing the Administering Windows Server (AZ-802) exam on the first try, whether or not it will be worthwhile, and will it provide the necessary AZ-802 Questions.
NEW QUESTION # 139
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains two servers named Server1 and Server2 that run Windows Server You need to use connection security rules to control the connections between Server1 and Server2. The solution must meet the following requirements:
* IPsec protection for Server1 and Server2 must be limited.
* Traffic between Server1 and Server2 must be authenticated and encrypted.
* Server2 must accept traffic from Server1 only if Server2 is authenticated by using IPsec.
How should you configure the connection security rules? To answer, select the appropriate options in the answe1 area.
NOTE: Each correct selection is worth one point
Answer:
Explanation:
Explanation:
Type of IPsec rule: Server-to-server rule. Firewall rule on Server2: Inbound port rule: Allow the connection if it is secure.
A server-to-server connection security rule protects traffic exchanged between two specific, explicitly defined endpoints, which is exactly the ' limited ' scope required here, since it applies only between Server1 and Server2 rather than isolating an entire domain or zone of the network the way an isolation rule would (isolation rules are built for domain- or network-wide policies restricting communication to only domain- joined or otherwise trusted computers, a much broader scope than two named servers). An authentication exemption rule only carves out exceptions from IPsec requirements for specified traffic or hosts and would not itself provide the authenticated, encrypted protection the scenario requires; a tunnel rule protects traffic between two gateway computers on behalf of other hosts behind them, which does not match a direct server- to-server relationship. Once the server-to-server connection security rule is defined to require authentication and encryption for traffic between the two servers, Server2 additionally needs an inbound firewall rule of type
' Allow the connection if it is secure, ' which permits inbound traffic from Server1 only when it arrives already authenticated and protected by the negotiated IPsec security association; a plain ' Allow the connection ' rule would accept the traffic regardless of whether it was secured, and outbound or predefined rule types do not enforce the requirement that Server2 accept Server1 ' s traffic only when it is IPsec- authenticated.
NEW QUESTION # 140
You are planning the migration of Archive1 to support the on-premises migration plan. What is the minimum number of IP addresses required for the node and cluster roles on Cluster3?
Answer: B
Explanation:
A Windows Server failover cluster requires a distinct IP address for each individual cluster node ' s network adapter, plus one additional IP address for the cluster ' s own network name resource -- the cluster access point that clients and management tools use to address the cluster as a single logical entity rather than any one specific node. Cluster3 will contain two physical nodes, Node1 and Node2, so at minimum one IP address is required for Node1 ' s network adapter and one for Node2 ' s network adapter. Beyond those two node-level addresses, the cluster core resource itself (the cluster name object and its associated IP address resource) requires one more address so that the cluster can be addressed and managed as a whole and so that any highly available roles hosted on the cluster (such as the file share role planned for Cluster3) can obtain the network identity they need to fail over between nodes. Adding these together -- one for Node1, one for Node2, and one for the cluster ' s own network name -- yields a minimum of three IP addresses required for Cluster3 ' s node and cluster roles. Fewer than three would leave either a node or the cluster itself without a usable network identity, and while additional IP addresses may be consumed by highly available roles later added to the cluster, three is the baseline minimum for the node and cluster roles themselves.
NEW QUESTION # 141
You have an Azure subscription that contains the virtual machines shown in the following table. You plan to use Azure Site Recovery to replicate supported virtual machines to a secondary Azure region. Which virtual machines can be replicated by using Azure Site Recovery? (Exhibit: VMs with their security type and OS.)
Virtual machines with their security type and operating system
Answer: D
Explanation:
Azure Site Recovery replication for Azure-to-Azure scenarios supports standard-security VMs (VM1, VM2) as well as trusted launch virtual machines running Windows Server, a capability that is generally available and documented specifically for Azure-to-Azure replication, which covers VM3. Confidential VMs such as VM4, however, rely on hardware-bound (vTPM/attestation-tied) OS disk encryption keys that are not part of Azure Site Recovery ' s supported replication scenarios, so a VM configured with the Confidential security type cannot currently be replicated using Azure Site Recovery. The Windows Server 2025 Datacenter: Azure Edition operating system itself is fully supported and is not the limiting factor for any of the four VMs; the security type of VM4 is what excludes it. If VM4 must still be protected for disaster recovery, an alternative such as Azure Backup for VM-level snapshots, or a guest-level replication tool that operates independently of the confidential computing attestation boundary, would need to be considered instead of Azure Site Recovery.
NEW QUESTION # 142
You have on-premises file servers that run Windows Server as shown in the following exhibit (Server1: D:
\Folder1, E:\Folder2; Server2: D:\Data). You have the Azure file shares shown in the following exhibit (share1: East US; share2: East US). You add a Storage Sync Service named Sync1 and an Azure File Sync sync group named Group1. Group1 uses share1 as a cloud endpoint. You register Server1 and Server2 with Sync1. You add D:\Folder1 from Server1 as a server endpoint in Group1. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
You can add share2 as a cloud endpoint in Group1: No. You can add E:\Folder2 from Server1 as a server endpoint in Group1: No. You can add D:\Data from Server2 as a server endpoint in Group1: Yes.
Azure File Sync enforces a strict one-to-one relationship between a sync group and its cloud endpoint: a sync group can contain exactly one cloud endpoint, and an Azure file share can be the cloud endpoint of only one sync group. Group1 already uses share1 as its cloud endpoint, so share2 cannot be added as a second cloud endpoint to the same sync group; that statement is No. Separately, Azure File Sync also limits a sync group to only one server endpoint per registered server, regardless of whether the additional path is on a different volume and does not overlap the existing endpoint ' s folder tree. Because Server1 already has D:\Folder1 registered as its server endpoint in Group1, adding a second, independent server endpoint from that same server (E:\Folder2) into the same sync group is not permitted; that statement is also No - to sync E:\Folder2 at all, it would need to go into a different sync group (with its own cloud endpoint). Server2, however, has no existing server endpoint in Group1 yet, so adding D:\Data from Server2 as Group1 ' s server endpoint for that server is a normal, fully supported configuration - every additional registered server can contribute its own single server endpoint to the same sync group, which is exactly how Azure File Sync supports multi-site sync of a common namespace; that statement is Yes.
NEW QUESTION # 143
You have two on-premises servers named Server1 and Server2 that run Windows Server. You have an Azure Storage account named storage1 that contains a file share named share1. Server1 syncs with share1 by using Azure File Sync. You need to configure Server2 to sync with share1. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. On Server2, install the Azure File Sync agent. 2. Register Server2 with the Storage Sync Service. 3. Add a server endpoint to the sync group.
Because Server1 already syncs with share1, the Storage Sync Service resource, the sync group, and the cloud endpoint pointing at share1 already exist; adding Server2 does not require recreating any of that infrastructure.
To bring a new server into an existing Azure File Sync topology, you first install the Azure File Sync agent on that server, which provides the components needed to communicate with the Storage Sync Service.
Immediately afterward (and typically as part of the same setup wizard), you register the server with the existing Storage Sync Service, which establishes trust and identity for Server2 within that Azure resource.
With Server2 registered, the final step is to add a server endpoint to the existing sync group, specifying the local path on Server2 that should participate in the sync relationship with share1; this triggers the initial synchronization and ongoing multi-master sync between Server2 ' s folder and the cloud endpoint (and therefore with Server1, indirectly). Adding a Storage Sync Service to the subscription and adding a cloud endpoint to the sync group are both one-time setup actions that were already completed when Server1 was originally configured, so neither belongs in this three-step sequence.
NEW QUESTION # 144
......
We not only do a good job before you buy our AZ-802 test guides, we also do a good job of after-sales service. Because we are committed to customers who decide to choose our AZ-802 study tool. We put the care of our customers in an important position. We provide you with global after-sales service. If you have any questions that need to be consulted, you can contact our staff at any time to help you solve problems related to our AZ-802 qualification test. Our thoughtful service is also part of your choice of buying our learning materials. Once you choose to purchase our AZ-802 test guides, you will enjoy service.
AZ-802 Certification Dumps: https://www.real4test.com/AZ-802_real-exam.html