There are only key points in our NSE7_FSN_AR-7.6 training materials. From the experience of our former customers, you can finish practicing all the contents in our NSE7_FSN_AR-7.6 guide quiz within 20 to 30 hours, which is enough for you to pass the NSE7_FSN_AR-7.6 Exam as well as get the related certification. That is to say, you can pass the NSE7_FSN_AR-7.6 exam as well as getting the related certification only with the minimum of time and efforts under the guidance of our study prep.
| Section | Objectives |
|---|---|
| Enterprise Firewall | - Centralized management and analytics - VPN technologies - Routing and advanced networking - High availability - Advanced firewall deployment - Authentication and identity - Security Fabric integration - Troubleshooting |
| SD-WAN | - Deployment and troubleshooting - SD-WAN routing - Overlay VPN - SD-WAN architecture - Performance SLA - Application steering |
>> Test NSE7_FSN_AR-7.6 Dumps Free <<
We provide the Fortinet NSE7_FSN_AR-7.6 exam questions in a variety of formats, including a web-based practice test, desktop practice exam software, and downloadable PDF files. ValidVCE provides proprietary preparation guides for the certification exam offered by the Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam dumps. In addition to containing numerous questions similar to the Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam, the Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam questions are a great way to prepare for the Fortinet NSE7_FSN_AR-7.6 exam dumps.
NEW QUESTION # 36
Refer to the exhibit, which shows the output of a diagnose command.
What two conclusions can you draw from the output shown in the exhibit? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are B and D.
The study guide explains that expectation sessions are pinhole sessions created by session helpers for protocols such as FTP that need additional negotiated connections. It states: "FortiGate created an expectation session and opened the pinhole port for the expected return traffic" and also shows that the firewall "creates an expected (pinhole) session to allow the traffic" That makes D correct.
For B, the study guide explains the gwy= field in session output: the first value is the gateway to the destination, and the second is the gateway to the source In the exhibit, the original-direction traffic is DNATed here:
hook=pre dir=org act=dnat 10.171.121.38:0- > 10.200.1.1:60426(10.0.1.10:50365) So the destination after DNAT is the internal host 10.0.1.10, and the session's first gwy value corresponds to the next hop toward that destination. That makes B correct.
Why the other options are wrong:
A is wrong because this is an expectation/session-helper behavior, not an IPS-engine-created session. The study guide ties expectation sessions to helpers such as FTP, not IPS.
C is wrong because 10.200.1.1 is the translated address used before DNAT, not the next hop used to forward the original-direction traffic after translation to the internal destination.
So the verified answers are: B, D.
NEW QUESTION # 37
Which two statements about Security Fabric communications are true? (Choose two.)
Answer: C,D
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of Network Security Support Engineer Study Guide (FortiOS 7.6) topics:
The correct answers are A and B. Security Fabric communication uses Fortinet-proprietary protocols, mainly FortiTelemetry and Neighbor Discovery. The study guide states that FortiTelemetry uses TCP port 8013, and that the connection is always established by the downstream FortiGate toward the upstream FortiGate. This validates option A. The same section also states that FortiTelemetry must be manually enabled. More precisely, the upstream FortiGate interface must have Security Fabric Connection enabled under administrative access so it can accept incoming Security Fabric connection requests. This validates option B.
Option C is wrong because only the FortiTelemetry TCP port 8013 can be changed; Neighbor Discovery uses UDP port 8014 and cannot be changed. Option D is also wrong because Security Fabric communication is not enabled automatically among all Fortinet devices. It requires the correct Security Fabric settings, interface administrative access, and downstream authorization. The study guide's troubleshooting section confirms that when FortiTelemetry is disabled, the upstream FortiGate receives TCP 8013 SYN packets but does not complete the Security Fabric connection.
NEW QUESTION # 38
During which phase of IKEv2 does the Diffie-Helman key exchange take place?
Answer: D
NEW QUESTION # 39
Refer to the exhibit.
Two hub-and-spoke groups are connected through redundant site-to-site IPsec VPNs between Hub 1 and Hub
2.
Which two configuration settings are required for Spoke A1 to establish an auto-discovery VPN (ADVPN) shortcut with Spoke B2? (Choose two.)
Answer: A,B
Explanation:
Comprehensive and Detailed 100 to 150 words of Explanation From Secure Networking Architect Study Guides topics:
For inter-region ADVPN shortcuts, each IPsec interface must be configured according to its ADVPN role.
The Enterprise Firewall 7.6 Administrator Study Guide states that when a spoke connects to a hub, auto- discovery-receiver must be enabled so that the spoke can receive shortcut messages and initiate negotiation of a dynamically created shortcut tunnel. Therefore, A is correct.
When hubs are interconnected through IPsec, the hub-to-hub tunnel must use auto-discovery-forwarder enable. This permits shortcut messages to cross the overlay networks and reach spokes in another region, making B correct. auto-discovery-sender belongs on the hub-facing ADVPN interface used to send shortcut offers to spokes, not on the spoke. Likewise, the hub is not configured as the receiver on its spoke-facing tunnels.
NEW QUESTION # 40
Refer to the exhibit.
Which two observations can you make about the web filter traffic captured using the flow tool? (Choose two.)
Answer: A,C
Explanation:
Analyze the " Send to Application Layer " Message:
The most critical line in the debug output is: id=65308 ... func=av_receive ... msg= " send to application layer
"
Meaning: This message indicates that the FortiGate kernel is handing the packet over to a user-space daemon (specifically the WAD/Proxy process, indicated by av_receive handlers) for deep inspection.
Implication: This behavior is the hallmark of Proxy-based inspection. In Flow-based inspection, the traffic is handled by the IPS engine (often within the kernel or via specific IPS handlers like ips_measure), and you would not typically see a " send to application layer " message for standard web filtering.
Evaluate Option B (Firewall Policy Mode):
Since the traffic is being sent to the application layer proxy, the Firewall Policy controlling this traffic (Policy ID 1, as seen in Allowed by Policy-1) must be configured with Inspection Mode = Proxy. If it were Flow- based, the traffic would stay in the flow path. Thus, Option B is correct.
Evaluate Option C (Web Filter Profile Mode):
In FortiOS, when a firewall policy is set to Proxy-based inspection, the security profiles (like Web Filter) applied to that policy also operate in Proxy-based inspection mode. The presence of the av_receive function confirms that the content inspection (Web Filter/AV) is being performed by the proxy engine. Thus, Option C is correct.
Why Option A is Incorrect (NPU Offload):
The output shows npu_state=0x100. In the context of a flow trace where traffic is being " sent to application layer, " this confirms the session is not fully offloaded to the NPU (Network Processor). Offloaded traffic (Fast Path) is handled by the hardware and would not generate these specific CPU-level debug logs for the payload inspection phase. The proxying process requires CPU intervention.
Why Option D is Incorrect (Port Mapping):
While valid protocol mapping is necessary for inspection, the specific debug output shown is a direct result of the Inspection Mode (Proxy vs. Flow). The observation of the traffic moving to the application layer is primarily caused by the policy and profile mode settings, making B and C the direct " observations " derived from the log data.
Reference:
FortiGate Troubleshooting (Debug Flow): " If the debug flow shows msg= ' send to application layer ' , it confirms the traffic is being handled by the proxy (WAD) for Proxy-based inspection. "
NEW QUESTION # 41
......
The data for our NSE7_FSN_AR-7.6 practice materials that come up with our customers who have bought our NSE7_FSN_AR-7.6 actual exam and provided their scores show that our high pass rate is 98% to 100%. This is hard to find and compare with in the market. And numerous enthusiastic feedbacks from our worthy clients give high praises not only on our NSE7_FSN_AR-7.6 Study Guide, but also on our sincere and helpful 24 hours customer services online. You will feel grateful to choose our NSE7_FSN_AR-7.6 learning quiz!
NSE7_FSN_AR-7.6 Latest Test Materials: https://www.validvce.com/NSE7_FSN_AR-7.6-exam-collection.html