P.S. NewDumps在Google Drive上分享了免費的、最新的JN0-351考試題庫：https://drive.google.com/open?id=1s-pvmHwktUFOfPLwY6yrYg23PpDHAeVK
NewDumps是一個對Juniper JN0-351 認證考試提供針對性培訓的網站。NewDumps也是一個不僅能使你的專業知識得到提升，而且能使你一次性通過Juniper JN0-351 認證考試的網站。NewDumps提供的培訓資料是由很多IT資深專家不斷利用自己的經驗和知識研究出來的，品質很好，準確性很高。一旦你選擇了我們NewDumps，不僅能夠幫你通過Juniper JN0-351 認證考試和鞏固自己的IT專業知識，還可以享用一年的免費售後更新服務。
| 主題 | 簡介 |
|---|---|
| 主題 1 |
|
| 主題 2 |
|
| 主題 3 |
|
| 主題 4 |
|
JN0-351 認證是互聯網界具有極大聲望的網路技能認證，在全球，通過IBM認證考試的工程師，平均年薪在10萬元以上。通過 HP 認證考試的工程師，平均年薪在30萬元以上。獲得 Juniper 的 JN0-351 認證的工程師，平均年薪也不低於20萬人民幣。據說，這還只是基本工資，不包括獎金，紅利和其他非工資性補貼。難怪美國副總統戈爾曾把 Juniper JN0-351 認證恰當而幽默地稱為“獲得高技術，高薪水的頭等艙船票”。
問題 #144
You are asked to create a new firewall filter to evaluate Layer 3 traffic that is being sent between VLANs. In this scenario, which two statements are correct? (Choose two.)
答案：B,D
解題說明：
Explanation
A firewall filter is a configuration that defines the rules that determine whether to forward or discard packets at specific processing points in the packet flow. A firewall filter can also modify the attributes of the packets, such as priority, marking, or logging. A firewall filter can be applied to various interfaces, protocols, or routing instances on a Juniper device1.
A firewall filter has a family attribute, which specifies the type of traffic that the filter can evaluate. The family attribute can be one of the following: inet, inet6, mpls, vpls, iso, or ethernet-switching2. The family inet firewall filter is used to evaluate IPv4 traffic, which is the most common type of Layer 3 traffic on a network.
To create a family inet firewall filter, you need to specify the appropriate match criteria and actions for each term in the filter. The match criteria can include various fields in the IPv4 header, such as source address, destination address, protocol, port number, or DSCP value. The actions can include accept, discard, reject, count, log, policer, or next term3.
To apply a firewall filter to Layer 3 traffic that is being sent between VLANs, you need to apply the filter to the appropriate IRB interface. An IRB interface is an integrated routing and bridging interface that provides Layer 3 functionality for a VLAN on a Juniper device. An IRB interface has an IP address that acts as the default gateway for the hosts in the VLAN. An IRB interface can also participate in routing protocols and forward packets to other VLANs or networks4.
Therefore, option C is correct, because you should create a family inet firewall filter with the appropriate match criteria and actions. Option D is correct, because you should apply the firewall filter to the appropriate IRB interface.
Option A is incorrect, because you should not create a family ethernet-switching firewall filter with the appropriate match criteria and actions. A family ethernet-switching firewall filter is used to evaluate Layer 2 traffic on a Juniper device. A family ethernet-switching firewall filter can only match on MAC addresses or VLAN IDs, not on IP addresses or protocols5.
Option B is incorrect, because you should not apply the firewall filter to the appropriate VLAN. A VLAN is a logical grouping of hosts that share the same broadcast domain on a Layer 2 network. A VLAN does not have an IP address or routing capability. A firewall filter cannot be applied directly to a VLAN; it must be applied to an interface that belongs to or connects to the VLAN6.
References:
1: Firewall Filters Overview 2: Configuring Firewall Filters 3: Configuring Firewall Filter Match Conditions and Actions 4: Understanding Integrated Routing and Bridging Interfaces 5: Configuring Ethernet-Switching Firewall Filters 6: Understanding VLANs
問題 #145
Refer to the exhibit.
Referring to the output shown in the exhibit, which statement is correct?
答案：C
解題說明：
Explanation
In OSPF, the state of the neighbor relationship is determined by the exchange of OSPF packets between routers1. The state "2Way" as shown in the exhibit indicates that bi-directional communication has been established between the two OSPF routers1. This is the normal state for a neighbor that is not the Designated Router (DR) or Backup Designated Router (BDR) on a broadcast, non-broadcast multi-access (NBMA), or point-to-multipoint network1. These neighbors are often referred to as "DRothers"1. Therefore, option B is correct.
問題 #146
You are asked to create a default route that will be advertised to your internal OSPF neighbors. You have three upstream connections to the Internet and you must ensure that when available, all traffic uses ISP1 as your primary connection and only uses ISP2 and ISP3 when ISP1 is not available.
Which solution should you implement in this scenario?
答案：D
解題說明：
The solution that should be implemented in this scenario is to create a default generate route that includes an import policy to match BGP routes from ISP1 and assign a preference value of four or less. This way, the default route will be advertised to the internal OSPF neighbors only when there is a BGP route from ISP1 in the routing table, and it will have a higher preference than any other default route from ISP2 or ISP3. If ISP1 is not available, the default generate route will be withdrawn and the traffic will use the next available default route from ISP2 or ISP3.
Option A is incorrect because creating a default static route with ISP1's address as the next hop while specifying the addresses for ISP2 and ISP3 as qualified next hops with a preference value of six or higher will not ensure that the default route is advertised to the internal OSPF neighbors only when ISP1 is available. The default static route will always be in the routing table regardless of the availability of ISP1, and it will have a lower preference than any other default route from ISP2 or ISP3.
Option C is incorrect because creating a default static route with each neighbor address as the next hop will not ensure that all traffic uses ISP1 as the primary connection and only uses ISP2 and ISP3 when ISP1 is not available. The default static route will always be in the routing table regardless of the availability of ISP1, and it will load balance the traffic among the three ISPs.
Option D is incorrect because creating a default aggregated route will not ensure that the default route is advertised to the internal OSPF neighbors only when ISP1 is available. The default aggregated route will always be in the routing table regardless of the availability of ISP1, and it will not have any preference value associated with it. References:
* Enterprise Routing and Switching, Specialist (JNCIS-ENT) - Juniper Networks
* Enterprise Routing and Switching, Specialist (JNCIS-ENT) - Juniper Networks
問題 #147
Which three actions are required for filter-based forwarding? (Choose three.)
答案：A,C,D
問題 #148
Your BGP neighbors, one in the USA and one in France, are not establishing a connection with each other.
Referring to the exhibit, which statement is correct?
答案：C
解題說明：
In the configuration shown, BFD (Bidirectional Forwarding Detection) liveness detection is globally configured, but for BFD to work with specific BGP neighbors, it must be configured under each BGP neighbor or BGP group. Without specific BFD configuration at the neighbor or group level, BFD will not be used to monitor the BGP sessions, which might be causing the BGP neighbors not to establish a connection.
問題 #149
......
NewDumps的經驗豐富的專家團隊開發出了針對Juniper JN0-351 認證考試的有效的培訓計畫，很適合參加Juniper JN0-351 認證考試的考生。NewDumps為你提供的都是高品質的產品，可以讓你參加Juniper JN0-351 認證考試之前做模擬考試，可以為你參加考試做最好的準備。
最新JN0-351考證: https://www.newdumpspdf.com/JN0-351-exam-new-dumps.html
P.S. NewDumps在Google Drive上分享了免費的、最新的JN0-351考試題庫：https://drive.google.com/open?id=1s-pvmHwktUFOfPLwY6yrYg23PpDHAeVK