What's more, part of that PrepPDF NS0-522 dumps now are free: https://drive.google.com/open?id=1_9SQW_3IA7yIQ-PVH2_HzCniJKeBHKzv
Our NetApp Implementation Engineer - SAN ONTAP Exam test torrent boost 99% passing rate and high hit rate so you can have a high probability to pass the exam. Our NS0-522 study torrent is compiled by experts and approved by the experienced professionals and the questions and answers are chosen elaborately according to the syllabus and the latest development conditions in the theory and the practice and based on the real exam. If you buy our NetApp Implementation Engineer - SAN ONTAP Exam test torrent you only need 1-2 hours to learn and prepare the exam and focus your main attention on your most important thing.
| Section | Objectives |
|---|---|
| Topic 1: ONTAP SAN solution assessment | - Environmental or physical considerations - Configuration components using tools - Prerequisites and inventory for the installation of all SAN components during planning - Solution design and hardware provisioned to meet customer requirements or expectations |
| Topic 2: ONTAP SAN implementation and configuration | - Clustered storage systems and node configuration tasks - Clustered storage system FCP configuration tasks - Switches and host systems - Clustered storage system iSCSI configuration tasks - SVM configuration tasks - Data protection - Storage space utilization or management concepts - Clustered storage system NVMe configuration tasks |
| Topic 3: ONTAP SAN implementation testing and troubleshooting | - Data migration - Troubleshooting tasks - Testing tasks |
| Topic 4: ONTAP SAN Concepts | - Storage controller configuration concepts - Switch and host configuration concepts - Storage space utilization or management concepts - Data protection concepts |
The NetApp Implementation Engineer - SAN ONTAP Exam (NS0-522) Exam Questions offered by PrepPDF provide you with a good idea of what you can expect in the NS0-522 exam from Network Appliance. All the NS0-522 exam topics and objectives are well covered by our product. Thus, PrepPDF Network Appliance NS0-522 Practice Questions are considered a very good resource that will help you in your practicing by focusing on your weak points and strengthening them to easily pass the NS0-522 exam.
NEW QUESTION # 57
A customer has recently installed a new NetApp AFF system and Cisco Nexus 9000 Series switches for their SAN workload. The administrator is tasked with configuring interface groups for port-based load balancing.
Which two commands are required? (Choose two.)
Answer: C,D
Explanation:
ONTAP interface groups support several traffic-distribution algorithms, including port, which distributes traffic using transport-layer TCP or UDP port information. Therefore, network port ifgrp create -distr-func port establishes the corresponding ONTAP-side distribution behavior. The connected Cisco Nexus infrastructure should use a compatible port-channel hashing method; NetApp validated architectures show port-channel load-balance src-dst l4port for Nexus switches so source and destination Layer-4 ports contribute to traffic distribution. This improves utilization across member links compared with algorithms using fewer flow attributes. The original V9.02 text contained the typographical string 14port; the correct command parameter is l4port, meaning Layer 4 port. Options C and D do not establish the requested port-based load- balancing algorithm. Relevant SAN ONTAP topics include interface groups, port distribution functions, link aggregation, and Nexus port-channel hashing.
NEW QUESTION # 58
An administrator provisions several LUNs on a four-node NetApp AFF cluster using default settings. Each AFF node has four FC LIFs. The configuration is modified to limit the target paths to two LIFs per node.
Which NetApp ONTAP command will verify initiator group visibility for each LIF?
Answer: B
Explanation:
The configuration described is a portset use case. NetApp states that portsets can be bound to igroups to restrict which SAN LIFs an initiator can use to access mapped LUNs, which is especially useful when a node has more than two LIFs and access must be limited to a subset. The lun portset show command displays each portset together with its protocol, Port Names representing participating LIFs, and the igroups bound to that portset. That output directly verifies which igroup has visibility through which LIFs. lun mapping show primarily displays LUN-to-igroup mappings and SLM reporting nodes; it does not provide the same direct LIF membership view. Therefore, the supplied V9.02 answer D requires correction to C. Relevant SAN ONTAP topics are portsets, igroup binding, LIF path restriction, SLM, and SAN path visibility.
NEW QUESTION # 59
A customer Is setting up a four-node NetApp AFF cluster for use with NVMe/TCP and wants to use automatic host discovery.
Which protocol is used for the discovery of controllers?
Answer: C
Explanation:
For automatic host discovery in a four-node NetApp AFF cluster using NVMe/TCP, the protocol used is mDNS (Multicast DNS). mDNS allows for the discovery of controllers and other networked devices without the need for a centralized DNS server, simplifying the setup process in environments that support NVMe over TCP.
For further information, refer to:
* NetApp Documentation on NVMe/TCP
* NetApp Community on Host Discovery
NEW QUESTION # 60
A customer has onboarded a new application that is based on SAN, and they need to present additional storage to an FCP SAN host.
Which two tasks must be performed on the storage cluster to present the storage? (Choose two.)
Answer: A,B
Explanation:
For an FCP SAN host, the storage object to present is a LUN, and host access is controlled by mapping that LUN to an initiator group. NetApp's SAN provisioning workflow creates the LUN, creates or selects an igroup containing the host's FC WWPNs, and then creates the LUN mapping. A namespace and subsystem are NVMe constructs, not the objects used to present conventional SCSI LUN storage over FCP. Therefore, creating a namespace or mapping storage to an NVMe subsystem would not satisfy the stated FCP requirement. The question assumes the FCP SVM and host connectivity already exist; the required storage- side actions are to provision the new LUN and map it to the appropriate igroup. Relevant SAN ONTAP topics are FCP provisioning, LUN creation, igroups, WWPN-based host access, and LUN mapping.
NEW QUESTION # 61
What is the minimum number of rack units that are required on each site for a NetApp AFF All San Array (ASA) A800 MetroCluster IP configuration with 72 disks per site and Cisco N9K-C9336C-FX2 backend switches?
Answer: B
Explanation:
For a NetApp AFF All SAN Array (ASA) A800 MetroCluster IP configuration with 72 disks per site and Cisco N9K-C9336C-FX2 backend switches, the minimum number of rack units required on each site is 16 RU. This includes space for the controllers, disk shelves, and the necessary network switches. This configuration ensures that all components are properly accommodated and operational within the specified rack space.
For detailed information on the rack unit requirements and MetroCluster IP configurations, refer to:
* NetApp Documentation on MetroCluster IP
* MetroCluster IP Solution Architecture
NEW QUESTION # 62
......
Computers are changing our life day by day. We can do many things on computers. Technology changes the world. If you have dream to be a different people, obtaining a Network Appliance certification will be the first step. NS0-522 learning materials will be useful for you. As you can see the Forbes World's Billionaires List shows people starting bare-handed are mostly engaging in IT field. NS0-522 Learning Materials may be the first step to help you a different road to success.
NS0-522 New Test Bootcamp: https://www.preppdf.com/NetworkAppliance/NS0-522-prepaway-exam-dumps.html
What's more, part of that PrepPDF NS0-522 dumps now are free: https://drive.google.com/open?id=1_9SQW_3IA7yIQ-PVH2_HzCniJKeBHKzv