DOWNLOAD the newest DumpsValid NSE5_FSW_AD-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1o-C1oHZ9vAVr8iX0Vq_N9x5Xbi0A5Zix
Those who are ambitious to obtain NSE5_FSW_AD-7.6 certification mainly include office workers; they expect to reach a higher position and get handsome salary, moreover, a prosperous future. All of these requirements our NSE5_FSW_AD-7.6 exam materials can meet. Our NSE5_FSW_AD-7.6 study materials can help you pass the exam successful. Before you decide to buy our NSE5_FSW_AD-7.6 Exam Torrent, you can free download the demo of our NSE5_FSW_AD-7.6 exam questions, which contains a few of questions and answers of our NSE5_FSW_AD-7.6 training guide.
| Certification Vendor: | Fortinet |
|---|---|
| Exam Name: | Fortinet NSE 5 FortiSwitch 7.6 Administrator |
| Exam Number: | NSE5_FSW_AD-7.6 |
| Real Exam Qty: | 30-40 |
| Certificate Validity Period: | 2 years |
| Passing Score: | 70% |
| Related Certifications: | Fortinet NSE 4 FortiGate Administrator Fortinet NSE 5 Network Security Analyst |
| Exam Format: | Multiple choice, Multiple select |
| Exam Price: | $200 USD (varies by region) |
| Available Languages: | English |
| Exam Duration: | 70 minutes |
| Recommended Training: | FortiSwitch 7.6 Administrator Course Fortinet Network Security Expert (NSE) Training Path |
| Exam Registration: | Fortinet Training Institute Fortinet Certification Portal |
| Sample Questions: | Fortinet NSE5_FSW_AD-7.6 Sample Questions |
| Exam Way: | Online proctored or onsite via Pearson VUE testing centers |
| Pre Condition: | Recommended: Fortinet NSE 4 certification or equivalent networking knowledge |
| Official Syllabus URL: | https://www.fortinet.com/training/certification |
>> NSE5_FSW_AD-7.6 Valid Exam Experience <<
If you have the certification for the exam, your competitive force and wage will be improved in your company. NSE5_FSW_AD-7.6 exam cram can help you pass the exam and obtain the corresponding certification successfully. We have a professional team to collect and research the latest information for the exam, and you can know the latest information if you choose us. We offer you free update for 365 days for NSE5_FSW_AD-7.6 Exam Dumps, and our system will send you he latest version automatically. You can receive the downloading link and password for NSE5_FSW_AD-7.6 exam dumps within ten minutes after payment.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 74
Refer to the exhibit.
and an OSPF route with destination 0.0.0.0/0 [110/10]. The OSPF route is marked with a checkmark in the FIB column, while the Static route has a dash.] The routing monitor displays multiple route entries, but only some are installed in the forwarding information base (FIB). After analyzing the two route entries with the destination 0.0.0.0/0, which statement correctly describe why one of these routes is not installed in the FIB? (Choose one answer)
Answer: C
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the Routing Information Base (RIB) contains all potential routes discovered by the switch, but theForwarding Information Base (FIB)only includes the " best " active routes used for hardware packet forwarding. When the routing process receives multiple paths to the exact same destination (in this case, the default route 0.0.0.0/0), it must select the most reliable source based on a specific hierarchy.
The primary tie-breaker for routes from different protocols is theAdministrative Distance (AD). AD is a value from 1 to 255 that represents the trustworthiness of the routing source, where alower value is more preferred.
In the provided exhibit:
* TheOSPFroute has an AD of110(shown as [110/10]).
* TheStaticroute has been configured with an AD of220(shown as [220/0]).
Because the OSPF route ' s AD (110) is lower than the Static route ' s AD (220), the system considers the OSPF route to be superior. Consequently, only the OSPF route is " Selected " and installed into theFIB. The static route remains in the RIB as a " backup " or floating static route; it will only be moved to the FIB if the preferred OSPF route becomes unavailable. Option D is incorrect because having identical prefixes is not a " conflict " but a standard part of route selection where AD decides the winner. Option A is incorrect because metric is only compared if the AD is identical.
NEW QUESTION # 75
An administrator needs to deploy managed FortiSwitch devices in a remote location where multiple VLANs must be utilized to segment devices. No Layer 3 switch or router is present. The the only WAN connectivity is the router provided by the ISP connected to the public internet.
Which two items will the administrator need to use? (Choose two.)
Answer: B,D
Explanation:
To deploy FortiSwitch in a remote location with multiple VLANs and no Layer 3 switch or router, you would need specific configurations:
* VXLAN Interfaces (B):
* Purpose:VXLAN (Virtual Extensible LAN) allows network segmentation without a Layer 3 device, extending VLAN capabilities across dispersed geographical locations over the WAN.
* Implementation:Configuring VXLAN on both FortiSwitch and FortiGate can encapsulate Layer 2 traffic over a Layer 3 network, making it ideal for scenarios lacking dedicated routing hardware.
* Appropriate Hardware (D):
* Requirement:Not all FortiSwitch models might support advanced features like VXLAN; hence, ensuring that the hardware can support such configurations is crucial.
References:For specific information on VXLAN configuration and hardware requirements, refer to the technical documentation provided by Fortinet:Fortinet Product Documentation
NEW QUESTION # 76
Which statement about 802.1X security profiles using MAC-based authentication mode is true?
Answer: C
Explanation:
Pag 232, FortiSwitch_7.2_Study_Guide-Online "However, if you want to authenticate each device behind a port, and optionally, grant each device a different access level based on the credentials provided, then MAC- based is required." According to theFortiSwitchOS 7.6 Administration Guideand theFortiLink Guide (FortiOS 7.6), FortiSwitch supports two primary modes for 802.1X authentication:port-basedandMAC-based.
In802.1X port-based authentication, once a single supplicant (user or device) successfully authenticates, the physical port is transitioned to an "authorized" state, allowing all traffic from any device connected to that port (e.g., through a hub or unmanaged switch) to pass through. This is summarized by Option D, which is incorrect for MAC-based mode.
In contrast,802.1X MAC-based authentication(Option B) treats each device's MAC address as a distinct session. The switch maintains a table of authenticated MAC addresses for each port and applies security policies to each one individually. This granular approach allows the FortiSwitch to grantdifferent access levelsto different devices on the same physical port. For example, a laptop might be assigned to a corporate VLAN with a specific Dynamic Access Control List (DACL), while an IP phone on the same port is assigned to a Voice VLAN.
Furthermore, FortiSwitchOS 7.6 documentation specifies that MAC-based mode can support up to20 devices per port. Each device must provide its own credentials (or be validated via MAC Authentication Bypass), enabling the switch to enforce specific security attributes-such as VLAN IDs, QoS marking, and ingress ACLs-tailored to each uniquely identified device. While the switch typically communicates with aRADIUS server(Option C) for these credentials, MAC-based mode's primary functional advantage is this individual session management and authorization flexibility.
NEW QUESTION # 77
Which statement about 802.1X security profiles using MAC-based authentication mode is true?
Answer: C
Explanation:
Pag 232, FortiSwitch_7.6_Study_Guide-Online " However, if you want to authenticate each device behind a port, and optionally, grant each device a different access level based on the credentials provided, then MAC- based is required. " According to theFortiSwitchOS 7.6 Administration Guideand theFortiLink Guide (FortiOS 7.6), FortiSwitch supports two primary modes for 802.1X authentication:port-basedandMAC-based.
In802.1X port-based authentication, once a single supplicant (user or device) successfully authenticates, the physical port is transitioned to an " authorized " state, allowing all traffic from any device connected to that port (e.g., through a hub or unmanaged switch) to pass through. This is summarized by Option D, which is incorrect for MAC-based mode.
In contrast,802.1X MAC-based authentication(Option B) treats each device ' s MAC address as a distinct session. The switch maintains a table of authenticated MAC addresses for each port and applies security policies to each one individually. This granular approach allows the FortiSwitch to grantdifferent access levelsto different devices on the same physical port. For example, a laptop might be assigned to a corporate VLAN with a specific Dynamic Access Control List (DACL), while an IP phone on the same port is assigned to a Voice VLAN.
Furthermore, FortiSwitchOS 7.6 documentation specifies that MAC-based mode can support up to20 devices per port. Each device must provide its own credentials (or be validated via MAC Authentication Bypass), enabling the switch to enforce specific security attributes-such as VLAN IDs, QoS marking, and ingress ACLs-tailored to each uniquely identified device. While the switch typically communicates with aRADIUS server(Option C) for these credentials, MAC-based mode ' s primary functional advantage is this individual session management and authorization flexibility.
NEW QUESTION # 78
(Full question statement start from here)
Refer to the exhibit.
You run the command diagnose switch-controller switch-info loopguard access-1 and see that theMAC-Move column displays a value of0forport1.
What does this indicate? (Choose one answer)
Answer: C
Explanation:
In FortiSwitchOS 7.6,Loop Guardis a Layer 2 loop detection mechanism primarily designed to protect access ports from unintended network loops. In itsoriginal implementation, Loop Guard only detected loops on the native VLAN, which limited its effectiveness in environments using multiple tagged VLANs. To address this limitation, Fortinet enhanced Loop Guard by introducing theMAC move detection feature, as documented in the FortiSwitchOS 7.6 Administrator Guide.
TheMAC move optioninstructs the FortiSwitch to monitor for repeated MAC address flapping events across ports or VLANs. Such MAC movement is a strong indicator of a Layer 2 loop. However, this enhanced detection mechanism isdisabled by defaultand must be explicitly enabled by configuring aMAC move threshold greater than zero.
According to the FortiSwitchOS 7.6 Administrator Guide (page 164), enabling MAC move allows Loop Guard to detect loops beyond the native VLAN. Furthermore, the guide explicitly states (page 166) thata MAC-Move value of 0 indicates that the MAC move feature is not enabled. This means the switch is not monitoring MAC address movement as part of its loop detection logic, even though Loop Guard itself may still be enabled on the port.
Therefore, a MAC-Move value of 0 does not indicate that Loop Guard is disabled or inactive, nor does it imply VLAN-wide port shutdown behavior. It strictly confirms thatMAC move detection has not been enabled, makingOption Cthe correct and fully verified answer based on FortiSwitchOS 7.6 documentation.
NEW QUESTION # 79
......
NSE5_FSW_AD-7.6 Lead2pass: https://www.dumpsvalid.com/NSE5_FSW_AD-7.6-still-valid-exam.html
P.S. Free & New NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by DumpsValid: https://drive.google.com/open?id=1o-C1oHZ9vAVr8iX0Vq_N9x5Xbi0A5Zix