We can promise that you would like to welcome this opportunity to kill two birds with one stone. If you choose our NSE5_FSW_AD-7.6 Test Questions as your study tool, you will be glad to study for your exam and develop self-discipline, our NSE5_FSW_AD-7.6 latest question adopt diversified teaching methods, and we can sure that you will have passion to learn by our products. We believe that our products will help you successfully pass your exam and hope you will like our product.
| Section | Objectives |
|---|---|
| Layer 2 control and security | - Use filtering and antispoofing techniques on FortiSwitch - Use port security options on FortiSwitch - Use ACLs, security profiles, and VLAN security mechanisms on FortiSwitch |
| Monitoring and troubleshooting | - Troubleshoot FortiLink issues - Interpret system logs, monitor port statistics, and diagnose connectivity issues - Use tools to view and extract network information from FortiSwitch - Use packet capturing methods to monitor and troubleshoot traffic issues |
| FortiSwitch concepts | - Configure the ports required for stack deployment - Use QoS and LLDP-MED on FortiSwitch - Configure switching and routing on FortiSwitch - Configure STP to prevent network loops - Configure switch ports, split port, and available transceivers - Configure VLANs using FortiSwitch |
| Deployment and management | - Deploy FortiSwitch supported deployment topologies - Configure and provision FortiSwitch - Deploy and configure FortiSwitch in a multi-tenancy environment |
>> Free NSE5_FSW_AD-7.6 Test Questions <<
This society is ever – changing and the test content will change with the change of society. You don't have to worry that our NSE5_FSW_AD-7.6 study materials will be out of date. In order to keep up with the change direction of the exam, our question bank has been constantly updated. We have dedicated IT staff that checks for updates every day and sends them to you automatically once they occur. The update for our NSE5_FSW_AD-7.6 Study Materials will be free for one year and half price concession will be offered one year later.
NEW QUESTION # 73
Refer to the diagnostic output:
What makes the use of the sniffer command on the FortiSwitch CLI unreliable on__port__23?
Answer: C
Explanation:
Page 452 of 7.2 study guide, specifically states "Although you can use the sniffer command to capture traffic on switch ports, the types of packets capture by the sniffer are very limited.
The use of the sniffer command on FortiSwitch CLI can be unreliable on port 23 for specific reasons related to the nature of traffic on the port:
D).The switch port might be used as a trunk member.When a switch port is configured as a trunk, it can carry traffic for multiple VLANs. If the sniffer is set up without specifying VLAN tags or a range of VLANs to capture, it may not accurately capture or display all the VLAN traffic due to the volume and variety of VLAN-tagged packets passing through the trunk port. This limitation makes using the sniffer on a trunk port unreliable for capturing specific VLAN traffic unless properly configured to handle tagged traffic.
References:
For guidelines on how to properly use sniffer commands on trunk ports and configure VLAN filtering, consult the FortiSwitch CLI reference available through Fortinet support channels, including theFortinet Knowledge Base.
NEW QUESTION # 74
Refer to the exhibits.
You are reviewing a FortiSwitch configuration where port1 and port2 are connected to a switched network.
Loop guard is enabled on port1.
The CLI output shows that the port1 status is triggered due to loop guard. Which two conditions could have caused this shutdown? (Choose two.)
Answer: C,D
Explanation:
According to the FortiSwitchOS 7.6 Administration Guide and the FortiSwitch 7.6 Study Guide , the Loop Guard feature protects Layer 2 networks from switching loops and broadcast storms. Unlike standard STP loop protection mechanisms, FortiSwitch Loop Guard operates by periodically sending out proprietary Loop Guard Data Packets (LGDP) / probe frames out of ports where loop guard is enabled.
The loop-detection logic evaluates whether these probe frames return to the switch:
* Frame Received Back on the Same Port (Option B): If a loop guard broadcast frame transmitted out of port1 traverses an external unmanaged hub, switch, or looped cable and is received back on port1, the switch detects a downstream loop directly connected to that port.
* Frame Received on Another Port of the Same Switch (Option A): In multi-homed connections to a switched network (such as port1 and port2 sharing the same Layer 2 broadcast domains/VLANs), a loop guard frame sent from port1 that loops through the switched network and is received on port2 proves that an active Layer 2 loop exists between those two switch interfaces.
When a loop condition is verified by either scenario, FortiSwitch changes the status of the protected port to Triggered (as verified in the CLI output of the exhibit) and takes the port out of service to isolate the loop.
Regarding the incorrect options: Option C describes Spanning Tree loop guard behavior (loss of BPDUs on non-designated ports), not the FortiSwitch proprietary loop guard mechanism. Option D describes Storm Control or rate limiting, which acts on packet volume thresholds rather than loop-detection probe frames.
NEW QUESTION # 75
Exhibit.
What conditions does a FortiSwitch need to have to successfully configure the options shown in the exhibit above? (Choose two.)
Answer: A,B
Explanation:
Regarding the configuration of a FortiSwitch to split a port into multiple smaller interfaces:
* The CLI commands are enabling a split port into four 10Gbps interfaces (Option B): The command shown in the exhibit is typically used to configure a high-speed port (like a 40Gbps or 100Gbps interface) to be divided into smaller, independent 10Gbps interfaces. This feature allows more flexible use of the switch's physical resources.
* The port full speed prior to the split was 100G SFP+ (Option C): Given the context of splitting the port into multiple 10Gbps interfaces, the original port configuration likely supported a high-speed transceiver such as 100G SFP+. This would make it technically feasible to divide the interface into multiple 10Gbps channels, enhancing connectivity options without requiring additional physical interfaces.
These configurations and capabilities are typical in modern network setups, especially in environments requiring high density and flexibility in connectivity, allowing network administrators to optimize physical infrastructure efficiently.
NEW QUESTION # 76
Refer to the exhibit.
The command diagnose switch physical-ports summary is executed on FortiSwitch.
Based on the VLAN assignments shown in the output, what is the most likely management configuration of this FortiSwitch? (Choose one answer)
Answer: A
Explanation:
The output of the diagnose switch physical-ports summary command provides critical insight into how a FortiSwitch is being managed by examiningVLAN assignments,tag protocol identifiers (TPID), andinternal port behavior. In the provided exhibit, several ports-includingport1,port5, and theinternalport-are assigned toVLAN 4094.
According to the FortiSwitchOS 7.6 Administrator Guide,VLAN 4094 is reserved for FortiLink management trafficwhen a FortiSwitch is managed by a FortiGate. FortiLink uses this dedicated VLAN to carry control- plane traffic such as configuration synchronization, monitoring data, LLDP-based discovery, and keepalive messages between the FortiGate and FortiSwitch. The presence of VLAN 4094 on physical interfaces is a strong and explicit indicator ofFortiGate-managed mode.
In standalone or local management mode, FortiSwitch ports typically default toVLAN 1or administrator- defined VLANs, andVLAN 4094 is not automatically assigned. Similarly, FortiSwitch Cloud-managed devices do not use VLAN 4094 in this manner, as cloud management relies on IP connectivity to FortiEdge Cloud rather than FortiLink encapsulation.
Additionally, the internal port showing VLAN 4094 further confirms FortiLink operation, as this internal interface is used by the switch ASIC to communicate with the FortiGate over the FortiLink tunnel. This behavior is documented in FortiOS 7.6 and FortiSwitchOS 7.6 design guides as characteristic of FortiGate- managed FortiSwitch deployments.
Therefore, based on the VLAN assignments shown-specifically the use ofVLAN 4094-the most accurate and fully verified conclusion is thatthe FortiSwitch is managed by FortiGate, makingOption Bthe correct answer.
NEW QUESTION # 77
Refer to the exhibit.
PC1 and PC2 are connected to port1 on FortiSwitch. Which VLAN tags will FortiSwitch apply when forwarding PC1 and PC2 traffic out of port2? (Choose one answer)
Answer: C
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the classification of untagged traffic entering a switch port is determined by the port ' s hierarchy of VLAN assignment rules.
For the traffic arriving atport1:
* PC1 (MAC 58:ef:68:b4:33:32):The exhibit shows an explicitMAC-based VLAN assignmentrule for this specific MAC address, placing it intoVLAN 10. In FortiSwitchOS, dynamic assignments like MAC- based or protocol-based rules take precedence over the port ' s static native VLAN. Therefore, PC1 ' s traffic is internally associated with VLAN 10.
* PC2 (MAC 58:ef:68:b4:33:c3):There is no MAC-based rule for this device. As a result, the switch falls back to the default behavior and assigns the traffic to the port ' sNative VLAN, which isVLAN 20.
For the traffic exiting port2:
The egress behavior depends on the VLAN tagging configuration of the outgoing interface. On port2, the Native VLAN is 4094, and VLANs 10 and 20 are listed as Allowed VLANs. According to Fortinet documentation, any traffic belonging to an allowed VLAN that does not match the native VLAN ID of the egress port must be sent as tagged 802.1Q frames. Since neither VLAN 10 nor VLAN 20 matches the native ID of 4094, the FortiSwitch will apply a VLAN 10 tag to PC1 ' s traffic and a VLAN 20 tag to PC2 ' s traffic as they are forwarded to the FortiGate.
NEW QUESTION # 78
......
You may never have thought that preparing for the upcoming NSE5_FSW_AD-7.6 certification exam would be so simple. The good news is that the NSE5_FSW_AD-7.6 exam material of our Test4Sure has been successful for all users who have used it to think that passing the exam is a simple matter! After using our NSE5_FSW_AD-7.6 exam materials, they all passed the exam easily and thought it was a valuable learning experience. Learn and practice our NSE5_FSW_AD-7.6 exam questions during the preparation of the exam, it will answer all your doubts. This process of learning left a deep impression on candidates. The exciting NSE5_FSW_AD-7.6 Exam Material is a product created by professionals who have extensive experience in designing exam materials. These professionals have an in-depth understanding of the candidate's questions and requirements, so our NSE5_FSW_AD-7.6 exam questions meets and exceeds your expectations. Learn and practice our exams so that you can easily pass candidates and have a valuable learning experience.
Reliable NSE5_FSW_AD-7.6 Exam Braindumps: https://www.test4sure.com/NSE5_FSW_AD-7.6-pass4sure-vce.html