P.S. Free & New NSE6_OTS_AR-7.6 dumps are available on Google Drive shared by Itcertkey: https://drive.google.com/open?id=1sYusAgf97m62kLwbFgGIGIlu-X94dBjI
Many clients worry that after they our NSE6_OTS_AR-7.6 exam simulation they may fail in the test and waste their money and energy. There are no needs to worry about that situation because our study materials boost high passing rate and hit rate and the possibility to fail in the NSE6_OTS_AR-7.6 test is very little. Just consider that our pass rate of the NSE6_OTS_AR-7.6 study guide is high as 98% to 100%, which is unique in the market. And you will get the best pass percentage with our NSE6_OTS_AR-7.6 learning questions.
| Certification Vendor: | Fortinet |
|---|---|
| Exam Name: | Fortinet NSE 6 - OT Security 7.6 Architect |
| Exam Number: | NSE6_OTS_AR-7.6 |
| Real Exam Qty: | 30-40 |
| Exam Format: | Proctored exam, Multiple choice, Multiple response |
| Available Languages: | English |
| Related Certifications: | Fortinet NSE 6 Fortinet NSE 7 Fortinet NSE 4 Fortinet NSE 5 |
| Exam Price: | USD 200 |
| Certificate Validity Period: | 2 years |
| Exam Duration: | 60 minutes |
| Passing Score: | 60-70% |
| Recommended Training: | Fortinet NSE 6 OT Security Training Path Fortinet Training Institute - OT Security Courses |
| Exam Registration: | Pearson VUE Registration Fortinet Certification Portal |
| Sample Questions: | Fortinet NSE6_OTS_AR-7.6 Sample Questions |
| Exam Way: | Online proctored or testing center (Pearson VUE) |
| Pre Condition: | Recommended: Fortinet NSE 4 certification or equivalent networking and security knowledge |
| Official Syllabus URL: | https://www.fortinet.com/training-certification |
>> NSE6_OTS_AR-7.6 Technical Training <<
We have a large number of regular customers exceedingly trust our Fortinet NSE 6 - OT Security 7.6 Architect practice materials for their precise content about the exam. You may previously have thought preparing for the NSE6_OTS_AR-7.6 practice exam will be full of agony, actually, you can abandon the time-consuming thought from now on. Our practice materials can be understood with precise content for your information, which will remedy your previous faults and wrong thinking of knowledge needed in this exam. As a result, many customers get manifest improvement and lighten their load by using our NSE6_OTS_AR-7.6 practice materials. Up to now, more than 98 percent of buyers of our practice materials have passed it successfully. NSE6_OTS_AR-7.6 practice materials can be classified into three versions: the pdf, the software and the app version. So we give emphasis on your goals, and higher quality of our NSE6_OTS_AR-7.6 practice materials.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 103
Refer to the exhibits.
A partial OT network and the Security Profiles section of the FortiGate_Level2 firewall policy are shown.
You have configured the FortiGate_Level2 firewall policy with a virtual patching profile because PLC-1 has vulnerabilities. A penetration test performed from the HMI device still reports vulnerabilities visible on PLC-1.
Which two additional parameters must you enable on FortiGate_Level2? (Choose two.)
Answer: A,D
Explanation:
Virtual patching relies on OT-specific IPS signatures to detect and block exploitation attempts, so OT signatures must be enabled. Additionally, device detection must be enabled on the interface connected to the PLC to properly identify the OT device and apply the correct protection.
NEW QUESTION # 104
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 105
How are rogue devices evaluated in FortiNAC? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. Through device profiling rules . The study guide states: "When a rogue device record is created, the device is evaluated against the enabled device profiling rules." It further explains that "FortiNAC evaluates a device against each rule until a failed, passed, or cannot evaluate result is reached." That is the direct evaluation mechanism used for rogue devices in FortiNAC.
The guide also adds that "Device profiling rules are used to evaluate and classify rogue devices" and that FortiNAC applies rule methods and classification settings to determine whether the device matches a known type. This is why the other options are incorrect: FortiGuard server queries and the local device database (CIDB) relate to FortiGate device detection workflows, not FortiNAC rogue-device evaluation, and importing a devices list is not the evaluation method described for rogue devices.
NEW QUESTION # 106
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
Answer: A,B
NEW QUESTION # 107
An OT architect has deployed a Layer 2 switch in the OT network at Level 1 in the Purdue model- process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs.
All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network.
Which statement about the traffic between PLC1 and PLC2 is true?
Answer: A
Explanation:
With PLC1 and PLC2 in separate VLANs on a Layer 2 switch, inter-VLAN traffic must be routed.
The FortiGate provides that routing and policy control by using VLAN subinterfaces on a single physical link ("router on a stick"), so all PLC1-PLC2 traffic passes through it.
NEW QUESTION # 108
......
Reliable NSE6_OTS_AR-7.6 Test Cram: https://www.itcertkey.com/NSE6_OTS_AR-7.6_braindumps.html
BONUS!!! Download part of Itcertkey NSE6_OTS_AR-7.6 dumps for free: https://drive.google.com/open?id=1sYusAgf97m62kLwbFgGIGIlu-X94dBjI