私たちのAZ-802練習問題は実際に自分の魅力を持っているため、世界中のユーザーを引き付けました。AZ-802練習問題のように、あらゆる面でユーザーのニーズを真剣に検討する練習問題がないです。AZ-802練習問題を利用すれば、AZ-802試験に合格することは夢ではないです。従って、ためらわなくて、AZ-802練習問題を購入し、勉強し始めましょう！
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Deploy and manage Active Directory Domain Services (AD DS) in on-premises and cloud environments | 20% | - Integrate AD DS with Azure AD and Azure Arc - Manage FSMO roles and replication - Install and configure domain controllers - Implement and manage Group Policy Objects |
| Topic 2: Manage storage and file services | 15% | - Configure data deduplication and replication - Configure file servers and shares - Implement Storage Spaces and Storage Spaces Direct - Integrate on-premises storage with Azure Storage |
| Topic 3: Implement and manage an on-premises and hybrid networking infrastructure | 15% | - Implement hybrid network connectivity - Configure IP addressing, DNS, and DHCP - Configure software-defined networking - Secure network traffic in hybrid environments |
| Topic 4: Manage Windows Servers and workloads in a hybrid environment | 20% | - Implement hybrid identity solutions - Manage updates and patches across hybrid servers - Deploy servers using Windows Admin Center and Azure Arc - Configure remote management and secure administration |
| Topic 5: Manage virtual machines and containers | 15% | - Deploy and manage containers and Kubernetes on Windows Server - Configure Azure Arc-enabled servers and VMs - Deploy and manage Hyper-V virtual machines |
| Topic 6: Implement high availability and disaster recovery | 5% | - Configure failover clustering - Implement backup and recovery solutions - Monitor and troubleshoot Windows Server environments - Use Azure Site Recovery for hybrid workloads - Perform server and workload migrations |
| Topic 7: Secure Windows Server on-premises and hybrid infrastructures | 10% | - Configure Windows Defender and audit policies - Manage access control and permissions - Implement security baselines and hardening |
PassTestのAZ-802問題集はあなたを楽に試験の準備をやらせます。それに、もし最初で試験を受ける場合、試験のソフトウェアのバージョンを使用することができます。これは完全に実際の試験雰囲気とフォーマットをシミュレートするソフトウェアですから。このソフトで、あなたは事前に実際の試験を感じることができます。そうすれば、実際のAZ-802試験を受けるときに緊張をすることはないです。ですから、心のリラックスした状態で試験に出る問題を対応することができ、あなたの正常なレベルをプレイすることもできます。
質問 # 411
You have a failover cluster named Cluster1 that contains three nodes. You plan to add two file server cluster roles named File1 and File2 to Cluster1. File1 will use the File Server for general use role. File2 will use the Scale-Out File Server for application data role. What is the maximum number of nodes for File1 and File2 that can concurrently serve client connections? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation:
File1: 1. File2: 3.
A File Server for general use cluster role runs in an active-passive configuration: only the single node that currently owns the role can service client connections at any given time, so File1 is limited to one active node at most, regardless of how many total nodes Cluster1 has. A Scale-Out File Server for application data role, by contrast, is purpose-built for continuous availability and allows every node in the cluster to simultaneously own and serve the same shares concurrently over SMB Transparent Failover, so File2 can use all three nodes in Cluster1 at once to serve client connections. This distinction is fundamental to selecting the correct file server role for a given workload: general-use file shares favor the simplicity of standard active-passive failover, while application workloads such as Hyper-V over SMB or SQL Server database files benefit from the scale-out role ' s concurrent, multi-node access pattern and higher aggregate throughput. Therefore, File1 tops out at 1 node while File2 can use all 3 nodes concurrently.
質問 # 412
Your network contains an on-premises Active Directory Domain Services (AD DS) domain. The domain contains the servers shown in the following table.
For each server. Windows Defender Firewall is configured to allow only communication between servers on the same segment. Server! has the following connection security rule:
* Name: Rule1
* Rule type: Isolation
* Requirement: Require authentication for inbound connections and request authentication for outbound connections
* Authentication method: Computer (Kerberos V5)
* Profile: Domain. Private. Public
Server2 does not have any connection security rules.
Server3 has the following connection security rule:
* Name: Rute3
* Rule type: Server-to-server
* Endpoints:
o Computers in Endpoint 1:192.168.50/24
o Computers in Endpoint 2: 192.168.1.0/24
* Requirement Request authentication (or inbound and outbound connections
* Authentication method: Computer (Kerberos V5)
* Profile: Domain. Private. Public
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Exhibit
正解：
解説：
Explanation:
A connection security rule only adds an authentication (IPsec) requirement to traffic that a firewall rule already permits; it does not, by itself, open or expand what a firewall rule allows. Because each server ' s Windows Defender Firewall is configured to allow communication only between servers on the same network segment, Server1 and Server2 (both on 192.168.1.0/24) are already permitted to communicate, so Server1 ' s Isolation rule, which only requests (not requires) outbound authentication, does not block that traffic even without a matching rule on Server2. Server3 sits on a different segment (192.168.5.0/24) from both Server1 and Server2, and because the firewall ' s same-segment scope restriction governs whether traffic is allowed at all, neither Server2 ' s attempt to reach Server3 nor Server3 ' s attempt to reach Server1 succeeds, regardless of the Server-to-server connection security rule configured on Server3, since that rule can only add authentication to already-permitted traffic and cannot bypass the firewall ' s segment-based scope restriction.
質問 # 413
Your network contains an on-premises Active Directory Domain Services (AD DS) domain named contoso.
com. The domain contains device and group objects. You plan to sync contoso.com with a Microsoft Entra tenant by using Microsoft Entra Connect sync. You need to ensure that all the objects can be used in Conditional Access policies. What should you do?
正解：A
解説：
Conditional Access policies can target and evaluate signals from device objects (such as device compliance or device state) only when those devices are actually registered as recognized device identities in Microsoft Entra ID -- an on-premises, domain-joined Windows device that is merely synced as a generic object does not automatically become usable as a Conditional Access device signal. Selecting the " Configure Hybrid Microsoft Entra join " option during Microsoft Entra Connect setup is what registers on-premises, domain- joined computer objects as hybrid Microsoft Entra joined devices in the tenant, which is the specific prerequisite that makes those device objects usable in Conditional Access policy conditions (such as requiring a compliant or hybrid-joined device). Clearing the " Configure device writeback " option would disable the flow of Entra-registered device information back to on-premises AD DS, which is the opposite of what ' s needed and would not help device objects become usable in Conditional Access. Changing a group ' s scope to Universal or Global affects that group ' s replication/nesting behavior across domains but has no bearing on whether device or other objects are recognized identities usable in Conditional Access policies. Therefore, enabling the Configure Hybrid Microsoft Entra join option during the Microsoft Entra Connect sync configuration is the necessary step.
質問 # 414
You have an Azure virtual machine named VM1 that runs Windows Server. You need to ensure that administrators request access to VM1 before establishing a Remote Desktop connection. What should you configure?
正解：A
解説：
Microsoft Defender for Cloud provides a Just-in-Time (JIT) VM access feature that is designed exactly for this scenario: instead of leaving management ports such as RDP (3389) or SSH (22) permanently open on a VM ' s network security group, JIT access locks those ports down by default and requires an administrator to explicitly request access for a limited time window and from a specified source IP range before Defender for Cloud temporarily opens an NSG rule to allow the connection; the rule is automatically reverted once the approved time window expires. This directly satisfies the requirement that administrators must request access to VM1 before establishing an RDP session. Azure Front Door is a global HTTP(S) load-balancing and application-delivery service for web workloads and has no concept of just-in-time access requests for RDP.
Azure AD (Microsoft Entra ID) Privileged Identity Management (PIM) provides just-in-time activation for Azure AD roles and Azure RBAC role assignments (for example, temporarily activating a Contributor role), but it does not gate network-level RDP connectivity to a VM by itself. A network security group (NSG) can restrict or block RDP access by rule, but a static NSG rule alone has no request/approval workflow -- it is the underlying object that JIT access temporarily and automatically modifies. Therefore, configuring Just-in-Time VM access in Microsoft Defender for Cloud is the correct solution.
質問 # 415
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2019 and hosts multiple printers. Server2 runs Windows Server 2025. Both servers have the Print and Document Services server role installed. You need to migrate the printers hosted on Server1 to Server2. The solution must minimize administrative effort.
What tools can you use?
正解：D
解説：
The Print Management console includes a built-in Migrate Printers wizard, which is backed internally by the Printbrm.exe command-line tool, that exports printer queues, drivers, port configurations, and security permissions from a source print server in a single guided operation and imports all of that configuration onto a destination server with minimal manual reconfiguration required from the administrator. Windows Admin Center ' s printer management extension provides an equivalent, browser-based, low-effort, GUI-driven path for accomplishing the same printer migration task, giving administrators who prefer a centralized web console a second supported option that also minimizes administrative effort. Server Manager, by contrast, has no dedicated printer migration capability of its own at all; it can be used to add or remove the Print and Document Services role, but it provides no wizard or mechanism for actually exporting and importing printer configurations between servers, so including Server Manager in the answer would add unnecessary complexity rather than reduce administrative effort. Because only Print Management and Windows Admin Center actually support printer migration with minimal effort, and Server Manager does not support it at all, Print Management and Windows Admin Center only is the correct combination of tools for this scenario.
質問 # 416
......
もし君がサラリーマンで、もし君が早い時間でMicrosoftのAZ-802認定試験に合格したいなら、PassTestは君のベストな選択になります。うちのMicrosoftのAZ-802学習教材はPassTestのIT専門家たちが研究して、実践して開発されたものです。それは十年過ぎのIT認証経験を持っています。うちの商品を使ったら、君は最も早い時間で、簡単に認定試験に合格することができます。
AZ-802合格体験記: https://www.passtest.jp/Microsoft/AZ-802-shiken.html