Are you very eager to pass the 300-110 exam? Then you must want to see this amazing learning product right away! After you decide to purchase our 300-110 guide questions, please pay immediately. If your page shows that the payment was successful, you will receive a link of our 300-110 Exam Materials we sent to you within five to ten minutes. And the pass rate of 300-110 study braindumps is high as 98% to 100%.
| Section | Weight | Objectives |
|---|---|---|
| WLAN High Availability and Security Design | 20% | - High availability design
|
| Wireless Site Survey | 25% | - RF propagation and attenuation analysis - Pre-deployment survey and validation - Design requirements collection and constraint evaluation
|
| Mobility Design | 25% | - Guest mobility and BYOD design - Roaming optimization
|
| Wireless Infrastructure Design | 30% | - Wireless Controller architecture and deployment
|
The 300-110 dumps of VCEEngine include valid Designing Cisco Wireless Networks (300-110) questions PDF and customizable 300-110 practice tests. Our 24/7 customer support provides assistance to help 300-110 Dumps users solve their technical hitches during their test preparation. The 300-110 exam questions of VCEEngine come with up to 365 days of free updates and a free demo.
NEW QUESTION # 82
An engineer must reduce roaming delay for wireless medical carts running a real-time application on an 802.1X-secured WLAN. Which feature should be included in the design to eliminate the full reauthentication on each roam?
Answer: B
Explanation:
On an 802.1X/WPA2-Enterprise WLAN, a standard roam requires the client to complete a full EAP exchange with the authentication server plus a four-way handshake, which typically takes hundreds of milliseconds and is enough to break a real-time session. 802.11r Fast Transition solves this by caching the master key material and pre-establishing the key hierarchy so the client can complete the roam with an abbreviated exchange, reducing roam time to well under 50 ms.
This is the only option in the list that eliminates the reauthentication itself. 802.11k assists roaming by providing the client a neighbor report so it does not have to scan every channel to find candidate APs, and 802.11v allows the infrastructure to steer a client toward a better AP - both reduce the time spent deciding where to roam, but neither shortens the authentication exchange once the target AP is chosen. Aironet IE carries Cisco-specific information elements and is unrelated to fast roaming key handling.
NEW QUESTION # 83
An engineer must assess an existing company WLAN to determine the possibility for future IEEE 802.11ac Wave 2 wireless deployment. All access switches are Fast Ethernet-capable only, and the wired infrastructure between existing APs and access switches is based on the CAT 6A standard. Which two actions provide maximum support of Cisco 3800 Series access points? (Choose two.)
Answer: B,D
Explanation:
Cisco 3800 Series APs support IEEE 802.11ac Wave 2, which can deliver throughput exceeding 1 Gbps. Fast Ethernet switches are limited to 100 Mbps per port, creating a severe bottleneck. The two actions that provide maximum support are replacing with mGig switches (Option A) and replacing with gigabit switches with 10G uplinks (Option B). mGig (Multi-Gigabit Ethernet) switches support 2.5G and 5G speeds over existing CAT
6A cabling, allowing the full throughput of 802.11ac Wave 2 APs to be utilized without replacing the existing cable plant. Gigabit switches with 10G uplinks ensure that the access layer can support 1 Gbps per AP port while providing sufficient uplink capacity. Since the existing cabling is already CAT 6A, which supports 10 Gbps over short distances and 5 Gbps over 100 meters, there is no need to replace the wiring (Option D eliminates). The 100-meter distance limitation (Option C) already applies to standard Ethernet and is met by CAT 6A - this is not an action but a constraint check. Option E (55 meters) is only relevant for specific
5GBASE-T configurations and doesn ' t maximize support compared to A and B. Reference: WLSD Study Guide - mGig Infrastructure, 802.11ac Wave 2 Infrastructure Design, Switch Upgrade Planning.
NEW QUESTION # 84
A hospital has a Cisco Catalyst 9800 Series Wireless Controller in an SSO solution deployed in the primary data center. The hospital plans to increase redundancy in the wireless environment. Management decides to deploy an extra Catalyst 9800 WLC offsite to another data center on a different subnet. A WAN link connects the data centers with a firewall at both ends. Which two design approaches must the engineer take to ensure that the APs can fail over? (Choose two.)
Answer: B,E
Explanation:
For APs to be able to fail over between a primary SSO pair in one data center and a standalone WLC in a remote data center connected via WAN with firewalls, two design requirements must be met. First, a mobility tunnel must be created between the wireless controllers (Option A). The mobility tunnel enables the controllers to exchange mobility control messages, peer information, and eventually AP context when failover occurs. Without the mobility tunnel, the remote WLC is not recognized as a valid failover target by the APs through the mobility domain. Second, UDP ports 16666 and 16667 must be open through the firewalls between the controllers (Option D). UDP port 16666 is used for mobility control traffic and UDP port 16667 is used for mobility data traffic - both must be permitted through the firewalls at both data centers for the mobility tunnel to establish and function. HTTPS port 443 (Option B) is used for web management and API communication, not for mobility tunneling. A static RF group leader (Option C) is a RRM configuration unrelated to AP failover capability. Creating a mobility group with the same names (Option E) is a component of the configuration but alone is insufficient without the mobility tunnel and open firewall ports. Reference:
WLSD Study Guide - Inter-Site WLC Failover Design, Mobility Tunnel Requirements, Firewall Port Planning for WAN-Separated Controllers.
NEW QUESTION # 85
An engineer in a branch office that does not have a wired backhaul must ensure that local clients can be switched locally and authenticated centrally. In which mode must the AP be configured?
Answer: A
Explanation:
Flex+Bridge mode is a specialized AP operating mode that combines two distinct Cisco wireless capabilities:
FlexConnect (for local switching of client data traffic and central authentication via the WLC) and Bridge
/Mesh mode (enabling wireless backhaul when no wired Ethernet uplink is available). In a branch environment without wired backhaul, a standard FlexConnect AP (Option D) cannot operate because FlexConnect still requires an Ethernet connection for its control plane. Bridge mode alone provides mesh backhaul but does not support the local switching with central authentication model required here. MAP (Option A) is a Mesh Access Point role for wireless backhaul, and RAP (Option C) is a Root Access Point with a wired connection - neither meets the no-wired-backhaul requirement with local switching.
Flex+Bridge uniquely satisfies both requirements: the Flex component allows locally switched VLANs to be bridged directly to the access layer without traversing the WAN, while the Bridge component enables the AP to use a wireless mesh link for its backhaul uplink. Central authentication is maintained via the CAPWAP control tunnel over the mesh link. Reference: WLSD Study Guide - FlexConnect Design, Mesh Networking, Flex+Bridge Mode Configuration and Use Cases.
NEW QUESTION # 86
A retail customer opened two new branch locations, and the main store HQ handles data center operations.
Each branch location has three Cisco Catalyst 9130 APs. The data center has a Catalyst 9800 WLC with 18 Catalyst 9130 APs. Growing business and poor WAN uplinks cause impacted branch AP and wireless client connectivity back to HQ, and each branch location is now planned to have its own EWC controller based on C9130 AP to keep traffic local. This new design must accommodate: guests and employees sharing the same WLAN with different VLANs, guest uplink and downlink traffic restricted to 2 Mbps, and each branch acting as secondary or tertiary backup to another branch with the data center WLC always being the primary. Which design approach should the consulting engineer take?
Answer: A
Explanation:
This multi-constraint design scenario requires precise alignment of EWC architecture, N+1 redundancy hierarchy, AAA integration, and WLAN security policies. Option B correctly addresses all requirements.
With only three APs per branch and a requirement to keep traffic local, converting a single C9130 to EWC mode is the correct and resource-efficient approach - converting two APs to EWC (Options A and C) wastes AP capacity in a small three-AP branch. The preferred controller set to the EWC AP ensures local APs join locally. The HQ WLC as primary N+1 backup satisfies the data center WLC always being primary requirement. Other branches ' EWC APs configured as secondary and tertiary controllers creates the cross- branch redundancy hierarchy. Since guests and employees share the same SSID but require different VLANs, MAC Authentication Bypass (MAB) with AAA override allows the HQ ISE/AAA server to return VLAN attributes based on device or user identity - dynamically assigning the correct VLAN at the policy level. The
2 Mbps guest rate limiting is applied through per-client QoS policies on the EWC. Option D ' s use of local web auth for guests does not enable dynamic VLAN assignment from AAA. Reference: WLSD Study Guide
- EWC Architecture, N+1 Redundancy Hierarchy, AAA Override and Dynamic VLAN Assignment.
NEW QUESTION # 87
......
Our 300-110 study tool prepared by our company has now been selected as the secret weapons of customers who wish to pass the exam and obtain relevant certification. If you are agonizing about how to pass the exam and to get the Cisco certificate, now you can try our 300-110 learning materials. Our reputation is earned by high-quality of our 300-110 Learning Materials. Once you choose our 300-110 training materials, you chose hope. Our 300-110 learning materials are based on the customer's point of view and fully consider the needs of our customers.
300-110 Actual Tests: https://www.vceengine.com/300-110-vce-test-engine.html