最新SRAN-Radio-Network-Performance-Optimization題庫資訊，SRAN-Radio-Network-Performance-Optimization考試證照綜述

人之所以能，是相信能。PDFExamDumps之所以能幫助每個IT人士，是因為它能證明它的能力。PDFExamDumps Nokia的SRAN-Radio-Network-Performance-Optimization考試培訓資料就是能幫助你成功的培訓資料，任何限制都是從自己的內心開始的，只要你想通過t Nokia的SRAN-Radio-Network-Performance-Optimization考試認證，就會選擇PDFExamDumps，其實有時候成功與不成功的距離很短，只需要後者向前走幾步，你呢，向前走了嗎，PDFExamDumps是你成功的大門，選擇了它你不能不成功。

Nokia SRAN-Radio-Network-Performance-Optimization Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Quality of Service and Resource Management	15%	- QoS parameters, scheduling and admission control - Radio resource management and optimization
Topic 2: Advanced Optimization and SON Features	10%	- Energy saving and advanced features - Self-Organizing Networks (SON) use cases and optimization
Topic 3: Mobility and Handover Optimization	20%	- Handover parameters and algorithms - Mobility robustness and optimization - Inter-RAT mobility and optimization
Topic 4: Coverage and Capacity Optimization	30%	- Interference analysis and mitigation techniques - Coverage analysis, tuning and optimization - Capacity planning, load balancing and optimization
Topic 5: SRAN Performance Optimization Fundamentals	25%	- Network performance monitoring and analysis tools - Performance optimization principles and methodology - Key performance indicators (KPIs) definition and measurement

最新SRAN-Radio-Network-Performance-Optimization題庫資訊使傳遞MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510有效資料更方便

我們PDFExamDumps Nokia的SRAN-Radio-Network-Performance-Optimization考試的問題包含了完整的無限制的轉儲，所以你很容易的通過考試，不管你是通過你的產品合格證或是其他當今流行的身份驗證，完美的展現PDFExamDumps Nokia的SRAN-Radio-Network-Performance-Optimization考試培訓資料的長處，這不僅僅是依靠，也是指導，這其實是最好的，你可以使用PDFExamDumps Nokia的SRAN-Radio-Network-Performance-Optimization考試培訓資料裏的問題和答案通過考試，獲得Nokia的SRAN-Radio-Network-Performance-Optimization考試認證。

最新的 MN: NCSS NPS - SRAN SRAN-Radio-Network-Performance-Optimization 免費考試真題 (Q13-Q18):

問題 #13
What is the mandatory prerequisite to implement DSS , or Dynamic Spectrum Sharing ?

A. TDD configuration only
B. RF module sharing
C. Dedicated NR spectrum
D. Same bandwidth for LTE and NR

答案：B

解題說明：
The correct answer is D .
DSS allows LTE and 5G NR to share the same spectrum dynamically , instead of requiring a separate dedicated NR carrier. Therefore, dedicated NR spectrum is not mandatory. DSS is also not limited to TDD only; it is commonly used in FDD spectrum refarming scenarios as well. Public RAN references describe DSS as a mechanism where LTE and NR coexist in the same frequency band and share spectrum dynamically.
From an SRAN architecture point of view, the mandatory deployment condition is that the radio platform must support LTE and NR coexistence on the same radio resources. That requires RF module sharing or a DSS-capable shared radio configuration.
So the correct prerequisite is:
RF module sharing.

問題 #14
Which of the following statements does not apply to mmWave radio propagation ?

A. Building penetration losses at mmWave frequencies can prevent practical outdoor-to-indoor coverage solutions.
B. Foliage and vegetation attenuation is high.
C. Water absorption is low at high frequencies.
D. Diffraction loss increases with frequency.

答案：C

解題說明：
The correct answer is C .
At mmWave / FR2 frequencies , radio propagation is more challenging than in low-band or mid-band spectrum. Diffraction becomes weaker, blockage is more severe, foliage attenuation is high, and building penetration loss is significant. This is why mmWave networks usually require dense site grids, line-of-sight or near-line-of-sight paths, and strong beamforming. Industry mmWave references consistently describe high path loss, high penetration loss, and the need for directional antenna systems to compensate for these losses.
Option C does not apply because water absorption and atmospheric absorption generally become more relevant at higher frequencies, not lower. Rain, humidity, and oxygen/water-vapor absorption are important considerations for mmWave link budgets.
So the statement that does not apply to mmWave propagation is:
Low water absorption at high frequencies.

問題 #15
Evaluate the impact of extended FR2 cell range on power consumption.

A. It reduces power consumption by optimizing beamforming.
B. It has no impact on power consumption.
C. It increases power consumption because UEs need more energy to transmit uplink signals.
D. It decreases power consumption due to better radio conditions.

答案：C

解題說明：
The correct answer is C .
In FR2/mmWave , uplink coverage is often the limiting factor because UE transmit power is much lower than gNodeB transmit power, and mmWave propagation suffers from high path loss and blockage. Ericsson's mmWave coverage discussion also notes that high-band coverage is limited by uplink signal quality and high- band propagation characteristics.
When the FR2 cell range is extended, UEs farther from the serving cell must transmit uplink signals over a more difficult radio path. This usually requires higher UE transmit power, more robust MCS, more repetitions or retransmissions, and potentially longer uplink activity. As a result, UE battery consumption can increase.
Therefore, extended FR2 range generally:
Increases power consumption because UEs need more energy to transmit uplink signals.

問題 #16
In a high-mobility network, the maximum cell size must be restricted to 33 km . Which PRACH format and restricted-set type should be used?

A. Format 1 / Type A
B. Format 0 / Type B
C. Format 1 / Type B
D. Format 2 / Unrestricted Type

答案：C

問題 #17
In the context of mmWave deployments , what is the primary benefit of analog beamforming ?

A. It allows dynamic beam switching between different panels.
B. It offers low cost and low complexity for coverage at higher mmWave bands.
C. It increases the number of supported UEs per sector.
D. It supports multiple beams per antenna panel.

答案：B

解題說明：
The correct answer is A .
In mmWave systems, beamforming is essential because FR2 signals suffer from high path loss and blockage.
Analog beamforming uses fewer RF chains than fully digital beamforming, so it is cheaper and less complex in terms of RF hardware, power consumption, and implementation. Research and industry references explain that analog and hybrid beamforming architectures reduce the number of required ADCs/RF chains compared with fully digital beamforming, lowering cost and power complexity.
However, analog beamforming has limitations. It usually forms one beam, or a limited number of beams, at a time from a panel. Supporting multiple independent simultaneous beams and more UEs per sector is more associated with digital or hybrid beamforming, not pure analog beamforming.
Therefore, the primary benefit is:
Low cost and low complexity for coverage at higher mmWave bands.

問題 #18
......

PDFExamDumps的Nokia專家團隊利用自己的知識和經驗專門研究了最新的短期有效的培訓方式，這個培訓方法對你們是很有幫助的，可以讓你們短期內達到預期的效果，特別是那些邊工作邊學習的考生，可以省時有不費力。選擇PDFExamDumps的培訓資料你將得到你最想要的SRAN-Radio-Network-Performance-Optimization培訓資料。

SRAN-Radio-Network-Performance-Optimization考試證照綜述: https://www.pdfexamdumps.com/SRAN-Radio-Network-Performance-Optimization_valid-braindumps.html