In todayโs society, there are increasingly thousands of people put a priority to acquire certificates to enhance their abilities. With a total new perspective, JN0-364 study materials have been designed to serve most of the office workers who aim at getting a JN0-364 certification. The JN0-364 test guide offer a variety of learning modes for users to choose from, which can be used for multiple clients of computers and mobile phones to study online, as well as to print and print data for offline consolidation. We sincere hope that our JN0-364 Exam Questions can live up to your expectation.
| Section | Objectives |
|---|---|
| Topic 1: Open Shortest Path First (OSPF) | - Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
|
| Topic 2: Protocol-Independent Routing | - Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
|
| Topic 3: Border Gateway Protocol (BGP) | - Identify the concepts, operation, or functionality of BGP
|
| Topic 4: Spanning Tree Protocols | - Identify the concepts, operation, or functionality of STP
|
| Topic 5: Multiprotocol Label Switching (MPLS) | - Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
|
| Topic 6: Intermediate System to Intermediate System (IS-IS) | - Identify the concepts, operation, or functionality of IS-IS
|
| Topic 7: Layer 2 Bridging or VLANs | - Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
|
| Topic 8: IPv6 | - Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6 - Identify the concepts, operation, or functionality of IPv6
|
>> Juniper JN0-364 Exam Vce <<
The passing rate is the best test for quality of our JN0-364 study materials. And we can be very proud to tell you that the passing rate of our JN0-364 Exam Questions is almost 100%. That is to say, as long as you choose our study materials and carefully review according to its content, passing the JN0-364 Exam is a piece of cake. We're definitely not exaggerating. If you don't believe, you can give it a try.
NEW QUESTION # 100
Which two events cause a static route to be removed from a routing table? (Choose two.)
Answer: C,D
Explanation:
In Junos OS, astatic routeis a manually configured entry in the routing table. Unlike dynamic routes, which have built-in timers and aging mechanisms, static routes are generally "permanent" as long as their conditions for validity are met.
1. Manual Removal (Option A):
Since static routes are explicitly defined by the administrator, the most direct way to remove one is through a configuration change. Using the delete routing-options static route <prefix> command followed by a commit will immediately remove the route from the Routing Information Base (RIB).
2. Next-Hop Reachability (Option B):
For a static route to be "active" and installed in the forwarding table, itsnext-hop must be reachable. If a static route points to a specific physical interface or an IP address on a local segment, and thatoutbound interface becomes unavailable(e.g., the link goes "Down"), the Junos kernel detects that the next-hop is no longer viable. Consequently, the route is marked as "hidden" or "inactive" and is removed from the active forwarding table to prevent traffic from being black-holed.
Why other options are incorrect:
* Aging (Option C):Static routes do not have an expiration timer based on traffic. Even if no packet is sent for years, the route remains as long as the interface is up.
* Remote Reachability (Option D):Standard static routes only track the status of the local interface or the immediate next-hop. They do not possess "end-to-end" visibility. If a host two hops away fails, the local router has no way of knowing this via the static route itself. To achieve this level of tracking, features likeRPM (Real-time Performance Monitoring)orBFD (Bidirectional Forwarding Detection)must be linked to the static route.
NEW QUESTION # 101
Which two statements about the BGP path selection process are correct? (Choose two.)
Answer: A,C
NEW QUESTION # 102
You are asked to configure the OSPF environment to prevent the DRother routers from participating in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?
Answer: D
Explanation:
To prevent a router from participating in the OSPF designated router (DR) and backup designated router (BDR) election process, you set the OSPF priority to 0 on the interfaces of that router. This tells OSPF that the router on those interfaces is not to be considered for election as either DR or BDR, effectively making them DRother routers. The exhibit indicates that this is the desired configuration, and therefore the correct command to issue on the Juniper device would be to set the priority to 0 on the relevant interfaces.
NEW QUESTION # 103
Which BGP attribute is used to detect routing loops?
Answer: A
NEW QUESTION # 104
Which feature allows Junos OS to perform recursive lookups for static route next hops?
Answer: C
Explanation:
The resolve option enables recursive next-hop resolution for static routes in Junos OS. When configured, the router performs a lookup in the routing table to determine how to reach the specified next-hop address, allowing the next hop to be resolved through another route instead of requiring it to be directly connected.
NEW QUESTION # 105
......
Additionally, all operating systems also support this format. The third format is the desktop JN0-364 Practice Exam software. It is ideal for users who prefer offline JN0-364 exam practice. This format is supported by Windows computers and laptops. You can easily install this software in your system to use it anytime to prepare for the examination.
New JN0-364 Test Price: https://www.validbraindumps.com/JN0-364-exam-prep.html