It is evident to all that the AZ-802 test torrent from our company has a high quality all the time. A lot of people who have bought our products can agree that our AZ-802 test questions are very useful for them to get the certification. There have been 99 percent people used our AZ-802 Exam Prep that have passed their exam and get the certification. It means that our AZ-802 test questions are very useful for all people to achieve their dreams, and the high quality of our AZ-802 exam prep is one insurmountable problem.
| Section | Objectives |
|---|---|
| Secure Windows Server hybrid infrastructures | - Identity and access management
|
| Networking and storage infrastructure | - Storage management
|
| Manage hybrid compute and virtualization | - Containers
|
| Disaster recovery and migration | - Backup and restore
|
| Implement and manage high availability | - Load balancing and redundancy
|
| Monitoring and troubleshooting | - Diagnostics
|
>> Microsoft AZ-802 Sample Exam <<
So many candidates have encountered difficulties in preparing to pass the AZ-802 exam. But our study materials will help candidates to pass the exam easily. Our AZ-802 guide questions can provide statistics report function to help the learners to find weak links and deal with them. The AZ-802 Test Torrent boost the function of timing and simulating the exam. They set the timer to simulate the exam and help the learners adjust the speed and keep alert. So the AZ-802 guide questions are very convenient for the learners to master and pass the exam.
NEW QUESTION # 575
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a failover cluster named Cluster1 that hosts an application named App1. The General tab in App1 Properties is shown in the General exhibit: Preferred Owners lists Server1 and Server2, both unchecked, with the Up/Down reordering controls disabled; Priority is Medium; the role is Running on Server2. The Failover tab in App1 Properties is shown in the Failover exhibit: Maximum failures in the specified period is 3, Period (hours) is 6, and Failback is currently set to " Allow failback " / " Immediately. " Server1 shuts down unexpectedly. You need to ensure that when you start Server1, App1 continues to run on Server2. Solution:
From the General settings, you move Server2 up. Does this meet the goal?
App1 Properties - General tab
App1 Properties - Failover tab
Answer: B
Explanation:
The General tab ' s Preferred Owners list shows both Server1 and Server2 with their checkboxes cleared, and with the Up/Down reordering controls disabled as a direct consequence -- a server must first be selected as a preferred owner before it can be reordered within that list at all. In this state, attempting to move Server2 up is not an actionable configuration change, since the control is disabled. Even in a hypothetical state where preferred owners had been selected and reordering were possible, changing preferred-owner order only influences which node is chosen first among the preferred owners when a role starts or fails over -- it does not, by itself, disable the " Allow failback " behavior shown on the Failover tab, which remains set to " Immediately. " That means App1 could still fail back automatically under a preferred-owner configuration, unlike the deterministic Prevent Failback setting. Because reordering is not even possible in the current configuration, and would not reliably prevent failback even if it were, this solution does not meet the goal.
NEW QUESTION # 576
You have a server named Server1 that runs Windows Server and has the Hyper-V server role installed.
Server1 contains a virtual machine named VM1 that runs Windows Server. You need to install the Hyper-V server role on VM1. Which PowerShell command should you run first? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Set-VMProcessor VM1 -ExposeVirtualizationExtensions $true
Installing the Hyper-V role inside a virtual machine -- running Hyper-V as a nested hypervisor on top of another Hyper-V host -- requires nested virtualization to be explicitly enabled for that specific VM, because a virtual processor does not, by default, expose the hardware virtualization extensions (Intel VT-x/EPT or AMD-V) that a guest hypervisor needs to create and run its own virtual machines. This is enabled on the Hyper-V host (Server1), targeting the guest VM, with Set-VMProcessor -VMName VM1 - ExposeVirtualizationExtensions $true, run before Hyper-V is installed inside VM1; only after virtualization extensions are exposed to VM1 can the Hyper-V role be installed and function correctly inside that guest. Set- VMHost configures host-wide Hyper-V settings such as default storage/VM paths or NUMA spanning and has an -EnableEnhancedSessionMode-equivalent policy setting for the VMConnect enhanced session experience, but it has no role in enabling nested virtualization. Set-VM, Set-VMFirmware, and Set- VMSecurity configure other unrelated VM properties (general VM settings, boot firmware/Secure Boot, and security features such as Shielded VM/vTPM, respectively) and do not control virtualization extension exposure. Therefore, the required first command is Set-VMProcessor VM1 -ExposeVirtualizationExtensions
$true, run on Server1.
NEW QUESTION # 577
You need to meet the technical requirements for VM1. Which cmdlet should you run first? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Set-VMProcessor -VMName VM1 -ExposeVirtualizationExtensions $true
The requirement is to run virtual machines on VM1 itself, which means enabling nested virtualization so that VM1 (a guest VM hosted on Server2) can install Hyper-V and host its own virtual machines. Nested virtualization on Hyper-V requires the parent VM ' s virtual processor to expose the host ' s hardware virtualization extensions (Intel VT-x or AMD-V) through to the guest. This is done with the Set-VMProcessor cmdlet using the -ExposeVirtualizationExtensions parameter set to $true, run against VM1 from the Hyper-V host (Server2): Set-VMProcessor -VMName VM1 -ExposeVirtualizationExtensions $true. VM1 must be turned off before this setting can be applied, and after it is applied, VM1 needs the Hyper-V role installed inside the guest before it can run its own VMs. Set-VM, Set-VMBios, Set-VMHost, and Set-VMFirmware do not control virtualization extension exposure: Set-VM manages general VM configuration such as memory and name, Set-VMHost configures host-wide settings, and Set-VMFirmware/Set-VMBios control boot and firmware settings for generation 2 and generation 1 VMs respectively. Only Set-VMProcessor with - ExposeVirtualizationExtensions satisfies the stated requirement, making it the correct first step.
NEW QUESTION # 578
You are planning the data share migration to support the on-premises migration plan. What should you use to perform the migration?
Answer: D
Explanation:
Storage Migration Service is purpose-built to inventory the data, security descriptors, and both share-level and NTFS-level permissions on a source file server such as Fileserver1, transfer that data to a destination server such as Fileserver2, and then perform a cutover that reassigns the source server ' s network identity -- its computer name and IP address -- to the destination server. That cutover step is precisely what allows the existing \\Fileserver1\Data UNC path, already relied upon by the Chicago office application, to continue working unchanged after the migration, since client requests to that path transparently resolve to Fileserver2 once it has taken on Fileserver1 ' s identity. The Microsoft File Server Migration Toolkit and Windows Server Migration Tools are older, largely superseded utilities that can move some file server settings but do not provide this automated inventory-transfer-and-cutover workflow, and neither preserves the source server ' s identity on the destination the way Storage Migration Service does, meaning the UNC path would need to be manually updated or redirected. File Server Resource Manager (FSRM) is a quota, file-screening, and storage- reporting feature entirely unrelated to migrating data between servers. Therefore, Storage Migration Service is the correct tool to perform this migration while preserving the existing UNC path.
Topic 5, Case Study 5: Contoso, Ltd. (New)This is a case study. Case
studies are not timed separately. You can use as much exam time as
you would like to complete each case. However, there may be
additional case studies and sections on this exam. You must manage
your time to ensure that you are able to complete all questions
included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
Overview: Contoso, Ltd. is a manufacturing company that has a main office in Seattle and branch offices in Los Angeles and Montreal.
Existing Environment -- Active Directory Environment: Contoso has an on-premises Active Directory Domain Services (AD DS) domain named contoso.com that syncs with a Microsoft Entra ID tenant. The AD DS domain contains the domain controllers shown in the following table.
Domain controllers
Contoso recently purchased an Azure subscription.
The functional level of the forest is Windows Server 2012 R2. The functional level of the domain is Windows Server 2012. The forest has the Active Directory Recycle Bin enabled.
The contoso.com domain contains the users shown in the following table.
Users
The contoso.com domain has the Group Policy Objects (GPOs) shown in the following table.
Group Policy Objects
The contoso.com domain has the Password Settings Objects (PSOs) shown in the following table.
Password Settings Objects
Server Infrastructure: The contoso.com domain contains servers that run Windows Server 2022 as shown in the following table.
Servers
By using Windows Firewall with Advanced Security, the servers have isolation connection security rules configured as shown in the following table.
Isolation connection security rules
Server4 has no connection security rules.
Server4 Configurations: Server4 has the effective Group Policy settings for user rights as shown in the following table.
Server4 effective user rights
Server4 has the disk configurations shown in the following exhibit.
-- Disk 0 (127.00 GB, Basic, Online): System Reserved (100 MB, NTFS, Healthy System partition); C:
(126.39 GB, NTFS, Healthy Boot/Page File/Crash Dump/Primary partition); a 523 MB Healthy Recovery partition.
-- Disk 1 (127.00 GB, Basic, Online): D: Data (127.00 GB, NTFS, Healthy Primary partition).
-- Disk 2 (127.00 GB, Basic, Online): E: Data (127.00 GB, ReFS, Healthy Primary partition).
-- Disk 3 (127.00 GB, Basic, Online): F: Data (127.00 GB, ReFS, Healthy Primary partition).
Virtualization Infrastructure: The contoso.com domain has the Hyper-V failover clusters shown in the following table.
Server4 disk configuration (Disk Management)
Hyper-V failover clusters
NEW QUESTION # 579
Your network contains two Active Directory Domain Services (AD DS) forests as shown below.
The contoso.com forest contains:
* contoso.com
* corp.contoso.com
* apps.contoso.com
The fabrikam.com forest contains:
* fabrikam.com
* sales.fabrikam.com
* marketing.fabrikam.com
You need to configure a trust relationship between the forests. The solution must meet the following requirements:
* Enable users from any fabrikam.com domain to access authorized resources in any contoso.com domain.
* Prevent contoso.com users from accessing fabrikam.com resources through the trust.
* Require explicit client computer-level authentication before fabrikam.com users can authenticate to contoso.com servers.
What should you do?
Answer: C
Explanation:
A forest trust is required because access must extend between all domains in the two forests rather than only between a single domain pair. The required direction is one-way: contoso.com must be the trusting forest and fabrikam.com the trusted forest, allowing Fabrikam users to access authorized Contoso resources without permitting the reverse access path. Selective authentication must also be enabled because the requirement calls for explicit authorization before trusted-forest users can authenticate to individual resource computers.
With selective authentication, administrators grant the Allowed to Authenticate permission on the relevant computer objects. Forest-wide authentication would allow Fabrikam users to authenticate broadly to resources throughout the trusting forest, which violates the explicit-authentication requirement. An external trust would not provide forest-wide transitivity across all child domains. Microsoft Learn
NEW QUESTION # 580
......
Time is nothing; timing is everything. Stop hesitating. AZ-802 VCE dumps help you save time to clear exam. If you choose valid exam files, you will pass exams one-shot; you will obtain certification in the shortest time with our Microsoft VCE dumps. If you complete for a senior position just right now, you will have absolutely advantage over others. Now, don't wasting time again, just start from our AZ-802 VCE Dumps. Excellent & valid VCE dumps will make you achieve your dream and go to the peak of your life ahead of other peers.
Latest AZ-802 Exam Pattern: https://www.dumpsking.com/AZ-802-testking-dumps.html