受験者の多くは、350-101試験問題のソフトバージョンが好きです。 350-101ガイドトレントのソフトウェアは、さまざまな自己学習および自己評価機能を強化して、学習の結果を確認します。このCiscoソフトウェアは、学習者が脆弱なリンクを見つけて対処するのに役立ちます。 350-101試験問題は、タイミング機能と試験を刺激する機能を高めます。当社の製品はタイマーを設定して試験を刺激し、速度を調整してアラートを維持します。そのため、350-101試験問題を購入する価値があります。
| Section | Weight | Objectives |
|---|---|---|
| Wireless Monitoring and Management | 25% | - Monitoring and troubleshooting
|
| Automation and AI | 10% | - Automation technologies
|
| RF Fundamentals | 15% | - RF characteristics
|
| 802.11 Technology Fundamentals | 20% | - Wireless standards and operations
|
| Wireless Client Connectivity | 30% | - Client access and security
|
350-101認証試験に合格することは他の世界の有名な認証に合格して国際の承認と受け入れを取ることと同じです。350-101認定試験もIT領域の幅広い認証を取得しました。世界各地で350-101試験に受かることを通じて自分のキャリアをもっと向上させる人々がたくさんいます。CertJukenで、あなたは自分に向いている製品をどちらでも選べます。
質問 # 108
Refer to the exhibit. An onsite engineer is working to connect devices to the wireless network in a corporate environment. The network requirements dictate that WPA2-Enterprise security must be used with certificate-based mutual authentication to align with enterprise policy, which requires client and server certificates for secure access. After the initial wireless settings are applied on a Windows-based workstation, the engineer must select the appropriate authentication method in the client network properties to complete a successful enterprise Wi-Fi connection. Which option in the "Choose a network authentication method" dropdown meets this requirement?
正解：B
解説：
The correct authentication method is EAP-TLS. WPA2-Enterprise uses 802.1X/EAP authentication rather than a pre-shared key, and the supplicant, authenticator, and RADIUS authentication server participate in the enterprise authentication exchange. Cisco documentation states that in enterprise WPA/WPA2 operation, 802.1X/EAP is used for authentication and provides strong authentication between the client and authentication server.
The decisive requirement in the question is certificate-based mutual authentication requiring both client and server certificates. Cisco explicitly describes EAP-TLS as requiring both server-side and client-side certificates, while PEAP requires only a server-side certificate and normally authenticates the client with password-based credentials inside the protected tunnel. Cisco Secure ACS documentation also states that EAP-TLS uses the certificates of the authentication server and the end-user client, enforcing mutual authentication.
質問 # 109
A retail store has a Cisco 9176 FlexConnect AP at a branch location and must ensure that wireless clients continue to access the network even if the WAN link to the central controller is down. The AP must authenticate users locally during outages and still sync with the controller when connectivity is restored. The IT administrator wants centralized management for all APs but requires high availability for branch users.
Which set of CLI commands on the 9800 WLC configures the AP to meet these requirements?
正解：D
解説：
The correct answer isD. On a Cisco Catalyst 9800 WLC, FlexConnect behavior is configured throughwireless policy profiles, not legacy AireOS-style config wlan ... syntax. Cisco documents that FlexConnect is intended for remote-office deployments where APs are managed centrally across the WAN, while still being capable of switching traffic locally and performing local client authentication when controller connectivity is lost.
For local authentication on a Catalyst 9800 policy profile, the correct CLI action is to enter wireless profile policy < policy-name > and apply no central authentication. Cisco's configuration guide states that no central authentication disables central authentication and enables local authentication. This directly satisfies the requirement that clients authenticate locally during WAN outages while the AP remains part of a centrally managed 9800 deployment when connectivity is restored.
Option C uses descriptive terminology but not the correct Catalyst 9800 parser syntax. Option A resembles older AireOS-style WLAN configuration and does not configure local authentication. Option B is not a valid
9800 FlexConnect authentication command. In a complete production branch design, local switching and Flex profile/site tag mapping must also be validated, but the command required for the authentication behavior shown in the options isno central authentication. Reference topic:Wireless Network Implementation - FlexConnect, Catalyst 9800 policy profiles, local authentication, WAN resiliency, and branch AP design.
質問 # 110
Refer to the exhibit. An engineer is preparing a Cisco 9800-L WLC for deployment in a sensitive area. Only encrypted remote management via SSH is allowed, and all other VTY access methods must be disabled. The 9800-L WLC will be part of a larger deployment, and an external audit will check for any unencrypted management protocols. According to the requirements, only SSH is allowed for remote CLI sessions. Which set of commands must be executed to complete the Cisco IOS XE CLI configuration on the WLC?
正解：D
解説：
The correct configuration is option C because Cisco IOS XE restricts inbound protocols on VTY lines with the transport input command. Cisco's Catalyst 9800 best-practice guidance states that administrators should confirm SSH is enabled and Telnet is disabled for better controller security, and that the Catalyst 9800 follows standard Cisco IOS XE behavior for enabling or disabling Telnet and SSH. Cisco IOS XE SSH documentation explicitly shows line vty line_number
[ending_line_number] followed by transport input ssh, and explains that this prevents non-SSH Telnet connections, limiting access to SSH only.
The existing exhibit already includes the SSH prerequisites: hostname, domain name, RSA key generation, AAA new-model, a default login method using local credentials, and a local privileged user. The missing VTY configuration must therefore apply that default AAA login list to the VTY lines with login authentication default and restrict inbound transport to SSH. Cisco AAA documentation confirms that login authentication default applies the configured default authentication list to the line or set of lines. Option A is incomplete and does not explicitly permit SSH. Option B uses invalid syntax. Option D omits the required input keyword.
質問 # 111
An engineer has been tasked with configuring a Cisco Catalyst 9100 AP to join a WLC using a static configuration as DHCP and DNS discovery methods are not available. The engineer has set the AP hostname to `AP053540555', and has configured the AP with a static IP address, subnet mask, and default gateway. The engineer must now configure the AP to discover the primary WLC with hostname `WLC-PRIMARY' and IP address `192.168.100.10'. Which CLI command must the engineer use on the AP?
正解：A
解説：
The correct AP-side command is capwap ap primary-base WLC-PRIMARY 192.168.100.10.
Cisco's Catalyst AP command reference shows the syntax for configuring the primary controller as capwap ap primary-base <controller-name> <controller-ip-address>, and provides the same structure in its example: capwap ap primary-base wlc-5520 209.165.200.224. Cisco's Catalyst
9800 AP join documentation also identifies the primary controller discovery entry as capwap ap primary-base <wlc-hostname> <wlc-IP-address>.
This command statically primes the lightweight AP with the preferred WLC when DHCP option
43, DNS discovery, broadcast discovery, or prior learned controller information is unavailable.
The hostname AP053540555 is only the AP's local identity and is not part of the WLC discovery command. Option A omits the primary-base keyword, so it is not valid syntax. Option B places keywords in the wrong order and does not match Cisco CAPWAP AP CLI. Option C omits the required controller name before the IP address.
質問 # 112
Refer to the exhibit. An engineer is setting up a new WLC in a branch office. The IT security policy states that all management access must use encrypted protocols, administrators will connect remotely, and network scans will be run to check for any noncompliant management protocol exposure. Which action must the engineer take to achieve the required management access policy?
正解：A
解説：
The correct action is to expose only encrypted management services: HTTPS for WebUI administration and SSH for remote CLI administration. The exhibit confirms the WLC wireless management interface is VLAN 10 with IP address 10.10.1.2, but interface placement alone does not enforce secure management protocol policy. Cisco Catalyst 9800 documentation identifies web admin settings as controller management configuration that determines administrator access, protocols, and interfaces for remote management. Cisco further states that administrators can connect securely over HTTPS, while HTTP "is not a secure connection," and that HTTPS encrypts data to and from the server.
For CLI access, Cisco's Catalyst 9800 Secure Shell guidance states that SSH enables secure remote access, and using transport input ssh prevents non-SSH Telnet connections, limiting the device to SSH-only access. Therefore, options A and B violate policy because they permit Telnet and/or HTTP. Option C fails because console access is local, not remote, and disabling only HTTP still leaves Telnet exposure unresolved.
質問 # 113
......
350-101認証試験に参加して、認証を取得するのはIT業界で働いている人にとって必要があることです。この認証をもらったら、給料の増加とプロモーションのチャンスをもらえることができます。我々の350-101練習問題があって、あなたは速く成功を収穫することができます。多くのIT業界の人がもう行動しました。350-101試験を準備しているあなたも速く行動しましょう。
350-101ウェブトレーニング: https://www.certjuken.com/350-101-exam.html