每個人都有自己的人生規劃，選擇不同得到的就不同，所以說選擇很重要。NewDumps Microsoft的AZ-802考試認證培訓資料是幫助每個IT人士實現自己人生宏偉目標的最好的方式方法，它包括了試題及答案，並且和真實的考試題目不相上下，真的是所謂稱得上是最好的別無二選的培訓資料。
| Section | Objectives |
|---|---|
| Topic 1: Hybrid infrastructure management | - Monitoring and update management
|
| Topic 2: Networking and high availability | - Networking infrastructure
|
| Topic 3: Secure and manage Windows Server environments | - Security and compliance
|
| Topic 4: Compute, storage, and virtualization | - Virtual machines and containers
|
不管你參加AZ-802認證的哪個考試，NewDumps的參考資料都可以給你很大的幫助。因為NewDumps的考試考古題包含實際考試中可能出現的所有問題，並且可以給你詳細的解析讓你很好地理解AZ-802考試試題。只要你認真學習了NewDumps的考古題，你就可以輕鬆地通過你想要參加的考試。
問題 #358
Your network contains an Active Directory Domain Services (AD DS) domain that has a Windows Server
2012 R2 forest and domain functional level. The domain contains the domain controllers shown in the following table. You need to ensure that you can deploy a new domain controller that runs Windows Server
2025. The solution must minimize administrative effort. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
Domain controllers and operating systems table
答案：C,D
解題說明：
Windows Server 2016 remains the highest Active Directory forest and domain functional level that exists in the product line, since no separate, higher functional level was introduced alongside the release of Windows Server 2019, 2022, or 2025, and Windows Server 2016 is also documented as the minimum functional level that must be in place before a domain controller running Windows Server 2025 can be added to a domain. In this scenario, DC1 is still running the much older Windows Server 2012 R2, which sits below the Windows Server 2016 baseline required for raising the functional level, and as long as DC1 remains present and running that older version, the forest and domain functional level cannot be raised past Windows Server 2012 R2.
Because DC2 and DC3 are already running Windows Server 2016, removing (demoting and decommissioning) only DC1 is sufficient to clear the way, after which the forest and domain functional level can be raised directly to Windows Server 2016 using the two remaining domain controllers, without needing to upgrade any domain controller ' s operating system version at all. This combination, removing DC1 and raising the functional level to Windows Server 2016, satisfies the requirement to minimize administrative effort while still enabling a Windows Server 2025 domain controller to be added afterward.
問題 #359
You have an Azure virtual machine named VM1. You enable Microsoft Defender SmartScreen on VM1. You need to ensure that the SmartScreen messages displayed to users are logged. What should you do?
答案：A
解題說明：
Microsoft Defender SmartScreen writes its notification and warning events to the Microsoft-Windows- SmartScreen/Debug event log, which is hidden by default in Event Viewer along with all other Analytic and Debug logs. An administrator must open Event Viewer, select View > Show Analytic and Debug Logs to reveal the hidden log category, and then explicitly enable that Debug log so the SmartScreen prompt events shown to users are actually captured and retained for later review; without enabling it, the events are generated in memory but not persisted or visible. Running WinRM quickconfig only configures the Windows Remote Management listener and has no relationship to SmartScreen logging. Modifying the Advanced Audit Policy Configuration settings governs security auditing categories such as logon events and object access, not SmartScreen ' s own debug telemetry. Configuring Virus & threat protection settings in the Windows Security app manages antivirus and ransomware protection features, not SmartScreen event logging. Therefore, enabling the Debug log in Event Viewer is the correct action.
問題 #360
You have an on-premises server that runs Windows Server and contains a folder named Folder1. Folder1 contains 50 GB of files.
You have an Azure subscription that contains an Azure Files share named share1.
You need to migrate the data in Folder1 to share1.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
答案：
解題說明：
Explanation:
Deploy to Azure: An Azure Storage account. Install on Server1: The Azure File Sync agent.
An Azure Files share such as share1 is always hosted inside an Azure Storage account, so an Azure Storage account is what share1 is actually deployed into and depends on existing in the subscription; it is not deployed to a Storage Sync Service instance, an Azure Migrate project, an on-premises data gateway, or an ArcBox environment, none of which host file shares. To move Folder1 ' s 50 GB of files from the on-premises server into share1 while keeping both locations synchronized rather than performing a single one-time copy, the documented approach is to install the Azure File Sync agent directly on the on-premises server, then create a sync group that pairs Folder1, registered as a server endpoint, with share1, registered as the cloud endpoint.
Once that sync relationship is established, Azure File Sync uploads Folder1 ' s existing files up to share1 and then keeps both the on-premises folder and the cloud share synchronized going forward, which is Microsoft ' s documented approach for migrating on-premises file server content into Azure Files rather than using the Azure Connected Machine agent, Storage Migration Service, or Storage Replica, none of which target an Azure Files share as their destination in this way.
問題 #361
You have on-premises file servers that run Windows Server as shown in the following exhibit (Server1: D:
\Folder1, E:\Folder2; Server2: D:\Data). You have the Azure file shares shown in the following exhibit (share1: East US; share2: East US). You add a Storage Sync Service named Sync1 and an Azure File Sync sync group named Group1. Group1 uses share1 as a cloud endpoint. You register Server1 and Server2 with Sync1. You add D:\Folder1 from Server1 as a server endpoint in Group1. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
答案：
解題說明：
Explanation:
You can add share2 as a cloud endpoint in Group1: No. You can add E:\Folder2 from Server1 as a server endpoint in Group1: No. You can add D:\Data from Server2 as a server endpoint in Group1: Yes.
Azure File Sync enforces a strict one-to-one relationship between a sync group and its cloud endpoint: a sync group can contain exactly one cloud endpoint, and an Azure file share can be the cloud endpoint of only one sync group. Group1 already uses share1 as its cloud endpoint, so share2 cannot be added as a second cloud endpoint to the same sync group; that statement is No. Separately, Azure File Sync also limits a sync group to only one server endpoint per registered server, regardless of whether the additional path is on a different volume and does not overlap the existing endpoint ' s folder tree. Because Server1 already has D:\Folder1 registered as its server endpoint in Group1, adding a second, independent server endpoint from that same server (E:\Folder2) into the same sync group is not permitted; that statement is also No - to sync E:\Folder2 at all, it would need to go into a different sync group (with its own cloud endpoint). Server2, however, has no existing server endpoint in Group1 yet, so adding D:\Data from Server2 as Group1 ' s server endpoint for that server is a normal, fully supported configuration - every additional registered server can contribute its own single server endpoint to the same sync group, which is exactly how Azure File Sync supports multi-site sync of a common namespace; that statement is Yes.
問題 #362
Technical requirements: Promote a new server named DC4 that runs Windows Server 2022 to a domain controller. Replicate the virtual machines from Cluster2 to an Azure Recovery Services vault. Centrally manage performance alerts in Azure for all the domain controllers. Ensure that User1 can recover objects from the Active Directory Recycle Bin. Migrate Share1 to Server2, including all the share and folder permissions. Back up Server4 and all data to an Azure Recovery Services vault. Use Hyper-V Replica to protect the virtual machines in Cluster3. Implement BitLocker Drive Encryption (BitLocker) on Server4.
Whenever possible, use the principle of least privilege. You need to meet the technical requirements for Share1. What should you use?
答案：C
解題說明：
Storage Migration Service is designed to migrate a file share such as Share1 to a new server (Server2) while carrying over both the share-level and NTFS folder/file permissions, and it can also perform a cutover of the source server ' s name and IP address if a fully transparent migration is later required. This directly satisfies the requirement to migrate Share1 to Server2 including all the share and folder permissions. File Server Resource Manager (FSRM) only provides quota, file-screening, and storage-reporting capabilities and has no mechanism to migrate data, shares, or permissions between servers. Server Manager is a general-purpose administration console with no dedicated share-migration workflow -- it can be used to create shares manually but cannot transfer existing permissions programmatically. Storage Replica performs block-level volume replication intended for disaster recovery and stretch-cluster scenarios rather than a one-time, permission- preserving share migration to a specific destination server. Therefore, Storage Migration Service is the correct tool to migrate Share1 to Server2 while preserving its share and folder permissions.
問題 #363
......
NewDumps有強大的專家團隊不斷為你提供有效的培訓資源，他們不斷利用他們的豐富的經驗和知識研究過去幾年的試題。終於NewDumps的有針對性的練習題和答案問世了，它們對很多參加IT認證考試的人起到了很大的幫助。你現在在網上可以免費下載NewDumps提供的部分關於Microsoft AZ-802認證考試的模擬測試題和答案作為嘗試。通過很多IT專業人士的使用證明NewDumps很可靠。一般如果你使用NewDumps提供的針對性復習題，你可以100%通過Microsoft AZ-802 認證考試。快將NewDumps加入你的購物車吧! 下一個IT行業的成功人士說不定就是你。
AZ-802 PDF題庫: https://www.newdumpspdf.com/AZ-802-exam-new-dumps.html